lol He didn’t promise a technical paper, just relating his pleasure with the
rig. Happy New Year
73/Gary W2CS
> On Dec 28, 2021, at 11:05, David Gilbert wrote:
>
>
> "This is the best rig I've ever used"
>
> That's a bit vague. Which other rigs are you comparing it to, and what
> spe
one (831) 763-4211
> Mobile (831) 601-6983
> Email br...@elecraft.com <mailto:br...@elecraft.com>
> Website www.elecraft.com <http://www.elecraft.com/>
>
> On Thu, May 27, 2021 at 12:13 PM Gary J Ferdinand <mailto:g...@w2cs.org>> wrote:
> I’m try
I’m trying to access the “K4 Operating Manual” on the K4 support page on the
Elecraft. I get a page not found. Is there an alternate link?
Tnx.
Gary W2CS
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Well, let’s think about this one a bit. I for one was not disappointed with
the pricing; I think they did a super job.
I have a K4D on first-group order for $4700. The new price adds $300. I’m ok
with that due to the extreme circumstances involved with getting parts, etc.
But there’s anothe
Clearly, ignore my last, Hank. Congrats on the fix.
Gary W2CS
> On Aug 10, 2020, at 4:01 PM, Hank Garretson wrote:
>
> Ooops! Another goof.
>
> Dick, K6KR fixed me up.
>
> 73,
>
> Hank, W6SX
>
> On Mon, Aug 10, 2020 at 12:55 PM Hank Garretson wrote:
>
>>
>>
>> On Sun, Aug 9, 2020
Hank, you probably already did this but if not, uninstall the P3 utility.
Reboot Windows 10. Reinstall the P3 utility from the Elecraft site. Pray.
Try again.
73/Gary W2CS
> On Aug 9, 2020, at 11:16 PM, George Thornton
> wrote:
>
> When something strange like this happens another s
The doc for the K4 talks about K4:K4 remote or from computers. Right now I and
others are using RemoteRig boxes to have K3S:K3S. Is there a means to do a
K4:K3(s) using RemoteRig? Or is a K4 required on both ends? Might you flesh
out the K4 remote configuration capabilities a bit for us? Tnx
Rule out or in the feed line. Put the amp into a dummy load and see if it
trips. Good Luck.
73/Gary W2CS
> On May 31, 2020, at 12:54 PM, Jim Miller wrote:
>
> I run 1500w for JT65 EME. No problems. My antenna measures 1.4:1 on the
> KPA1500 swr meter and therefore never engages ATU.
>
> Have
Excellent job, Ben. Back in NASA Apollo days I recall the honor of
“steely-eyed missle man” was given to someone who did a superb piece of work.
You, sir, are a steely-eye ham! Great doc too. Thanks for writing it up.
73, Gary W2CS
> On May 1, 2020, at 1:19 AM, Ben Gelb wrote:
>
> And
I have had a different experience here.
Windows 10 Pro is one of the systems I use. Recently, I discovered that, while
I was getting the usual windows updates, those updates would cease in
September. Upon further reflection it seemed that the base Windows system was
at a level of March 2018
Never mind. While the reboot of macOS did nothing, cycling the amp off then on
seems to have gotten by the verification hang. Firmware installed successfully.
73/Gary W2CS
> Begin forwarded message:
>
> From: Gary J Ferdinand
> Subject: [Elecraft] KPA1500 F/W 2.17 Install
Not my first rodeo, but I must have fouled something up. I have the 2.17
folder (containing the .hex and .rtf files) in the local folder for the KPA1500
utility. The utility says it can talk to the amp. I tell it to download the
files. I get the usual firmware download window, but it hangs o
ur 1.2 SWR resulted
>> in a load impedance of 42 Ohms, the current could go up 20 percent. On the
>> other hand, 55 A into 50 Ohms sounds a bit high. Make sure the voltage isn’t
>> dropping more than a couple Volts.
>>
>> 73,
>> Scott K9MA
>>
>&g
power?
> The first thing I would suspect is a balun that is heating, or a connector
> that is not quite tight enough.
>
> Those kind of problems will not show up at lower power, but at 1500 watts may
> become troublesome.
>
> 73,
> Don W3FPR
>
> On 3/15/2019 3:25 PM,
I’m in the process of checking out my amp. I have two dipoles (40 and 80). At
resonance both show a 1.2:1 SWR with ATU totally bypassed. With ATU on, it
remains bypassed on 80, but shows only the ATU ON LED on 40. In both cases the
resultant SWR is 1.2:1. SWR measurements are from the KPA1
> Begin forwarded message:
>
> From: Gary J Ferdinand
> Subject: Re: [Elecraft] P3 SPAN Instability
> Date: March 10, 2019 at 11:43:06 AM EDT
> To: Victor Rosenthal 4X6GP
>
> That was an excellent suggestion! I hadn’t thought of the factory reset. I
> did as y
Various searches dredged up nothing helpful. I recently developed a P3
problem. The SPAN does not get saved. Whenever I change bands to a band I had
set it, say, to 50 kHz, the SPAN resets itself to 5 kHz. Sometimes I can even
watch the display as it cranks down the bandwidth.
This is a P3
17 matches
Mail list logo
