Just read July Newsletter and it is great to see that K4’s deliveries are
increasing. I was wondering if there is any update on when those of us who
place orders for items like the KIO3BUPKT_KIO3B Upgrade Kit for the K3, might
expect delivery.
Thanks,
Bill - W0BBI
___
Hi Madelyn,
I have a quick question, I was waiting, saving up, to upgrade my K3 with the
KIO3BUpkt-KIO3Bkit. However, now I see the kit is unavailable. Are there any
plans to make anymore of these kits onceyou are all back to full operation?
Thank you, Bill-W0BBI
I currently use my 'Direct Coupled Pan Adapter TX Sensor' to monitor operations
as the final connection just before theantenna, just as I assume other do. Does
anyone know of there will be a provision for K4 to monitor the same
parametersie; power and swr.
73W0BBI
__
Thank you Frank, W3LPL, as you placed me on the right path. It turns out the
mic setting was fine, it was my settings on the Navigator interface that I must
messed up. All is now well.Thanks again,Bill - W0BBI
On Thursday, October 24, 2019, 11:00:32 AM CDT, Bill Wiehe
wrote:
I recen
I recently noticed when operating in any of WSJT-X modes, such as FT8, the
power output on the K3starts out lower than what is initially set then rises to
the set power level over the first five to eight seconds of transmitting.The
power change is not indicated on radios meter, only my external
I have no problem with seeing output power withUtility V. 1.19.2.21 and Beta
MCU 02.09 2/24/2019.Bill - W0BBI
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: ma
Lee KV5M
In response to your question, the K3 Assembly Manual has the KDVR3 Digital
Voice Recorder going in the chassis before the KRX3 Subreceiver. in fact
there is whole separate manual for the subreceiver.
Happy Thanksgiving.73 Bill W0BBI
PS I know you said you have a K3S but I believe t
Please disregard the request for feedback. Figured out it was a cabling issue.
Sorry for taking up band with.
Regards,Bill- W0BBI
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/
When trying to access the K3/K3S beta firmware site
(ftp://ftp.elecraft.com/K3/firmware/beta). I keep receiving the reply that
"The site can't be reached." Anyone know if it is up an running? I have no
blocks on my computer, in fact I tried to reach it on two different machines.
Thanks,Bill
When trying to access the K3/K3S beta firmware site
(ftp://ftp.elecraft.com/K3/firmware/beta). I keep receiving the reply that
"The site can't be reached." Anyone know if it is up an running? I have no
blocks on my computer, in fact I tried to reach it on two different machines.
Thanks,Bill
I have been looking over the on-line manual and I unable to find any reference
that explains how one will connect the P3TXMon Option Coupler to KPA1500 in
order to measure power and swr. Does anyone have any insight.
Thanks,Bill - W0BBI
Dear Zac,
I am not sure how it might work on your KX3, but the K3 will hold the " VFO B
decode" window open on both RX and TX. The setting I discovered to get there is
press "TEXT DEC" button, then use VFO B to select "CW 5-40" (or whatever speed)
then press "TEXT DEC" again. It locks VFO B
Over the course of the last several weeks my P3 Display has developed an
annoying white "flashing or blinking" in the lower half of the display. To be
more accurate, it is in the lower portion of the receive signal display. That
is if I have "labels" enabled, it does not flash/blink in that port
Thanks Barry - K3NDM, for the assistance. Turns out WINDOWS 10 updates and not
only shut off my sound card but changed one of the com ports on my Navigator.
Goes to show that you can't assume anything will be the same after an
update.73,Bill - W0BBI
__
I recently downloaded a JT65 program and after several days of flawless
operation, my K3 stopped transmitting in DATA A mode. The K3 keys but nothing
is transmitted and no power out. I changed over to BPSK31 via HRD using DATA A
with the same results. All the other modes (RTTY FSK, CW, SSB) wor
Thanks Tom for your feedback. I did conduct the test and down to 2 watts the
KAT500 still searched for a tune.As I indicated when connected direct the K3
ATU finds a reasonable match at the any power level from 2 to 100
watts.Regardless, it still points to the antenna as the problem. Will chec
Up until last week, my KAT500 has run lawlessly. However, it now has a problem
tuning my 160M dipole for no obvious reason. Symptoms are continuous searching
for a match. If it finds a match in tune mode, as soon as you hit the key, it
begins tuning again in "Auto" mode or faults in "MAN" mode
As follow up to my earlier post, my issue of the VFO A frequency not tracking
properly was due to my CONFIG: CW WGHT setting being wrong. I somehow set the
VFO offset from 'VFO NOR' to 'VFO OFS' which results in the frequency offset
equal to the CW tone/pitch selected.
