When I ordered the SYN board, I was told "some time around the end of Sept"
- from Support, not Maddie.
Well, at least now I can feel like I ordered a K4 cuz I'm waiting too.
de Doug KR2Q
__
Elecraft mailing list
Home: http://mailman.qth
I had the strangest thing happenyesterday (K3, 1st prod run).
All of a sudden, I lost all audio output (headphones). I pull the
headphones, but same thing on the internal spkr. Radio was tuning,
receiving (per P3) and transmitting, but zero AF output.
After 15 seconds of wonder, I turned the K
Just checked out your QTH. You have LOTS of room for more efficient
antennas than that baby loop...for way less too.
Hey...you could even put a vertical on your truck and use that (nice
truck!). They can't get you for an antenna on your vehicle.
You have trees, you have gutters, you have b
Thanks guys.
de Doug KR2Q
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help su
*K3/10 for sale*
This is a nearly stock original K3 -10 watt version- with just one extra
installed.
100 percent working. No dings, no scratches, no upgrades, no failures.
Includes Elecraft original box.
I am the original owner - Doug, KR2Q. SN 822. Always non-smoking, indoor
heated and Air
Just FYI...
http://mailman.qth.net/pipermail/elecraft/2008-March/084937.html
de Doug KR2Q
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailma
Is it like the K3 where you can adjust it in 1 watt steps down to (say) 10
watts and then it adjusts in 0.1 watt steps?
de Doug KR2Q
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.
Thanks Alan and all of the others who replied privately! Great response in
no time flat.
de Doug KR2Q
On Fri, Dec 18, 2020 at 11:51 PM Alan Bloom wrote:
> 480 x 272
>
> On 12/18/2020 6:56 PM, Douglas Zwiebel wrote:
> > Anyone know what the screen resolution is?
> >
> &
Anyone know what the screen resolution is?
Thanks
de Doug KR2Q
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted
I just swap VFO A/B so the "VFO B" frequence show "on top" (one quick press
of the A/B button).
Then, I give a long press on the RATE button (says "LOCK" below the word
RATE). Then I do A/B swap again. Now I can tune VFO but VFO B is locked.
No?
de Doug KR2Q
___
In N1MM+
Go to Configurer
Select WINKEY tab
Change value in the Keying Compensation window to 6
Magic
de Doug KR2Q
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
http://www.cqdx.ru/ham/new-equipment/kenwood-st-995sdr/
de Doug KR2Q
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list h
1. Nice job by 2RF.
2. Instant reply calling his approach smoke signals
3. 2RF sez "nope"
4. Elecraft effectively sez: 2RF post is NOT fake news and cites some
possible issues. Good for Elecraft (as usual). Vetting on a pre-reflector
posting basis is a GREAT idea. We are all anxious to "hea
Thanks to TV for doing these.
I really think that while well intentioned, these recordings are "not much"
in terms of comparing the two radios (or even just the K4 alone), unless
you're an operator who is concerned about exactly the conditions
(parameters) which are being used for the recordings.
Try these too:
https://ccm.net/faq/43906-turn-off-system-sounds-in-windows-10
https://www.simplehelp.net/2018/03/19/how-to-disable-the-windows-10-system-sounds/
I also have a Signal Link, a K3 and Win10 and that is what I did (turned
off system sounds).
de Doug KR2Q
I was caught off guard by Wayne's post. What was he trying to say?
Was he trying to say why the K3 is going away and now we have the K4's?
Maybe. It's prettier and more likely to attract the younger crowd based on
looks? Could be, but that price? Nope.
I got interested in ham radio when a fri
https://www.forbes.com/sites/gordonkelly/2019/10/03/microsoft-windows-10-warning-printer-updates-upgrade-windows-10/
Enjoy
de Doug KR2Q
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.
Jim, K9YC sed:
[snip]
I wouldn't put too much credence in a sort like this -- ratings like
this are highly subjective
[end snip]
Which is exactly why I limited the list to 100 or more reviews. I figure
that folks who buy, or might buy, a K3 or K2 (or any other rig), are
probably as "subjective"
Hope this prints OK.
