Hi,
I might suspect something else...
Have you done a power off test of your home yet?
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist
ARRL Asst. Director, NW Division, Technical Resources
On 2/18/20 8:29 AM, Andreas Wachter via Elecraft wrote
I have some pages which might help locate your RFI at:
https://www.nk7z.net/i-have-rfi-now-what-locating-it/
Also Jim Brown has a ton of data at:
http://www.audiosystemsgroup.com/publish.htm
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist
ARRL
, at 4:24 AM, Dave Cole <mailto:d...@nk7z.net>> wrote:
Hi Wayne,
Does the "W" suffix apply for all macro commands, or just the KY macro
command?
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist
ARRL Asst. Director, NW Divi
ro.
Wayne
N6KR
elecraft.com <http://elecraft.com>
On Feb 14, 2020, at 10:37 AM, Dave Cole <mailto:d...@nk7z.net>> wrote:
Does anyone know of a macro that will make a beep come out of the K3?
--
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL
power.
elecraft.com <http://elecraft.com>
On Feb 14, 2020, at 7:42 PM, Dave Cole <mailto:d...@nk7z.net>> wrote:
Hi Wayne,
Thank you for the suggestion!!
The software I use to send macros, (MixW), uses "<", and ">" to start
and terminate a macro...
) characters in a KYtext command.
For example:
KYW;
The ‘W’ forces the K3 to complete the message send before moving on to other
commands in the macro.
Wayne
N6KR
elecraft.com
On Feb 14, 2020, at 10:37 AM, Dave Cole wrote:
Does anyone know of a macro that will make a beep come out of
Does anyone know of a macro that will make a beep come out of the K3?
--
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist
ARRL Asst. Director, NW Division, Technical Resources
__
Elecraft
Use DUAL PB, it will shock you at how clear an almost unreadable CW
signal becomes...
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist
ARRL Asst. Director, NW Division, Technical Resources
On 2/11/20 6:05 PM, bw...@fastmail.fm wrote:
Would anyo
.
73
Barry
NF1O
From: elecraft...@groups.io on behalf of Dave
Cole
Sent: Tuesday, February 11, 2020 3:59 PM
To: elecraft@mailman.qth.net ;
elecraft...@groups.io
Subject: [Elecraft-K3] What's your favorite MACRO for the K3 or P3?
It has been a while sinc
It has been a while since I have seen a macro list for the K3, and I am
reprogramming my external Genovation Keypad for the K3,
(https://www.nk7z.net/adding-external-keypad-k3/), and looking for a few
interesting new macros...
If you got em, post em...
--
73, and thanks,
Dave (NK7Z)
https://w
Hi,
I have a K3, and am seeing what looks to be some sort of unknown, and
unexpected AGC action when I have AGC off, on both the K3, and within
Windows.
I am trying to triage this to the radio, the computer, or WSJT-X.
Here are the test conditions:
WSJT-X used as the software for testing.
Perhaps the addition of a thermite infused case for those bad "crypto"
moments...
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist
ARRL Asst. Director, NW Division, Technical Resources
On 2/8/20 4:38 PM, Fred Jensen wrote:
Can't imagine how a K
Hi,
I got bored today, and graphed the input power vs. the output power of
my KPA500 across 160 through 10 meters. I put the results on my web
site at:
https://www.nk7z.net/kpa500-input-vs-output-power/
--
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technic
Hi Rick,
I like your call sign! :)
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist
ARRL Asst. Director, NW Division, Technical Resources
On 2/6/20 1:07 PM, Rick Bates, NK7I wrote:
Since the SWR is still nominal into the amp (as shown on your r
liquid, water and an old toothbrush.
Dry fully before putting them back on the K3.
73,
Don W3FPR
On 1/24/2020 10:01 AM, Dave Cole wrote:
Any suggestions for the best cleaner for the old black screw locked
knobs?
__
Elecraft mailing list
Any suggestions for the best cleaner for the old black screw locked knobs?
--
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist
ARRL Asst. Director, NW Division, Technical Resources
__
Elec
Each visitor gets a free K4! :)
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist
ARRL Asst. Director, NW Division, Technical Resources
On 1/14/20 12:12 AM, Clay Autery wrote:
I've never been to Watsonville... BUT, I'd give my eye teeth to visit
Same here, I have run 2 and 5 watts using WSPR, works great with my K3.
