Re: [Elecraft] WSJTX ON A MAC

I am using a Mac Mini M2Pro and use WSJT with my K4D. When you install WSJT-X, there is a readme file with specific instructions on increasing the default swap file size. One has to do this using terminal (in the utilities application folder). Have you completed this step? 73 Howard WX7HS >

Re: [Elecraft] The Most Interesting Ham in the World [New KX2 Ad]

When he is not doing SOTA activations on only peaks rated 10 with his KX2, he is at his QTH, hacienda de Watson, a sprawling complex supported by only the best staff. He is the most accomplished “fist,” able to operate CW with both hands simultaneously on his K4Ds. While relaxing, he does

Re: [Elecraft] The Most Interesting Ham in the World [New KX2 Ad]

When he is not doing SOTA activations on only peaks rated 10 with his KX2, he is at his QTH, hacienda de Watson, a sprawling complex supported by only the best staff. He is the most accomplished “fist,” able to operate CW with both hands simultaneously on his K4Ds. While relaxing, he does

Re: [Elecraft] Elecraft Digest, Vol 207, Issue 16

Be careful with acronyms. In this part of the world (Oregon), IPA translates to Indian Pale Ale. Now, where did I put that Ninkasi Total Domination IPA? 73 Howard/WX7HS > On Jul 17, 2021, at 12:43, n...@windstream.net wrote: > > This list is for 160 meter issues --not for chemistry. There w

Re: [Elecraft] FTDI driver on Win10

You should install the latest FTDI driver. There is a link on Elecraft’s website that instructs one to install the driver. Follow this link to the FTDI Site for drivers: http://www.ftdichip.com/Drivers/VCP.htm 73 Howard/WX7HS Howard Saxion > On Jul 2, 2021, at 19:13, Dave wrote: > > Hi M

Re: [Elecraft] K-Line / ZeroFive Antennas

I do not own the Zero-Five flagpole antenna but I own and have used the Zero-Five 40 meter vertical (33 feet in height). I used this antenna on 40-6 meters with my upgraded K3, KAT500, and KPA500. I do not have HOA constraints, but I live on a small urban lot that is topographically challenged

Re: [Elecraft] P3 Failure, and question

o leave an antenna connected, except during active weather, but > curious if there is something sensitive in the P3 I/O area that can fail > easily from a surge, like the old RS-232 circuitry in the original K3. > > Thanks, > > -- Dave, N8SBE > > Quoting Howard Saxion via

Re: [Elecraft] P3 Failure, and question

I had a similar problem with my P3 with SVGA. I had to cycle through the on-off switch a few times before it would fully power up. Once powered up, everything was working and stable. I tried reseating the ribbon cables but that had no effect. I contacted Elecraft technical support and they h

[Elecraft] WTB Elecraft XG3 Signal Source

I want to buy an Elecraft XG3 signal source. If you have one to sell, please contact me describing its condition and asking price including shipping to 97405 (Eugene, OR). 73 Howard/WX7HS __ Elecraft mailing list Home: http://mailman.

[Elecraft] K4 and Transmit Monitor

Will the transmit monitor currently used with a P3 work with the K4? If not, will the K4 have similar functionality provided by the P3 and transmit monitor? Howard/WX7HS __ Elecraft mailing list Home: http://mailman.qth.net/mailman/list

Re: [Elecraft] KX3 ATU not working

The only time I have seen this SWR on my KX3 is when the internal batteries (eneloop) were partially discharged and the voltage was 8.5 vdc (tuning caused the voltage to drop to 8.2 vdc). I noticed this when testing beta firmware for Elecraft to assess ATU behavior using different voltages Hav

Re: [Elecraft] Battery Low K3

Page 48 in the K3 manual-Real Time Clock Battery Replacement. It is a CR2032, BR2032, or equivalent. Maybe it is time to check the one in my K3. K3 Howard/WX7HS > On Jan 14, 2019, at 3:59 PM, Bob W7AVK wrote: > > What is the battery number for the B/B in the K3? > Mine needs replacing and