Andy,
yes indeed I had a closer look and it seems that the left pin on P68A is by
factory. I compared pictures of the pa board at google and there it is the same
depend on board revision.
73's Erwin/DK5EW
Member of the Team of MMMonVHF
your premium VHF.DX resource in the internet can be
I have found now the circuit at the elecraft ftp server.
Found out also that there is a brocken pin at the PA board at jumper at P68A
male connector. This brocken pin still remains in the according female
connector. So lots of problems.
73's Erwin/DK5EW
Erwin Witt - DK5EW schri
Does anybody has the circuit diagram of the KP3A module ? I have board revision
C.
Thank you !
73's Erwin/DK5EW
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfa
OK it was the backside fuse I pulled it in now.
When turning now the power knob K3 is switching off, voltage on ps is going
down and K3 PA unit is getting quick vry hot.
Next is I disable pa unit.
73's Erwin/DK5EW
Member of the Team of MMMonVHF
your premium VHF.DX resource in the interne
Hi all,
one more question pse:
I have seen in the display once a message when turning power knob named "chk
breaker"
Not sure if message name is correct it comes only ones and seldom.
Any idea on that ?
73
Thanks guys,
I will check that all again and contact elecraft as well.
happy eastern to you all and take care.
73s Erwin/DK5EW
William Hammond schrieb am 12.04.2020 20:15 (GMT +02:00):
> Hi Erwin,
> Some plenary troubleshooting might include making sure your power cables
> and
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: ht
Hi Dick,
yes it is as I wrote: the setting in PA below line KPA3 is on "nor"
3's Erwin/DK5EW
RIchard Williams schrieb am 12.04.2020 18:57 (GMT +02:00):
>
>
> Erwin,
>
>
> In Config hold MENU in for about three seconds. Then use the B VFO knob
> and go
"nor".
Any help on that ?
73's Erwin/DK5EW
PS: now Text email not html hope it arrives
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elec
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: ht
SRI I always send as html will give blank email.
Will rock more than a few worlds ? OK I hope it will have 4m as well .
Erwin/DK5EW
73's Erwin/DK5EW
Member of the Team of MMMonVHF
your premium VHF.DX resource in the internet can be found at:
http://www.MMMonVHF.de
Personal Homepage:
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: ht
I updated firmware to latest
one but had no problem last days when operating.
Any help on that ?
73's Erwin/DK5EW
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: ht
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: ht
?
*
Would be nice to have such a solution.
*
73's Erwin/DK5EW
Am 31.07.2013 20:54, schrieb hb9...@bluewin.ch:
Hi Erwin,
I own an "old" K3 (#1212) and a FCDP+ too.
Without a PR-6 (or an other low noise preamp)
i admit that the
FCDP+ is better on 6m, speaking of sensitivity
Hi Olli,
right I will do so !
73's Erwin/DK5EW
Am 31.07.2013 18:56, schrieb Oliver Dröse:
Hi Erwin,
second that. I use the Extra-6 by HA8ET for the K3 and you already
have an Extra-2 so you know their quality. ;-) Besides this it is way
cheaper than the PR6 by Elecraft. ;-)
73,
e the K3 hearing better on 6m ?
--
best regards
Erwin/DK5EW
http://www.MMMonVHF.de - The leading VHF - DX Portal
News - Reviews - QSL Informations - Database - Propagation
We do spread weekly VHF-DX-Newsletter
www.mmmonvhf.de/nletter/newslette
TNX all for private messages.
I got the hint to bypass the tuner. Then the real SWR is shown .
73's Erwin/DK5EW
http://www.dk5ew.de
Am 22.04.2012 15:35, schrieb DK5EW:
> Hi all,
> I used my K3 only with transverter on 2m. Now the 6m season is starting
> and I connected it to my 6m
So it must be a failure in the K3 ?
Yes I have a tuner build in BUT thought SWR must be perfect without tuning ?
Or is it necessary to use tuner if build in ? When I tune SWR is 1:1.1
Please further info if possible.
--
best regards
E
That looks nice and costs only 50 Euro. Technical data's are ok.
Seems to be worth for a test.
The next higher version is also nice:
http://www.monacor.de/produkte/buehnen-und-dj-equipment/produktauflistung/produktdetailseite/?artikelid=133
73's Erwin/DK5EW
Am 18.02.2012 14:00, schrieb
TNX all for answering !
So I understand I have to use 2.7KHz for TX and all others for RX only.
Switching RX filters on XFIL between 2.1 and 2.7 KHz
best regards
Erwin/DK5EW
http://www.dk5ew.de
-
eMail ist virenfrei.
Von AVG überprüft - www.avg.de
Version: 10.0.1424 / Virendatenbank: 2112
?
Thanks for reading !
--
best regards
Erwin/DK5EW
-
eMail ist virenfrei.