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist
ARRL Asst. Director, NW Division, Technical Resources
On 1/5/20 2:05 PM, Tony Estep wrote:
On Sun, Jan 5, 2020 at 3:55 PM HP
Nerve impulses travel at around 200 MPH, tops, but I believe the
explanation will still hold.
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist
ARRL Asst. Director, NW Division, Technical Resources
On 12/28/19 10:16 PM, K2bew wrote:
Jim I really
I collect NK7 cards... Have three or four now.
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist
ARRL Asst. Director, NW Division, Technical Resources
On 12/24/19 6:33 AM, Carl Yaffey wrote:
I’m pretty sure I’m the ONLY ham who collects cards fr
As an info point relating to age of new hams:
I am on our VE team here in Oregon, we put through several hundred folks
a year, maybe even 500 to 1000. Most people that are new to ham radio
here, are between 25 and 35, with a tilt toward 40... Very narrow range.
73, and thanks,
Dave (NK7Z)
h
Spoken like a true tech! :)
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist
ARRL Asst. Director, NW Division, Technical Resources
On 12/13/19 12:21 PM, hawley, charles j jr wrote:
Generally...whatever you stock in replacement parts will never
That did not take long to fix... :)
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist
ARRL Asst. Director, NW Division, Technical Resources
On 11/28/19 5:49 PM, Dave Cole wrote:
...and you have a lot of dead image files at:
https://elecraft.com
...and you have a lot of dead image files at:
https://elecraft.com/
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist
ARRL Asst. Director, NW Division, Technical Resources
On 11/28/19 1:12 PM, Eric Swartz wrote:
We've activated our Black Friday s
Hi and Welcome:
Your next purchase should now be the Cady books for your hardware... I
believe Elecraft sells them now.
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist
ARRL Asst. Director, NW Division, Technical Resources
On 11/27/19 9:01 AM
Nothing in Eugene, OR, and I have had a SDR recording for the past 15
hours...
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist
ARRL Asst. Director, NW Division, Technical Resources
On 11/21/19 7:24 AM, Dave Sublette wrote:
S9 here in KY
K4TO
separate RX antenna on the SDR (you may still need
protection for the SDR unless the TX antenna is located far enough from
the RX antenna.
73,
Don W3FPR
On 11/18/2019 11:06 AM, Dave Cole wrote:
A few years ago someone posted a method of using a splitter, and the
External Antenna jacks to feed
A few years ago someone posted a method of using a splitter, and the
External Antenna jacks to feed an external SDR with the direct antenna,
not a IF, but a wideband signal from the primary antenna...
I think it was something along the lines of add a splitter, between the
RX Antenna in/out, an
, qr...@roadrunner.com wrote:
I blame the squirrel.
Howard Kraus, K2UD
-
From: "Dave Cole"
To: "elecraft@mailman.qth.net"
Cc:
Sent: Sunday November 17 2019 6:35:12PM
Subject: [Elecraft] Here is an odd one...
We had a power failure, and
We had a power failure, and when the power came back on, my K3 did not
see, nor key my KPA500... It was working fine just prior to the power
fail... We were not home when the power failed...
The battery backup came on line and protected the K3 from the odd power
spike, which I assume happen
That is a funny typo...
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist
ARRL Asst. Director, NW Division, Technical Resources
On 11/12/19 9:33 AM, Jim KO5V wrote:
Testing new email address.
__
I do the same thing every power fail, and I see about a 15 to 20 db drop
in noise as well...
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist
ARRL Asst. Director, NW Division, Technical Resources
On 11/3/19 12:08 AM, Jim Brown wrote:
On 11/2/20
Hi,
I had an occurrence where one of my smaller knobs, (Filter Width),
became erratic in its control of the actual filter width... Skipping,
and not having any effect at all...
I fussed with it a bit, and now it is working... Is this a sign of
imminent failure or is it just a bot of dirt?
I have to say it... Maybe he things you have an Icom? :)
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL Asst. Director, NW Division, Technical Resources
On 8/28/19 9:40 AM, Nate Bargmann wrote:
I received a note this morning advising th
If you are into it, and want to avoid a full fledged keyboard, I have
added an external keypad to my P3, and have 64 macros I can fire at a
single button press...