A big thank you to Mike K6
My K3 recently developed a bit of a glitch. While using HRD Logbooks DX
Cluster, when clicking on a station, the K3 will change frequency to that
station, however it will always be 0.75 off. For example if the posted
frequency is 7.017.00 the VFO A will show 7.016.25. A second double click on
Some may recall I had a issue with my KAT500 not connecting to the computer
therefore not allowing me to use the KAT Utility. After checking com ports and
ever purchasing a new KXUSB cable from Elecraft, I sent the unit off to the
mother ship for a look-see. Turns out we lost transistors Q1 and
I am having an issue with linking VFO A and B. Page 6 of the K3 owners manual
(Revision D10) suggests that holding the 'SUB' will link the VFO's , and
holding it more than 2 seconds "engages diversity mode." I never seem to get
the linked VFO's. Holding the 'SUB' button any length of time e
As an up date, I ordered a new KXUSB cable but the computer still does not
recognize the KAT500. The original 'COM PORT' that was used prior to all this
issue is gone and I am unable to find it. I have managed to work through all
the steps from uninstalling and reinstalling the program and utili
After some help hints from Dick (K6KR), Gary and the on-line trouble shoot
guide; we were able to trace to issue down to a faulty DB9/KXUSB cable. We have
ordered a new cable and will pass along any other learning that may occur
concerning this issue.Thanks to all.73, Bill - W0BBI
_
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: htt
I discover a problem with my KAT500 in that the Utility shows that no Software
is loaded. It still received signals from the computer as I can control it from
HRD but I cannot make changes via the Utility. The cable Interface Cable shows
only "flashing red" light. To this point I have confirmed
My order arrived today and after reviewing the materials, installation took
less than 30 minutes.Installed the Beta firmware and as usual it worked
flawlessly.Thanks again to all the folks at Elecraft.Bill - W0BBI
__
Elecraft mailing lis
Just wondering if anyone received their P3TXMON as yet.Bill-W0BBI
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list host
Wanted to check with the group to see if anyone else has had a similar
situation where they hear a "crackling" nose in the the background when
recording a voice message using the KDVR3. I only recently started to use the
module for voice recording and noticed the noise immediately.
Key points t
I would like to propose a New Years resolution to all my fellow Elecraft
reflector users, that being that we all to try limit posted topics to Elecraft
product related issues. While I know we all appreciate the diversity of
perspectives we have here and even the need at times to vent on certain
Problem solved. Apparently a "switch" in a subprogram external to the K3
caused the problem. Thanks to all Bill - W0BBI
I have run into a "Configuration" problem with my K3. I usually have settings
under the 'CW WGHT' (Owner's manual pg. 55) set to run 'SSB+CW' (Tap 1), 'NEW
QSK' (Tap 3)
I have run into a "Configuration" problem with my K3. I usually have settings
under the 'CW WGHT' (Owner's manual pg. 55) set to run 'SSB+CW' (Tap 1), 'NEW
QSK' (Tap 3) and 'AUTO OFF' for VOX (Tap 4). For some reason the K3 reverted
back to the opposite settings and no matter how many times I t
This maybe a bit off topic but I recently discover, by accident, that my K3
been picking up noise from my computer monitor which can be seen on the P3-VGA
as a 1-2 S unit uptick in background noise on 40 - 80 meters. Turn the monitor
off and it drops. The monitor is a Samsung unit and is the onl
How do you set up "topics" you want to receive messages on?
When I go to try and set up"Which topic categories would you like to subscribe
to?" I see nothing that lets me select the topics.
Please advise.
Thanks,
Bill - W0BBI
__
Elecr
33 matches
Mail list logo