Von AVG überprüft - www.avg.de
Version: 10.0.1424 / Virendatenbank: 2112/4810 - Ausgabedatum: 14.02.2012
__
Elecraft mailing list
Home: http://mailman.qth.net
Hi all,
I guess many of you use the K3 as well portable. As I have only a /p QTH
where I use my K3 I'm looking for a nice transport box or suitcase with
K3 fitted foam or foamed material.
I'm interested what kind of transport box you use ?
best regards
Erwin/DK5EW
-
eMail ist
Hi all,
I did manage it now by reducing mic and comp so its fine now.
All settings was to much with 25 - now it is 10/15 with the HEIL.
Thanks for fast answer - a good reflector !
I like it !;-)
73's Erwin/DK5EW
Am 23.09.2011 12:39, schrieb DK5EW:
> Hi all,
> I use at my K3 a HEIL PR
Dear Buck,
thanks for your tips but I'm not sure if I have to do any mor because my
K3 is brand new !
It came 05.September 2011 and has serial 5776.
73's Erwin/DK5EW
Am 23.09.2011 13:24, schrieb Buck k4ia:
> It is not a fan, it is RF or other noise getting back into the mic
> cir
rophone is that sensitive to pick up all
little noises around.
best regards Erwin/DK5EW
-
eMail ist virenfrei.
Von AVG überprüft - www.avg.de
Version: 10.0.1410 / Virendatenbank: 1520/3913 - Ausgabedatum: 22.09.2011
__
Elecraft ma
cked all I could in the config menu but did not any fault setting.
Any help on this strange problem ?
best regards Erwin/DK5EW
-
eMail ist virenfrei.
Von AVG überprüft - www.avg.de
Version: 10.0.1410 / Virendatenbank: 1520/3912 - A
Hi all,
is the a possibility to read out the K3 settings and save it as a macro ?
best regards Erwin/DK5EW
--
best regards
Erwin/DK5EW
-
eMail ist virenfrei.
Von AVG überprüft - www.avg.de
Version: 10.0.1410 / Virendatenbank: 1520/3910 - Ausgabedatum: 21.09.2011
TNX all for advice. !
I tried via RS232/USB FTDI but that caused problems with WSJT. As I want
to use also CAT I decided to go via 15pol ACC and PC's com 1.
Now I made that simple npn transistor solution and that works fine now.
73's Erwin/DK5EW
http://www.dk5ew.de
Am 20.09.2011 19:1
the K3 goes on TX.
Any solution out there ?
--
best regards
Erwin/DK5EW
-
eMail ist virenfrei.
Von AVG überprüft - www.avg.de
Version: 10.0.1410 / Virendatenbank: 1520/3907 - Ausgabedatum: 19.09.2011
__
Elecraft mailing list
Home
Hi all,
does anybody use the virtual com port driver by FTDI ?
I found this on the FTDI homepage: http://www.ftdichip.com/Drivers/VCP.htm
How do I have to use it ? I need to set up different com ports for
running wsjt software for PPT port and cat for logging ec..
73's Erwin/
TNX for the max. 5V information.
I can manage that.
best regards
Erwin/DK5EW
MMMonVHF - Beacon manager
Meteorscatter contest manager
http://www.MMMonVHF.de - The leading VHF - DX Portal
News - Reviews - QSL Informations - Database - Propagation
We do spread weekly VHF-DX-Newsletter
pin 7.
I understand I have to set CONFIG: TX INH to high. But can I use 13VDC
to that pin 7 or better
what's the maximum voltage can be there at pin 7?
--
best regards
Erwin/DK5EW
-
eMail ist virenfrei.
Von AVG überprüft - www.avg.de
Version: 10.0.1392 / Virendatenbank: 1520/3885
kepek/me2t_protransverterspec.htm
Later I plan to add the subrx unit and the DSP Panadapter
best regards
Erwin/DK5EW
http://www.dk5ew.de
Am 29.08.2011 19:01, schrieb Eugene Balinski:
> Please do list your final configuration so others may
> learn.
>
> 73 and thanks,
>
> Gene K1
Hello all,
I received mni emails what best is to buy for my case. Now I have the
overview.
THANK YOU ALL VERY MUCH ! THIS IS A VERY NICE AND ACTIVE REFLECTOR !
I plan to order 30.09.2011
I really look forward being a proud owner of a K3.
--
best regards
Erwin/DK5EW
MMMonVHF - Beacon manager
I wish to operate in
2m digital modes EME/MS and using it for contest on2m.
So any help is welcome.
--
best regards
Erwin/DK5EW
MMMonVHF - Beacon manager
Meteorscatter contest manager
http://www.MMMonVHF.de - The leading VHF - DX Portal
News - Reviews - QSL Informations - Database - P
37 matches
Mail list logo