See:
https://www.nk7z.net/adding-external-keypad-k3/
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Technical Specialist
If that does not work, then you have a serial port issue with Windows...
I am using a "real" serial port.
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL Asst. Director, NW Division, Technical Resources
On 8/13/19 4:49 PM, Ray Albers wrot
I am using "Kenwood", then "All Kenwoods" as the radio, in Mix 3.x.
38.4, 8N2.
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL Asst. Director, NW Division, Technical Resources
On 8/13/19 4:49 PM, Ray Albers wrote:
So after having built a
I am running Ubuntu on two machines, and it is rock solid. My main
machine never has an issue, and always works, and I beat it up daily...
My wife's laptop is the same, no issues in several years of operation.
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Technical Specialist
ARRL Volu
Looks good now!
On 7/16/19 10:56 AM, Gary Tuck via Elecraft wrote:
trying to find secret to posting. I’ve been doing something wrong.
73, Gary W7TEA
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help
I found that there is a terminal block inside most Astron Power
Supplies, that sometimes gets mounted on a painted surface.
I always check all Astron supplies I buy, new or used, to insure the
paint has been removed under the ground connection of the internal
terminal block. In about 50% of t
Gwen,
I too am on Windows 7 for my Amateur Radio software, and see the same
thing, but, I also understand why authors won't support W7 anymore, it
is a dead OS, and even the vendor for it is no longer supporting it.
I have one windows box for Amateur radio, and the other computer I use
for d
What a nice piece of work Jim, thank you!
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL Asst. Director, NW Division, Technical Resource
On 6/8/19 3:53 PM, Jim Brown wrote:
On 6/8/2019 3:08 PM, Bob McGraw K4TAX wrote:
I do wish he would p
They have all more than likely been signed to NDAs... If not Elecraft
is crazy...
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL Asst. Director, NW Division, Technical Resource
On 6/5/19 11:54 AM, Leroy Buller wrote:
Are there any K4 Be
Based on the lack of ability to chance the CW rise times, I suspect
Elecraft will not give access to the processor, and OS. I would not.
Why? If too many users change things, and break things, the radio will
get a bad rep... If Elecraft is smart, they will lock the users out of
that level o
John,
That implies that all the noise is coming from the PS! I has always
assumed that most of the noise was from the monitor itself!
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL Asst. Director, NW Division, Technical Resource
On 5/26
That is how I buy potentially noisy items as well...
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL Asst. Director, NW Division, Technical Resource
On 5/26/19 7:30 PM, Bob McGraw K4TAX wrote:
I know it is really aggravating but many places
Vendors change suppliers all the time, this insures that a once quiet
piece of equipment, stands a good chance of becoming a noisy piece of
equipment in the future, or vice versa. Hence why lists don't always work.
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Technical Specialist
ARRL
I do the same, sort on reflector, then things become simple... If your
email client allows sorting, sort on the sender...
Jim,
I also use Thunderbird! :)
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL Asst. Director, NW Division, Techni
the house - trust
me it makes a difference!
Hank
K4HYJ
- Original Message -----
From: Dave Cole (NK7Z) (d...@nk7z.net)
Date: 05/21/19 11:30
To: Elecraft Reflector (elecraft@mailman.qth.net)
Subject: [Elecraft] P3: Removing the plastic display cover
Hello,
I have a bit of dust behind the plast
Hello,
I have a bit of dust behind the plastic display cover on my P3, between
the case and the cover.
In reviewing the kit assembly instructions, it looks as if the four
screws on the four corners of the plastic display cover are also used to
hold the entire display board in place on the fr
It will be interesting to go through the for sale ads on QRZ, and QTH
looking at who sold a K3S in the months leading up to the release date
of the K4, then do the same for the time period of the K3 to K3S
transition.
If it is the same people, then we can guess at who had advanced
knowledge,
SNAP!!
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL Asst. Director, NW Division, Technical Resource
On 5/16/19 4:35 PM, kevinr wrote:
Yes.
On 5/16/19 4:32 PM, kb2mj...@att.net wrote:
Do you have any documented proof of this, like I
It IS in your buffer...
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL Asst. Director, NW Division, Technical Resource
On 5/16/19 10:56 AM, Frank Krozel wrote:
It IS on the Elecraft site
https://elecraft.com/products/k4-transceiver?fbclid
Print that page to a file...
