Issue has been resolved. After digging deeper into my settings I found that I
had somehow turned the bias on. Upon turning this off and setting the mic
gain to High I immediately had what appears to be normal ALC indication. I
suspect this happens when you operate mostly CW and data modes...
-
Have a two year old K3, latest firmware installed. I have noticed for some
time that the ALC reading during SSB operations does not sho any bars at
all. My Mic Gain is set to about 20, Compression to 25 and I receive good
audio reports. There is however no ALC indication. Any help woulw be
apprecia
I'm an old ham who has built a lot of kits over the years. I am really
excited though to become an Elecraft user having just received my K3 kit. My
question has to do with instructions to "either brush or blow away any dust
or lint from the front panel area around the encoder shaft".
I have a g
I'm an old ham who has built a lot of kits over the years. I am really
excited though to become an Elecraft user having just received my K3 kit. My
question has to do with instructions to "either brush or blow away any dust
or lint from the front panel area around the encoder shaft".
I have a g
4 matches
Mail list logo