Listen up! Where can you get a deal like the K2? Wayne and Eric have to
make a living too and the increase should have been more considering the
time period in which general price increases have foisted on us.
Consider the quality and performance and measure the K2 against what else is
out th
about to resolve my issues to which I appreciate.
Dwight W4IJY K2 #4766
-Original Message-
From: Don Wilhelm [mailto:[EMAIL PROTECTED]
Sent: Monday, August 21, 2006 10:32 PM
To: C Dwight Baker
Subject: RE: [Elecraft] Alignment & Test II
Dwight,
The real problem is that U1 pin 1 is
r time for leading this BOOF (burnt out old f-rt) through
the dark.
Thanks again,
Dwight W4IJY K2 4766
-Original Message-
From: Don Wilhelm [mailto:[EMAIL PROTECTED]
Sent: Monday, August 21, 2006 9:17 AM
To: C Dwight Baker; elecraft@mailman.qth.net
Subject: RE: [Elecraft] Alignment
I am back on s/n 4766 after health issues and traveling.
I am at the Alignment and Test II phase. I have the kit frequency counter
plugged into P6 and TP1.
I go to Cal FCTR for the 4 MHz Oscillator calibration and getting 12104.49
kHz and confirmed with another frequency counter and seem t
I am building K2 #4766 slow and easy. I am putting all the Unmodules as I
go. The Unmodules' instructions leave little chance for error and look very
professional on the RF board.
The quality of the boards, parts and instructions is outstanding!! I
suggest all builders install the Unmodules
Gentlemen,
I apologize for making the statement that the thread on CW be stopped. I am
in violation of Rule 5 and my intent was only to suggest that I was
interested in the technical subjects.
Again accept my sincere apologies.
73,
Dwight W4IJY
___
Gentlemen:
I am forced to sound off regarding all emails lamenting the prospect of CW
not being required to pass the General and/or Extra Class exams; use of CW
during emergencies and so.
But beating a dead horse isn't going to accomplish much. So be innovative
and come up with better syst
I have started 4766 and having a ball. I am a newcomer to Elecraft and old,
old ham since 1959 and dumb enough to let my ticket expire in the 80s'. I
have taken measurements as outlined in the assembly instructions and did not
get a reading in accordance with the resistances shown in the instruct
8 matches
Mail list logo