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL Asst. Director, NW Division, Technical Resource
On 5/16/19 12:36 PM, Dick Dickinson wrote:
Price of K4..?
As a starting point, consider the "Spring Special" on t
Phil,
You nitpicker you! :) Was good to see you in PDX last week!
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL Asst. Director, NW Division, Technical Resource
On 4/26/19 11:22 AM, Phil Kane wrote:
On 4/26/2019 11:01 AM, Wayne Burdick
Now that is funny!
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL Asst. Director, NW Division, Technical Resource
On 4/26/19 3:08 PM, donov...@starpower.net wrote:
It especially depends on what part of the world you're in...
Years ago M
ys working on something new.
The real question is "when", and that will be unknown until it is
announced.
Whether it will be called "K4" or something else remains to be seen at
announcement time.
73,
Don W3FPR
On 4/16/2019 7:20 PM, Dave Cole (NK7Z) wrote:
Hi Wayne,
OK,
Hi Wayne,
OK, I'll be the one to ask... Is this Elecraft's way of saying a K4 is
forthcoming? ;)
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL OOC for Oregon
On 4/16/19 8:56 AM, Wayne Burdick wrote:
It has often been stated, by both
And?
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL OOC for Oregon
On 4/15/19 5:22 PM, CUTTER DAVID via Elecraft wrote:
I had a nice chat with Eric talking about remoting the P3
David G3UNA
On 15 April 2019 at 23:01 Barry Baines via Elec
Hello,
I am considering the use of a remote base type of setup to get away from
the RFI in my area. I have finally given up on trying to fight it, and
want to move the rig away from the city, as opposed to hunting down and
correcting every new RFI source endlessly.
My station consists of a
Thank you gents! Now to uppack my KPA500 which came back from support
today...
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL OOC for Oregon
On 4/8/19 1:31 PM, Bob McGraw K4TAX wrote:
I agree with Joe in the procedure. As to using or t
A few months ago someone asked how to move the antenna signal coming in
on the main antenna connector of a K3 to an external SDR via some
connector in the rear of the K3.
The answer indicated connecting the SDR antenna to some connector in the
rear of the radio, and pressing some number of fro
Actually keeping this thread open is a better thing...
It lets Elecraft users see what other options are available...
That said-- I know I would never add an MFJ item to my K3. The fact
Elecraft has allowed this thread to continue shows how open minded
Elecraft is, and how sure of their produ
How is HAARP involved in this conspiracy, it must be!
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL OOC for Oregon
On 4/3/19 12:30 PM, Fred Jensen wrote:
The week number register is in the hardware aboard the GPS satellites,
although rec
Hi Jim,
You want to look at a wider range of frequencies than the K3 IF
presents. See:
https://www.nk7z.net/sdr-rfi-survey-p1/
for a how to do this, using an SDRPlay radio.
That link goes to part 1 of a multi-part set of articles covering how I
use SDRPlay radios to see just what is happen
I must say, I agree 100% here... Upgradeable radios protect the
Elecraft user-base, and overall I suspect sell more radios... I know of
at least one person that was considering a K3, until this thread
started, now he is waiting until Dayton. Previous to that he waited...
I suspect most Elecr
Put a web server in the K4, and control it that way via IP... Also put
in JSON for radio status, and add some IP based controls for everything.
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL OOC for Oregon
On 3/25/19 4:59 AM, Mike Markow
Hi Jim,
Thanks for the detailed response!
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL OOC for Oregon
On 3/24/19 7:54 PM, Jim Brown wrote:
On 3/24/2019 4:41 PM, Dave Cole (NK7Z) wrote:
Have you found a good speaker for the K3? If so
I suspect touch screens are just a fad for rigs... Imagine one in your
moving car...
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL OOC for Oregon
On 3/24/19 5:35 PM, Al Lorona wrote:
Thaddeus sits down at the rig. Today is the day Bouv
of that
nature.
Or use a pair of the SP3 speakers for a complete and matching K-Line
station.
73,
Don W3FPR
On 3/24/2019 7:41 PM, Dave Cole (NK7Z) wrote:
Jim,
Have you found a good speaker for the K3? If so, which one is it?
