n 2/5/2021 10:22 AM, Ed Stallman wrote:
I'm using the LP-100A watt meter and comparing it with the KPA-1500
they both read close enough 10 to 160 . On 6m I'm seeing a bigger
spread with the LP-100A reading 1500w the KPA-1500 is showing 1375w .
I also have an LP100A inline between m
x27;s adjustable in the KPA 1500 but I'll not bother
. Thanks everyone for ur reply .
73 Ed N5DG
On 2/5/2021 5:06 PM, Lou W0FK wrote:
Ed Stallman-2 wrote
The KPA1500 is new to me and very happy with my purchase . I'm using the
LP-100A watt meter and comparing it with the KPA-1500
The KPA1500 is new to me and very happy with my purchase . I'm using the
LP-100A watt meter and comparing it with the KPA-1500 they both read
close enough 10 to 160 . On 6m I'm seeing a bigger spread with the
LP-100A reading 1500w the KPA-1500 is showing 1375w . If you look at
this in DB , it'
away.
73,
Bill WE5P
Comfortably Numb
On Jan 15, 2021, at 12:42, Ed Stallman wrote:
I signed up to the Elecraft mail reflector yesterday , I've not used the
reflector for the past 3.5 years . My question , is this the place to ask
question about the KPA-1500 and other Elecraft produc
I signed up to the Elecraft mail reflector yesterday , I've not used the
reflector for the past 3.5 years . My question , is this the place to
ask question about the KPA-1500 and other Elecraft products ? Is their a
specific place for questions on the KPA-1500? Maybe an IO Group ?
Tnx Ed N5DG
I have an Elecraft K3-100 SN 66XX For Sell , I assembled this kit in
2012 . It all went together very well and has never been to Elecraft for
any repair ! I compared performance with my Factory assembled 2009 K3 SN
3XXX and they are equal !
K3-100 with the KXV3A , IF out and Xverter interface
Gary and all on the list , I have sold the KXV3A board
Ed N5DG
On 3/27/2018 10:42 PM, Gary Hembree wrote:
Hi Ed,
I’m interested in your KXV3A board set if it’s still available.
73
Gary, N7IR
---
This email has been checked for viruses by AVG.
http://www.avg.com
I replaced this board in my K3 to the new KXV3B board . Everything is
included , Connector Panel, TMP Cable, Hardware and instruction Manual .
I will ship to you in the USA $30.00 PayPal . Please reply off list
http://www.elecraft.com/manual/E740140%20KXV3A%20Option%20Installation%20Rev%20B.pdf
Unless I missed it no one has mentioned " Karen's Time Sync " From the
time JT44 was introduced I used Dimension 4 , as computers became
faster and Op systems changed . D4 started giving me intermittent
problems ! Two weeks ago I started using Karen's Time Sync with no
plans to change .
Ed
While listening to CW and S meter setting at zero , the first dit or dah I
hear is ear piercing .. My CW sidetones do the same ! I've always used AGC
Fast in CW , Tried AGC Slow also tried adjusting AGC-THR and AGC-SLP.. I'm
sure I'm not giving enough information ... FW is 05.14 , SN 32xx. Should
I sent the to the N1MM plus group and they seem to think it a setting in
my K3
What's happening here is when I log a station on SSB , N1MM plus will
log it as CW . But not every time , sometimes it logs correctly . It
will do this in reverse also , logging a Q in CW will log as SSB
I'm sure
I too bought the Pyle 3.5 cube speakers to use with my K3 . Now under
$20.00 at Amazon ! I couldn't be happier with the audio both CW and SSB
. Soon I will order a second pair for my 2nd K3
73 Ed N5DG
On 11/22/2015 12:22 PM, Joe Subich, W4TV wrote:
I used 6" bookshelf speakers for several
I would like to ask a few questions before I start connecting cables.
For the past 2 years I've used the 15 pin ACC port from the K3 to SPE
expert 2KFA , this is working FB ! Now I want to add a Band Decoder auto
coax switch ! I have the correct Y-cable, it checks out pin for pin.