While doodling around today, I thought to take a look at the eHam.net
product reviews.
Somewhat difficult to make a lot of sense from it, so I thought I'd import
it into Excel.
I've limited the list below to those rigs with 100 or more reviews. The
sort is by average rating
Hi,
I'm in Randolph, NJ (Morris Co) and wonder if there are any KX3 owners who
would be willing to allow me to stop by and see your KX3 "hands on."
thanks
de Doug KR2Q
my email address is good at qrz.com
__
Elecraft mailing list
Home: h
Wayne said
- a built-in carrier-operated relay (I've transmitted at 10 watts into
the KX3 without damaging it)
Which begs the question (at least for me). Was this intentional or an "ooops?"
:-)
de Doug KR2Q
__
Elecraft mailing list
Hom
I'd never use it, but if it can be added and menu selectable (on/off),
what the heck...no skin off my back.
What I do, if want to make a big frequency excursion on the same
band/mode is simply use the "keypad" to enter the frequency in the
range I want to target. But honestly, since I mostly use
RE: memo below.
Excuse me, but there were (are?) lots of "no tune" rigs that use
tubes. I used one (an Alpha 78) over 25 years ago. Of course, since
then, I've been a QRPer, so moot point for me.
de Doug KR2Q
>Yes, it *has* to be solid state. It would be complete insanity for Elecraft
Agreed
Gosh...so many guys in various "markets" want access to a remote station!
Wonder if I could sell access time? I have a pretty nice station
setup in NJ and I'm only QRV during some contests (just the "big"
ones).
Otherwise, the rigs/station sits idle.
When I was in H.S. (don't ask), we used to p
IMHO, there are few folks in the contest world that are better
technically than Bill (W4ZV), so I would suggest that everyone take
his comments very seriously.
Bill...I do have a question or two, with respect to your statement below.
1. Just how often do you find that you run into a situation su
I've received emails replies (direct and otherwise) that, for me, indicate
that I should elaborate/clarify what I am referring to.
Let's assume that you have a 2.7 and 2.1 roofing filter.
If you set up your "narrower" SSB filter according the the manual, which is
what the majority of K3 ops do, a
I would like to change one word in the following paragraph. In the
last sentence, "If the SSB band..." change the word " If " to " Unless
"
Sorry about that.
de Doug KR2Q
I have to wonder out loud how many guys are "feeling" the DSP filter
width impact when they go from their 2.7 to 2.1 to 1.8
My 2 cents:
For "rag chewing" the stock "wide" filter is fine.
In fact, I still use the stock SSB filter in both of my K3s and I am a
pretty serious contester (nobody holds more current CQWW USA contest
records than I do).
Remember that a roofing filter is NOT what determines your "final IF
band
Let me start off by stating that I own a K2, a pair of K3's and a P3.
I also own an FT817.
1. Yes, the KX3 is "way better" in terms of rx specs and some options
2. The FT817 ain't bad either, especially factoring in price (well, my
price)
These are really two very different radios.
Personall
Don't look now, but the order page
http://www.elecraft.com/elecraft_prod_list.htm link for the KPA500
now brings you to the KX3 info section.
I know you guys want to push the KX3, but I'm sure you'd be happy to
maintain some KPA500 sales too. :-)
The KX3 and K3 links still work correctly.
Just
That tells you "in what direction" your other VFO is set to...and that is
is "off scale" for what you currently have displayed.
To prove it to yourself, push the A>B button so that both VFO's are on the
same frequency. The arrow should "go away." Now turn the knob on VFO B
until the marker goes
Please explain why someone would want to use a P3 with a "trail radio,"
which runs off of batteries? Doesn't dragging a P3 along sort of defeat
the idea of ultra-portability for operation from "the field?"
Help me to better understand.
Thanks,
de Doug KR2Q
___
I trust that the K4 will have the same form factor as this display and
that the K4 VFO knob will be the same diameter as base of the stand
for the monitor. Ought to make a lot of guys happy.