__
E
6S
On Mar 24, 2019, at 4:41 PM, Dave Cole (NK7Z) <mailto:d...@nk7z.net>> wrote:
Jim,
Have you found a good speaker for the K3? If so, which one is it?
73s and thanks,
Dave (NK7Z)
__
Elecraft mailing list
Home: http://mailman.
Jim,
Have you found a good speaker for the K3? If so, which one is it?
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL OOC for Oregon
On 3/24/19 1:25 PM, Jim Brown wrote:
On 3/24/2019 12:29 PM, Dave Cole (NK7Z) wrote:
My current K3 is
Now that I have owned a K3 for a few years, I have what the new folks
don't have, K3 experience...
Here is my take on this, now that I have some experience under my belt...
How much better can Elecraft make a K4, as compared to a K3?
I am already atmospheric noise limited, so sensitivity is no
I found the same, so I put together a process of using an external
keypad to control the K3. I use a Genovation 64 key keypad, and can
fire macros at the K3/P3 using it.
See:
https://www.nk7z.net/adding-external-keypad-k3/
I also have a spread sheet about half way down, under "Tips", that ha
Thanks Jim!
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL OOC for Oregon
On 3/14/19 11:11 AM, Jim Brown wrote:
On 3/14/2019 7:51 AM, Dave Cole (NK7Z) wrote:
Has anyone interfaced a set of DC H7030 headsets to a K3? If so, what
were
Hi,
Has anyone interfaced a set of DC H7030 headsets to a K3? If so, what
were the results? Did they work, how did they sound on receive and
transmit? I have inherited a set, and am considering using them, and
looking for thoughts on this prior to getting them connected...
--
73s and than
.
73,
Victor, 4X6GP
Rehovot, Israel
Formerly K2VCO
CWops no. 5
http://www.qsl.net/k2vco/
On 10 Mar 2019 20:57, Dave Cole (NK7Z) wrote:
I have been thinking of that. When you did it, was your P3 revocered
to the same exact setup as when you saved the config file? Did you
have to resetup anything
o/
On 10/03/2019 18:14, Dave Cole (NK7Z) wrote:
I am seeing something similar to this as well... Not in SPAN, but in
REF LVL. I set REF LVL while on 30 Meters, and leave the band.
Ssometimes when I return to 30, I need to touch the REF LVL level to
get it to return...
By touch, I mean I
I am seeing something similar to this as well... Not in SPAN, but in
REF LVL. I set REF LVL while on 30 Meters, and leave the band.
Ssometimes when I return to 30, I need to touch the REF LVL level to get
it to return...
By touch, I mean I select REF LVL, then just turn the knob ever so
sli
r is going into the KPA when he
thinks it is. If not, then it is time to diagnose things in the K3.
The folks down in Watsonville are very good at diagnosing system problems of
this sort. Calling them to help solve the issue would be a good thing.
73!
Jack, W6FB
On Mar 7, 2019, at 5:50 PM,
I am writing this for a friend, who for now, has limited access to he list.
He has a KPA500/KAT500/K3. All was working fine last time he used it.
Today, the amp comes on, but no power. Here are the details...
1. Amp shows the "*" when it keys.
2. K3 shows KPA500 ON, when the amp comes on.
Does FAST also remove the light delay in the audio?
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
Award Manager, 30MDG Grid Awards
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL OOC for Oregon
On 3/3/19 7:01 PM, Bob Wilson, N6TV wrote:
Check CONFIG:TX MON, to see if it is set to NOR
Hi,
I have an ALS-1306 amp, and Elecraft control cable for sale. Bought a
KPA-500, so the ALS is no longer needed. If interested, contact me OFF
LIST directly at my email.
--
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
Award Manager, 30MDG Grid Awards
ARRL Technical Specialist
ARRL Vol
Logs? Can you expand on that a bit? Does the KPA500 keep logs? How
are they available please?
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
Award Manager, 30MDG Grid Awards
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL OOC for Oregon
On 2/28/19 1:35 PM, Kevin der Kinderen wrote:
the IF out
coax and the RS-232 connection.
The KAT500/KPA500 connect using the AUX cable - that is no
interconnection between the P3 and the KAT500/KPA500, they are entirely
separate.
73,
Don W3FPR
On 2/16/2019 9:06 PM, Dave Cole (NK7Z) wrote:
Can you expand on:
"There
Fred wrote:
Hi Dave,
The pdf files you will find at
http://www.ke7x.com/home/k-line-introduction-and-set-up-guide may be of
some help.
