If that question was directed at me, the answer is that my issues were not
using my K3 and I only needed to turn off the tuner supply.
73,
Alan. G4GNX
-Original Message-
From: Ramon Tristani
Sent: Monday, June 20, 2016 6:14 PM
To: G4GNX
Cc: elecraft@mailman.qth.net
Subject: Re: [Elec
It's working just fine for me in the UK.
73,
Alan. G4GNX
-Original Message-
From: JJ
Sent: Wednesday, December 30, 2015 9:56 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Elecraft web site
Dead here as well. Same results with Google Chrome and Windows
Explorer. Browsing da
I am building a new shack in the roof space, using drywall. I plan to keep
all cables suspended on cable trays or hooks on the outside of the walls, in
the void where there is sufficient space for me to access them.
73,
Alan. G4GNX
-Original Message-
From: Robert Nobis
Sent: Thursda
Thanks Don and all others who replied.
I have not previously run the KAT500 utility, so was unaware of its
capabilities. I have it installed now and I'm studying the facilities.
73,
Alan. G4GNX
-Original Message-
From: Don Wilhelm
Sent: Sunday, November 15, 2015 4:47 AM
To: Robert
tune fresh air.
73,
Alan. G4GNX
-Original Message-
From: Jim Brown
Sent: Thursday, September 17, 2015 6:00 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] KPA500/KAT500
On Thu,9/17/2015 9:31 AM, G4GNX - Alan wrote:
Does the KAT500 have the capability to tune a random wire, even ju
Hi all.
I am currently running an Icom IC7100 with a MFJ 998 Intellituner. I also have
a K3 which is just waiting for it’s new home to be completed and I intend to
use that as my main HF rig and I will be adding a KPA500 to the line-up.
One thing that the MFJ unit has is a separate terminal to
Sounds like a good plan Steve.
73,
Alan. G4GNX
-Original Message-
From: ad0es
Sent: Thursday, September 17, 2015 4:30 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Elecraft Digest, Vol 137, Issue 36
Hi,
When I started putting my K-Line together, and only owned the K3,
Me too Don. I am fortunate enough to have a fully equipped woodworking shop
at home.
I don't think that Home Depot, Lowes and the like are any different to the
"pile it high, sell it (not so) cheap" DIY stores we have in the UK. Even
some of our trade building suppliers are a bit suspect and y
I am about to do the same, as soon as I've finished building the staircase
to my attic conversion ham shack.
At present I have a bare room with a lot of scope and I intend to have an
operating position on one side and a small construction/repair bench on the
other.
I was discussing this with
Most of the issues with the Prolific cable/converters is with a flood of
fakes and Prolific's policy of changing the drivers to reject them. They can
be made to work using an older driver and disabling Windows Update for that
driver.
I have both, but I do prefer the FTDI.
I've just ordered
Can someone recommend one or more reliable and RF clean USB Hubs, between 6 and
8 ports, for use with the K3/FTDi serial interface, logging and rotator
software, etc., I’ll mostly be using one or more serial interfaces and some USB
driven power switching devices.
I’ve just resurrected an Acer A
11 matches
Mail list logo