But personally, I like the size of the P3, thanks. ;-)
de Doug KR2Q
http://lists.contesting.com/pipermail/cq-contest/2011-November/096331.html
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This l
http://lists.contesting.com/pipermail/cq-contest/2011-November/096331.html
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This l
I recently upgraded my first run K3 and SN 822. 822 was fine, but
with #295, I had the same thing as you describe..several times. I
sure did not tighten them "that much" when I put it together!
Besides what Bill has contributed to your issue, I had to leave the 2D
in place and manage to remove a
-- Forwarded message --
From: DOUGLAS ZWIEBEL
Date: Mon, Oct 31, 2011 at 12:33 PM
Subject: K3 DKV "silly question"
To: Elecraft Reflector
the newer versions of N1MM do not "work" with the ESC key.
remap one of the unused F keys (say F12), like this
the newer versions of N1MM do not "work" with the ESC key.
remap one of the unused F keys (say F12), like this
F12 ESC, {CAT1ASC RX;}
this forces the K3 into receive. I used it over the weekend..works great
(until I lost power at 2220z Saturday...still no power...I'm currently
living in a motel
No, not physical dimensions, but RX specs.
You show us what the 817 looks like here (in the big table...just
scroll down a little to see the table and then to near the bottom for
the 817): http://www.elecraft.com/K2_perf.htm
I know the KX3 isn't "finalized" but it must be pretty close...it's
alm
For those of us unlucky enough to have many runs of coax, each of
considerable length, often going through switch boxes,
having a TDR would be heaven in helping search out "issues" on the line.
Seems like a stretch to make a P3 into a TDR, but hey, I work in
healthcare, not ee, so what do I know?
Surprised to see Wayne say that the KX3 is "smaller" than the FT817 (I
own the latter).
So I got out my ruler.
H.
Looking at the photos of the KX3 and then reading the stated
dimensions: 3.4 x 7.4 x 1.7 - I have to wonder if those are the
dimensions of "the box," but no counting any knobs
I have just ordered a P3 to go with my first run K3 (sn < 300).
I am wondering if the P3 "comes with" the K3 I/O Output Buffer Mod Kit
for the K3 to enhance the IF output from the K3 (a single resistor
that goes inside the K3)?
I have asked several guys a know, but the common answer so far is, "I
Hi...
I am a fossil using CT on DOS. I am now upgrading and am wondering
about using the N1MM "DVK" option versus or in conjunction with the
K3DVK (which I do not yet own).
I suggest that you reply off-reflector; that is, directly to me, but
clearly, "your choice."
1. If you utilize the "DVK"
I have noted on the P3 panadapter page from Elecraft, that one of the
"features" or uses is cited as
http://www.elecraft.com/P3/p3.htm (bullet #11)
Buffered IF output to drive other equipment (CW Skimmer etc.)
Can anyone describe for me just how this is specifically accomplished for
use with Ski
Wow...I can't believe the numbers of responses I received with so many
really great suggestion!
What a GREAT group!
Thanks to everyone who replied!!
de Doug KR2Q
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
Hi everyone,
1. Please reply off-list
2. I want to teach my daughter how to solder leaded components onto a
circuit board (to start).
3. Where can I get a cheap (really cheap?) source of boards to play on.
Obviously, they do not need to work, can be broken, etc.
Thanks,
Doug KR2Q
___
What is being described does not sound like the "classic" definition of an
LDE.
Google it and you find that many define LDE as a delay of at least 2 seconds
(not milliseconds). Millisecond delays sounds, to me, like hearing your own
Long Path signal or something else not well definedbut not L
I have no affiliation with INRAD, but I have purchased from them before (on
Jan 1, of course).
ONE DAY ONLY (Jan 1, W6 time)
http://www.inrad.net/inrad.php?mode=announce
Enjoy!
de Doug KR2Q
__
Elecraft mailing list
Home: http://mailman
http://www.thp.co.jp/english/hl_100bdx_e.html
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl
Someone said they weren't aware of any amps that do 5 in 100 out. How
about 10 in and 400 out?
