Hello all
I thank you for all the help. I programmed it and it worked great. The only
thing that didn’t seem
to work is the band switching. maybe its my keyboard. I don’t know.
The power button is most convenient. I love it!
Any other goodies?
George NE2I
On Nov 10, 2015, at 7:57 PM, Paul
Hello All
Im playing around with the macros and trying to see if i could control the VFO
with the keyboard
(left right arrows maybe)
Anyone successful with this using the PX3 Keyboard?
George NE2I
__
Elecraft mailing list
Home:
Four Elecraft Digests in one day is more than I can swallow. As I attempt
to wade through the messages, I find a lot of stuff that doesn't seem
worthy of taking up everyone's time. Microphones, seriously?
With this much message traffic, is there a better way?
73, George, K5KG
George
I am setting up a K3/0-Mini for a friend who will use it to operate remote
stations accessible via remotehams.com service. The operator of the
K3/0-Mini, although licensed for many year and a very accomplished op, has
never
used a K3 and, therefore, is unfamiliar with the controls on the
I am helping a friend set up a new K3/0-Mini. Does the K3/0-Mini require
occasional firmware upgrades and, if so, will we use the K3 Utility to
apply them?
73, George.
George Wagner, K5KG
Sarasota, FL 34242
941-400-1960
__
I am setting up a K3/0-Mini for a friend who will use it to operate remote
stations accessible via remotehams.com service.
The K3/0-Mini was delivered with an Owner's Manual. The manual is limited
to describing how to set up the Mini to work with a PC, how to operate
with the RemoteRig
Wow, are they available anywhere in the USA? 72 George/W2BPI
--
View this message in context:
http://elecraft.365791.n2.nabble.com/SMT-handling-tip-tp7604326p7604343.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Wow!
Met him at Dayton last time I was there. Nice Fellow. We talked quite a while
about his stress and health issues.
Purchased the 3 element portable beam he had for sale at that time right out of
his hands.
73 OM…
George NE2I
On Jun 4, 2015, at 2:53 PM, dyarnes w7...@cox.net wrote:
Hi
Check out the new Rig!
George NE2I
http://www.elecraft.com/manual/K3S%20Data%20Sheet%20rev%20A1.pdf
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
In working the FQP this weekend, my KPA500 went into Standby on its own a
few times when it was transmitting. I believe it only happened when I was
on 10m.
Here were the conditions:
Transceiver: TS480
Power: appx 400 watts
Temp: 54C
Current: 10 amps during tx
HV: 61 Volts
VSWR: 1.4:1
No longer matches any antenna. I press ATU tune and hear relays working.
While relays click I see 3 watts on led and swr stays at 25.4. Does not
matter what antenna I use. If I bypass tuner and connect a dummy load it shows
25.4 to 1 swr also. Planning a trip soon so need it working.
Upgraded firmware to 2.3. Now when I turn the PA to on it only stays on a
few seconds and then turns to off by itself. What could cause this? Tnx 73
George/W2BPI
__
Elecraft mailing list
Home:
My K2 started crackling and slowly lost its audio today. Sensitivity seems ok.
Kinda sounds like one of my old tube rigs before I recap….
Thanks
George NE2I
__
Elecraft mailing list
Home:
Was working OK. Turned rig on today and when I hit tune on the kX3 it
does not tune. Two dashes show up on upper right corner of display and shows
5watts. Led on the amp under 25 is blinking. Same with dummy load. It will
auto tune OK. Strange to say the least. Any ideas? 73 George/W2BPI
Was working OK. Turned rig on today and when I hit tune on the kX3 it does
not tune. Two dashes show up on upper right corner of display and shows 5
watts. Receiver is off and led on the amp under 25 is blinking. Strange to
say the least. Any ideas? 73 George/W2BPI
Both units on the same supply. Geo/W2BPI
Is power supply on. It will do this if the power supply is off and you are
running KX3 on internal battery.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
I just made mine in the ole woodshop to carry the KX3 and PX3 together. Its
about an inch and a half higher off the desk and fairly upright
to make it feel like a single radio. Its oak so it pretty heavy and I put some
grip pad on the bottom to keep it from moving around the desk with key
I run a full K-Line - K3, P3, KPA500 and KAT500, and I have a bit of an
issue with the procedure for tuning the KAT500 with the KAT500 in Operate.
Here is the situation:
With the KPA500 in Standby, I tune the KAT500 by first pushing the Tune
button on the K3 to apply 20w of drive, and
After installing this latest firmware I have a big increase in the volume
in my headphones. I used to set it at 7 or 8. Now only need to set at 2.
Just curious why this might be. Also in the past I have not used NR. Tried it
today and the volume in the headphones goes way down.
What
K2 #4801 For sale with the following modules
160m
SSB
Audio Filter
Noise blanker
Battery bracket and charger No battery installed.
QRP antenna tuner
computer interface
Also for sale in separate box
KAT100 antenna tuner
KPA100 100watt amplifier
Both units are in good condition some minor
://www.elecraft.com_ (http://www.elecraft.com/)
On Nov 7, 2014, at 5:18 PM, George via Elecraft
elecraft@mailman.qth.net
wrote:
I am using KX3 with the KXPA100 Amp. Lately when I turn the KX3 off and
then back on the menu shows PA OFF and I have to reset it to on. Then I
also
must
I am using KX3 with the KXPA100 Amp. Lately when I turn the KX3 off and
then back on the menu shows PA OFF and I have to reset it to on. Then I also
must turn the power setting back up to 100 watts. Any one else seen this
problem. I have the latest firmware installed. 73 George/W2BPI
I am interested in purchasing a packing case for my K-Line, or at least
the KPA500+KAT500 that can be checked in as airline baggage. I prefer a
Pelican or GemStar case.
If you have any suggestions, please let me know off net.
73, George, K5KG
George Wagner, K5KG
Sarasota, FL
Begin forwarded message:
From: George n...@yahoo.com
Subject: Re: [Elecraft] []
CQ-Contest**FLASH NEWS** NPR program on Contesting and Radiosport
6am Saturday
Date: August 9, 2014 at 7:01:09 AM CDT
To: Ken Widelitz widel...@gte.net
They put it online after the show
24 matches
Mail list logo