73,
Fred KE7X
*From:* elecraft-boun...@mailman.qth.net
on behalf of Dave Cole (NK7Z
16/2019 7:51 PM, Dave Cole (NK7Z) wrote:
Hello,
I have a K3, and a P3, connected to a computer. I now have a KAT500,
and a KPA500.
I do not see a full cabling diagram for the entire setup. Does one
exist? If so, where
Hello,
I have a K3, and a P3, connected to a computer. I now have a KAT500,
and a KPA500.
I do not see a full cabling diagram for the entire setup. Does one
exist? If so, where can I obtain it?
--
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
Award Manager, 30MDG Grid Awards
ARRL Tech
Hi Bob,
On a related subject, but not quite what you asked about, if you are
just looking for a way to fire off macros at the K3, and have the SVGA
for the P3, see:
https://www.nk7z.net/adding-external-keypad-k3/
This is a way to use a 64 key Genovation keypad to fire off complex
macros to
It is one hell of a nice read Jim, THANK YOU for publishing it.
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
Award Manager, 30MDG Grid Contest
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL OOC for Oregon
On 1/13/19 9:24 PM, Jim Brown wrote:
I'm not going to go beyond this on the re
under various filtering conditions.
In other words, you are asking a very complex question, and you have not
given us the other configuration settings and filters to be used - other
than AGC OFF. For that reason, your K3 may have a different answer than
others.
73,
Don W3FPR
On 1/13/2019 3:43 PM,
an no longer hear the noise source between dits.
Then either calculate the off times for the dits or measure it on an
oscilloscope.
73,
Don W3FPR
On 1/13/2019 2:07 PM, Dave Cole (NK7Z) wrote:
Hi again Scott,
Thank you for your answer, but I am not being clear.
Not during break in, just sitting
Contest
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL OOC for Oregon
On 1/13/19 10:25 AM, K9MA wrote:
On 1/13/2019 12:10, Dave Cole (NK7Z) wrote:
Is it faster than .0001 ms?
Certainly not. I'm not sure whether it is recovery time or latency, but
in full break-in mode, you hear no
menu
parameter.
Fast is very quick - just watch the S-meter to get some visual indication.
73,
Don W3FPR
On 1/13/2019 11:49 AM, Dave Cole (NK7Z) wrote:
Hello,
Anyone able to answer this question please?
In the presence of a strong signal, say -75 db, (or around S9), once
that signal ceases, how
DCY menu
parameter.
Fast is very quick - just watch the S-meter to get some visual indication.
73,
Don W3FPR
On 1/13/2019 11:49 AM, Dave Cole (NK7Z) wrote:
Hello,
Anyone able to answer this question please?
In the presence of a strong signal, say -75 db, (or around S9), once
that signal
Hello,
Anyone able to answer this question please?
In the presence of a strong signal, say -75 db, (or around S9), once
that signal ceases, how long does it take the K3 receiver to return to
normal receive capability again?
--
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
Award Manager, 3
The part of the Amazon ad located at:
https://www.amazon.com/Koss-sb45-SB-45-Communication-Stereophones/dp/B00081A2CW
that says:
"Oxygen-free copper voice coils improve signal transmission & conduction
for a clearer & louder sound."
makes me wonder about the rest of the statements on the ad.
Bottom line... We all spent thousands on our setups, why cheap out on a
connector...
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
Award Manager, 30MDG Grid Contest
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL OOC for Oregon
On 1/3/19 1:29 PM, Bob McGraw K4TAX wrote:
That's why I
6 in Virgo.
Dave K1WHS
On 1/3/2019 12:25 AM, Dave Cole (NK7Z) wrote:
We now know "what" is falling off, the next question is why is a part
dropping off?
I must have missed that, can someone refresh my memory please?
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
Award Manager, 30M
We now know "what" is falling off, the next question is why is a part
dropping off?
I must have missed that, can someone refresh my memory please?
73s and thanks,
Dave (NK7Z)
https://www.nk7z.net
Award Manager, 30MDG Grid Contest
ARRL Technical Specialist
ARRL Volunteer Examiner
ARRL OOC for Or
201 - 300 of 637 matches
Mail list logo