No, not FCC type accepted, but it's available. I'm sure there are others.
http://www.thp.co.jp/english/hl_700b_e.html
de Doug KR2Q
__
Elecra
Almost 30 years ago now, before I was 99.% a QRPer, I had an Alpha
76CA (3 tubes). It had a giant swamping pad on the input (I still
have it - the swamping pad, that is). Just take it out and like
magic, you could drive the amp with QRP. My intention was never to
exceed legal limit, just to
If this is a duplicate listing...sorry.
I really don't care about an "audio" comparison on just one signal on
a quiet band, but wow...look at the size difference!
I guess guys like driving an 18 wheeler, but I'll stick with the K3
any day of the week. YMMV
http://www.youtube.com/watch?v=WKwJ8Cu
I have to object to the course that this thread instantly turned to.
K2QI's very reasonable post reads (edited)
[snip]
Quoting Wayne: "The KIO3's digital I/O module could be replaced with
one that has USB rather than RS232 -- or better yet, both. We planned
for this."
Quoting K2QI
"Just wanted t
>From the N2CQ posting
CQ World Wide DX Contest (CW) ... QRP Category!
Nov 27, z to Nov 28, 2359z
Rules: http://www.cqww.com/rules/CQWW-Rules-2010.pdf
Please keep in mind that there are LOTS of QRP categories now (with
certificate recognition)...
QRP Assisted all band
QRP Assisted, monob
For the CQWW CW contest, there are now 2 QRP categories...
One as usual and a new one for QRP-assisted (those using spotting networks
such as packet or DX cluster)you now have increased opportunity to win
an award!
de Doug KR2Q
CQWW Contest Committee
__
For the CQWW CW contest, there are now 2 QRP categories...
One as usual and a new one for QRP-assisted (those using spotting
networks such as packet or DX cluster)you now have increased
opportunity to win an award!
de Doug KR2Q
CQWW Contest Committee
__
Don said:
but in these days of transceivers, I think we have lost that ability
KR2Q sez:
Not if they bother to use the CWT tool ! :-)
The huge problem with the K3 isyou have to actually know how to
use the great tools it affords you with (in case you can't tell, that
is sarcasm).
I always u
I really thought that someone else would have picked up on this, but
since I haven't seen it yet, here goes.
One post indicated that moving from 50 to 100 watts was "doesn't
matter" but that going from 500 to 1kw, well, "OK."
Hey, both are 3db and the relative change in power for either will be
i
I agree with the comment about Iambic A vs B option. I really
couldn't stand the keyer (at first) until I swapped from A to B (or
was it from B to A?). Now, smooth as silk and nothing is every
missed. Of course, that was years ago now (one of my K3s is first
run).
For those of you who don't kno
http://www.youtube.com/watch?v=kNeUxt72m5s
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.ne
http://www.youtube.com/watch?v=yXuzrIN_x2M
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.ne
Far too many posts, most of which add little beyond opinion.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by:
Amazing.
http://www.youtube.com/watch?v=9tIZUhu21sQ
I have nothing to do with product...just amazed and thought I would share.
de Doug KR2Q
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mai
What a pessimist. Maybe the price change will result in a lowering of
prices. After the initial rush of "gotta have it," remember
elasticity of demand!
de Doug KR2Q
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
I don't have fat fingers, so no comment on that.
But the best way to "know for sure" is to try one out. I'm sure there is a
K3 somewhere within easy driving distance from you. Just ask around (here)!
de Doug KR2Q
__
Elecraft mailing li
1. When I was a kid (a long time ago), TenTec was known as the CW
man's radio.
2. As tubes faded away, the lament often heard was "real radios glow
in the dark."
Well, check out tentec.com
1. They now say, "The SSB Company"
2. You won't believe their approach to "glow in the dark" radi
>From one contester to another
It is my experience that it takes more "set up" to get your transmitted
audio to sound more like the Kenwood of old (nothing ever came close to the
Signal/One transmitted audio).
