s are valid
ones, and like most engineering matters there are tradeoffs to both
approaches. Some tradeoffs involve significant smoke and flames... !
73, Dean, N6BV
-Original Message-
From: Joe Subich, W4TV [mailto:li...@subich.com]
Sent: Tuesday, December 13, 2011 11:21 AM
To: Dean Straw
Jim Brown said:
Mon, 12 Dec 2011 17:10:36 -0800
> I have not attempted to measure the Zo of the bifilar wound chokes I've
> built using #12 and #14 THHN, but Jerry Sevick, in the last of his
> books, did wind some using exactly that method and that wire, and he
> says the Zo of those he wound
Balun at Input or Output of Antenna Tuner?
Dean Straw, N6BV (Senior Assistant Technical Editor, Retired) December 12,
2011
I have been lurking on the Elecraft Reflector monitoring the animated
discussion about where to place a balun -- at the input or the output of a
tuner. I was going to jump
MAIN input was not getting
through. Simply re-soldering the connection brought operation to normal.
73,
Dean Straw, N6BV
You said:
Message: 15
Date: Wed, 24 Dec 2008 15:18:33 +0100
From: "Frank R. Oppedijk"
Subject: [Elecraft] K3 Subreceiver ANT selection doesn't work - always
Sent: Thursday, November 13, 2008 1:28 AM
To: Dean Straw
Subject: Re: in-band-IMD test
The Audio mod is a very simply! You just need to add simple two resistor
pararell on KIO3 module and replace one RFI choke! If anyone need mode just
send me mail and I will forward pdf direct
now the details of the K3's AGC system,
however.
Have you tried the S9+50 dB input signal with the "Slow" AGC setting?
73, Dean Straw, N6BV
GA for all K3 users.
So many guys has talks about perfect audio sound of K3.
So many talks about "analog K3 sound" on e-ham.
But
Thanks, Lyle.
73, Dean, N6BV
-Original Message-
From: Lyle Johnson (via Nabble)
[mailto:[EMAIL PROTECTED]
Sent: Monday, November 10, 2008 11:52 AM
To: Dean Straw
Subject: Re: [Elecraft] K3 RF Feedback Problem
> Is remove of L4 on the front panel board and L7 on the K
Lyle:
Is remove of L4 on the front panel board and L7 on the KIO3 audio board
"official" Elecraft modifications?
I'd hate to void my warranty by messing with something that isn't official.
Thanks, Dean Straw, N6BV
Lyle Johnson wrote:
>
>> I bit the bull
8 matches
Mail list logo