I'll wire to
I have 2 K3's and I'd like to sell one
K3-100 I assembled 07/12 serial # 6644
*KXV3ARX Ant., IF Out and Xverter Interface*
*KFL3A-6K6 kHz AM / ESSB, 8-pole
**KFL3A-400 400 Hz, 8-pole
*standard 2.7 kHz 5 -pole filter**
FW Rev 04.51
This K3 has performed equally as well as my factory asse
OK Tks all, I've got it , it was EZ in the K3 EZ program
Ed
On 11/25/2013 12:52 PM, Ed Stallman wrote:
I have my K3 TX EQ set for ear piercing penetrating audio to help
work the DX .. I have a group I rag chew with a few times a week and
they are complaining ! Is their some way to
I have my K3 TX EQ set for ear piercing penetrating audio to help work
the DX .. I have a group I rag chew with a few times a week and they are
complaining ! Is their some way to have 2 TX EQ settings that is easily
switched between ?
one for DX and the other for rag chew.
Tks Ed N5DG
__
Hello Group
My 2k-fa will be here in a week of so , in preparation I bought 2 ea DB9
Female and 2 ea DB15 male connectors (SO2R)
Here's my setup : K3 connected to computer using LP-Pan and LP-Bridge to
connect to N1MM and NAP3 ... Looking in LP-Bridge , I have a Output Com
Port #1 and #2 and
I work mostly CW weak signal and have not heard ringing with the K3 ..
Now I will say if you have your tones "CW Pitch" set at 800 Hz + or - it
may sound like ringing to you , you might try lowering the CW Pitch say
around 600 Hz or even lower
Ed N5DG
On 5/10/2013 7:36 PM, Matt Zilmer wr
I can hear. A higher NAR setting seems to take them
>out, but replaces them with the distortion from the holes in the signal,
>which sounds a lot like the original noise pulses. :-)
>
>73,
>
>Fred K6DGW
>- Northern California Contest Club
>- CU in the 2012 Cal QSO Party 6-
I finished K3 Kit 6644 yesterday and noticed today when using the NB
on 6m that it the NB will generate noise only on a few different
levels ! With NB Level on then DSP set to off .. I now turn
IF-NAR from off through the numbers 1 to 7 ...when I get to
IF-NAR 6 and 7 it is much noisier then
Both the KANT3 and KAT3 provide antenna surge protection, as well as
resistors for
bleeding off static DC charge
Ed N5DG
At 07:23 PM 7/16/2012, NH7RO wrote:
>I recently read on an antenna forum about installing a 40k ohm resistor
>across the RF input of a transceiver via one side of a PL-2
looking for an LP-PAN and sound card for the K3 ..let me know what
you have and price
Thanks Ed N5DG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Ele
Iain , Don , thanks for the help on this , I moved the one wire and
now al is working as it should .I got on 40m made a couple contacts
with great reports
Thanks Ed N5DG
At 04:14 PM 8/6/2011, Ed Stallman wrote:
>Iain and Don , you guys are on the ball, Pin 2 on the XLR is the tip
>
about the Flex - if it's really TRS, then maybe the Flex
>has a balanced mic input? The K3 input is unbalanced ("mono"
>connector),
>
>73,
>
> ~iain / N6ML
>
>
>On Sat, Aug 6, 2011 at 8:31 PM, Ed Stallman wrote:
> > Iain , thanks for your input , I
ve an external PTT source).
>
>Any chance you plugged yours into the line input instead of mic?
>
>73,
>
> ~iain / N6ML
>
>
>
>On Sat, Aug 6, 2011 at 7:32 PM, Ed Stallman wrote:
> > I' m trying to use a Heil PR 781 microphone on the K3 rear Mic jac
I' m trying to use a Heil PR 781 microphone on the K3 rear Mic jack
. With the settings I'm using now , I must scream into the Mic for
radio to transmit
Here are my settings.
Main:MIC-SEL I have set to RP, then taping the 1 sets to RPH
MIC GAIN = 60
VOX GAIN = 100
BIAS = OFF
ANTI-VOX =
Hello , I'm A new K3 user and I would like to be sure this
Microphone will work with the K3 before placing my order ... Please
have a look here
http://www.musiciansfriend.com/pro-audio/mxl-r144-ribbon-microphone
I have friends using this Mic on other radio's without audio gear and
they all s
27 matches
Mail list logo