I got on a "dead" band with a local who has known me for decades and we
played with
Also see
http://mailman.qth.net/pipermail/elecraft/2008-August/094789.html
I'm sure the price has changed. :-)
de Doug KR2Q
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.ne
Yes...a very L O N G time ago. :-)
http://mailman.qth.net/pipermail/elecraft/2008-August/094777.html
I also some other input that you may be interested in, but it is an
attachment, so I'll send it to you directly.
de Doug KR2Q
__
El
It is really not fair to compare oneself to Bill (W4ZV). He is really
good at, well, everything.
I sent him a geography quiz once, and he blew it away. Then there was
the "how much audio delta can you discern" and I think he had some
crazy results, like 4hz. Not to mention the first Novice Clas
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: htt
Other than the price, have there been any changes to the KPA3 module
(and associated parts/fans) since it was first introduced?
de Doug KR2Q
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mail
Wayne and Eric
I'd like to send in my deposits NOW so I can then have the right to
complain about how long delivery is taking.
Where do I send my check?
de Doug KR2Q
tongue firmly in cheek
__
Elecraft mailing list
Home: http://mailm
Actions speak louder than words. Not bad for the "new kid" on the block
Here are the results (and rigs) for the just completed World Radio
Team Championship help in Russia (concurrent with IARU contest). Talk
about popular!
http://www.wrtc2010.ru/?id=75
de Doug KR2Q
___
The top banner of the ad reads:
"Still using that K3? You may just want to stick it on e-bay"
That is what I found to be rather provocative (lots of
"brass")both in actually citing the model number of their "target"
and THEN saying to put it up for sale.
I feel that "provocative" is the cor
Thanks to Lew K6LMP for posting this. Once you get there, double
click the icon.
http://public.me.com/lewphelps
de Doug KR2Q
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/m
I have this link set up so anyone with the link can view it, but it is
apparently NOT working that waysorry.
Anyone have a space to host this small pdf file? I email it to you.
Doug KR2Q
__
Elecraft mailing list
Home: http://mailman
https://docs.google.com/fileview?id=0Bw6A6YLa6L3rZjhjNWRiMGUtODZiMi00OWM3LTljYmItNWM3ODY2YWU0YjVi&hl=en&authkey=CLe25YAE
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
http://hraunfoss.fcc.gov/edocs_public/attachmatch/DA-10-365A1.pdf
The Federal Communications Commission is accepting comments through
April 2 on an AHA request for a blanket waiver to permit hospitals
seeking accreditation from The Joint Commission to use amateur radio
operators who are hospital e
OK...I have not shared any ideas...until now. I want this! No, this
is not a joke, so please review.
Just imagine the possibilities!
http://www.youtube.com/watch?v=67Gl1DnMVco
http://www.designfax.net/enews/20100202/feature-6.asp
I have no vested interest.
de Doug KR2Q
__
"Is it worth it" can be answered from at least two different approaches:
1. Are you interested in PERFORMANCE and if so, to what degree. Your
answer depends on what type of operating you do. Do you do a lot of
contesting? Are you a serious DXer? Do you work DX on Top Band? Do
you operate esot
check this out. This op clearly is proud of their 160m SSB qrg
operation. With this approach, you can customize any way you like
http://i.ehow.com/images/GlobalPhoto/Articles/4581944/BrownieGirlScout1.07-main_Full.jpg
tic
de Doug KR2Q
___
Lyle said:
"...Most people do not notice..."
Maybe most people simply don't complain? I have lots of friends with
K3s (I mean LOTS) and I am not aware of even one who does NOT notice
the delay. Of course, all my friends are contesters, so maybe we are
a "picky" group. :-)
I found it better to
After all of the discussion on here about "WHY" some guys might
perceive "noise" where others do not, why are 'phones with these specs
even being considered for a K3 (unless your own hearing cuts off at
4kc).
Frequency Range
20 Hz - 20 kHz
Microphone Type
Dynamic
Mic Frequency Response
I asked this a long time ago.
Check this out (one of MANY replies I got).
http://mailman.qth.net/pipermail/elecraft/2008-August/094783.html
Keep in mind the buffering which may be required.
de Doug KR2Q
__
Elecraft mailing list
Home: h
http://www.winzip.com/lanall.htm?ext=GZ
http://www.gzip.org/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by
Excuse me, but are all of you guys listening to NOISE ONLY? I
mean...noise WITHOUT a signal? What good is that? Sorry, but I never
listen to noise on purpose.
I cannot see any practical value in such a "test."
de Doug KR2Q
__
Elecraft
One of the posts that I found confusing and prompted a reply from me
was from Eric:
http://mailman.qth.net/pipermail/elecraft/2009-December/122284.html
Specifically, the 2nd sentence.
BUT NOW I've finally put it all together (Okay, maybe I'm a bit slow).
If you are also
OK...so besides the LPF, what else is different on the DSP "D" board?
I don't think I've seen any elaboration anywhere.
thanks,
de Doug KR2Q
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mail
RE: Audio Peak Filter requests
A number of folks have asked for this, including some who have not
commented here. Many of these guys obviously used a "audio peak
filter" before, found it useful, and now miss it.
As before, I have no issues with any requests, as long as they are
user-selectable a
I have to admit, I just have not experienced any of these "issues"
with either of my K3s. Yes, I am mostly a CW guy and yes, I use
headphones.
So...lacking any "real" test equipment (I assume that if the test
equipment between my ears can't discern it, then who cares what a
meter or scope shows m
K2MK said,
I would like to see the keyer speed adjustment changed so that it takes 2
encoder pulses for each WPM increase or decrease. When you are keying with
your right hand and want to change your speed by 1 WPM it takes a bit of
mental skill to simultaneously use your left hand to turn the knob
That's right, there an award for the top score by an entrant running
an Elecraft K2! Here is your chance to compete with your fellow
K2-ers. It's the Stew Perry Top Band DX Challenge (affectionately
called, "the Stew").
See the awards here
http://www.jzap.com/k7rat/plaques.txt
See the rules her
Try this
Instead of reading, just ALWAYS press the button in the upper
right-hand-most corner. Nothing to remember other than "use the
corner button."
Of course if you want to overwrite the memory, NOTHING will happen
when you use the "corner" button and then can say, "OH, use the other
one.
Only one:
A public link for "known issues log" (read only) with columns for
"name and description of issue," entry date, priority, begin
resolution date, dated comments by the Elecraft team on progress,
resolved date, and once resolved, an explanation of what was done.
And maybe a method where us
Yes, a well known issue for a LONG time...with a SUPER EASY solution.
It is indeed due to the internal speaker.
A year or so ago, I got a call from a local (a couple miles away) that
he had a "spurious" on his K3 (I helped him build it). I listened,
yes it was there. When he switched from the i
I have been posting a LOT of private messages since I don't think they
add much (anything) to general knowledge on the reflector. But this
time, I think this has some merit for those who are still "thinking
about" a K3, factory-assembled versus DIY (kit).
So the recent question raised (not by me)
I used my K3/10 during the 10m contest and, along with most others,
experienced these "strange" conditionsvery cool during the
contestand now, a possible/probable scientific explanation. I actually
worked the author (N7DF). You had to be there!
http://lists.contesting.com/pipermail/cq-co
Hehehehe.
Here is MY approach.
I subscribe in digest form and DELETE every digest w/o looking at
anything, as soon as it arrives. I subscribe so I can reply. Other
reflectors have a "set no mail" option, but I didn't see that when I
first subscribed here (years ago).
I simply use the refle
Well, if this can be a user selection fine. But I really like the
"tiny steps" below 12 watts. Please retain that.
Thanks,
de Doug KR2Q
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman
1 - 100 of 545 matches
Mail list logo