[Elecraft] Remoterig 1258MkIIs Radio Unit

Hello I need the radio unit to use with Elecraft K3/100 radio to connect to a K3/0 Mini If anyone have one that do not use and want to sell please contact me directly thanks in advance!! -- 73, Jorge CX6VM/CW5W __ Elecraft mailing li

Re: [Elecraft] remote setup with Starlink

thanks very much Jim i will try it. My Ubiquiti link is giving me too much maintenance! 73, Jorge CX6VM/CW5W El mar, 20 ago 2024 a las 13:31, James WI6X Dahl () escribió: > > > On Aug 20, 2024, at 9:24 AM, Jorge Diez - CX6VM > wrote: > > Is anyone using a remote setup wi

[Elecraft] remote setup with Starlink

hello Is anyone using a remote setup with Starlink on one side of the setup? Can you use it without problem, ports? Latency? Speed? thanks in advance!! -- 73, Jorge CX6VM/CW5W __ Elecraft mailing list Home: http://mailman.qth.net/mail

Re: [Elecraft] KPA1500 firmware 3.03 beta on Elecraft web site

hi couldn´t find last release notes just this https://elecraft.com/pages/kpa1500-1500-watt-linear-amplifier-firmware-and-utility 73, Jorge El mié, 19 jun 2024 a las 18:55, Dick Dievendorff () escribió: > Navigate thru support, firmware & software, amp firmware, KPA1500 > > Release notes are on

Re: [Elecraft] K3 no transmitting

> Bill > K9YEQ > -- > *From:* elecraft-boun...@mailman.qth.net > on behalf of Jorge Diez - CX6VM > *Sent:* Thursday, June 6, 2024 12:41:26 PM > *To:* Robert Bajuk > *Cc:* elecraft@mailman.qth.net > *Subject:* Re: [Elecraft] K3 no transmitting > > hello

Re: [Elecraft] K3 no transmitting

ecraft-K3/topic/replacing_k3_lpa_devices/18108669 > > 73 Robert, S57AW > > On Thu, 9 May 2024, 15:08 Jorge Diez - CX6VM, > wrote: > >> hello! >> >> I have a friend that is trying to get to LPA on the K3 >> >> Really it needs to disassemble practically

Re: [Elecraft] K3 no transmitting

Robert thanks very much!! 73, Jorge El jue, 9 may 2024 a las 10:35, Robert Bajuk () escribió: > Hi Jorge, > > Try this source > > https://groups.io/g/Elecraft-K3/topic/replacing_k3_lpa_devices/18108669 > > 73 Robert, S57AW > > On Thu, 9 May 2024, 15:08 Jorge Diez -

Re: [Elecraft] K3 no transmitting

; > > > On Fri, Mar 8, 2024 at 8:31 PM Jorge Diez - CX6VM > wrote: > >> thanks Steve >> >> Could you please point me to the assembly manual page to find it? >> >> Mine is factory assembled, but I need to fix it here in my country, I need >> to try

Re: [Elecraft] Lightning concerns: Was: K4 Remote: My QTH vs. a friend's, many miles to the north

for more robust I/O design, better serviceability and improved > documentation. I hope your challenges are behind you soon! > > 73, Peter (VK6HP) > > > > -Original Message- > From: elecraft-boun...@mailman.qth.net > On Behalf Of Jorge Diez - CX6VM > Sent: Monda

Re: [Elecraft] Lightning concerns: Was: K4 Remote: My QTH vs. a friend's, many miles to the north

ach other AND to the one common safety ground of the > > building (US and other countries require this, by law). Use of water > > pipes is no longer code, in the US (because PEX and PVC are common, > > defeating ability to take to ground). > > > > From your descriptio

Re: [Elecraft] K4 Remote: My QTH vs. a friend's, many miles to the north

on Sunday, but I fear the Sun will not assist much... Take care > my friend... > > 73, and thanks, > Dave (NK7Z) > https://www.nk7z.net > ARRL Volunteer Examiner > ARRL Technical Specialist, RFI > ARRL Asst. Director, NW Division, Technical Resources > > On 5/4/24 17:

Re: [Elecraft] K4 Remote: My QTH vs. a friend's, many miles to the north

rotection always rests with the device owner. > > 73, and thanks, > Dave (NK7Z) > https://www.nk7z.net > ARRL Volunteer Examiner > ARRL Technical Specialist, RFI > ARRL Asst. Director, NW Division, Technical Resources > > On 5/4/24 16:36, Jorge Diez - CX6VM wrote: > >

Re: [Elecraft] K4 Remote: My QTH vs. a friend's, many miles to the north

care of your own lightening protection. > > 73, and thanks, > Dave (NK7Z) > https://www.nk7z.net > ARRL Volunteer Examiner > ARRL Technical Specialist, RFI > ARRL Asst. Director, NW Division, Technical Resources > > On 5/4/24 09:10, Jorge Diez - CX6VM wrote: > > Last

Re: [Elecraft] K4 Remote: My QTH vs. a friend's, many miles to the north

3, > Alan - G4GNX > South Coast UK > Elecraft K4D / KPA500 / KAT500 / IC-9700 > > > > > > On 4 May 2024, at 17:10, Jorge Diez - CX6VM > wrote: > > > > Wayne > > > > What worries me is having a very expensive device like a K4 connected in >

Re: [Elecraft] K4 Remote: My QTH vs. a friend's, many miles to the north

Wayne What worries me is having a very expensive device like a K4 connected in a remote place, to the antennas, power and internet How to avoid damage to the equipment? Last week I experienced a lightning strike and the I/O module of my KPA1500 was damaged, what has Elecraft thought to ensure th

[Elecraft] KPA1500 schematic file

Hello there´s no KPA1500 schematic file available? -- 73, Jorge CX6VM/CW5W __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net Thi

Re: [Elecraft] K3 no transmitting

t ...and a > magnifying glass . > > 73 steve G1MPW. > > > On 08/03/2024 13:58, Jorge Diez - CX6VM wrote: > > hello > > > > My newer K3 is not TX anymore, on any mode, CW, SSB, FT8 > > > > > _

Re: [Elecraft] K3 no transmitting

---Original Message- > From: elecraft-boun...@mailman.qth.net > On > Behalf Of Jorge Diez - CX6VM > Sent: Friday, March 8, 2024 8:59 AM > To: Howard K6IA Elecraft Support ; Elecraft > Reflector > Subject: [Elecraft] K3 no transmitting > > hello > > My newer K3 is

[Elecraft] K3 no transmitting

hello My newer K3 is not TX anymore, on any mode, CW, SSB, FT8 The reception is OK, I can listen without problem, all buttons works OK, I cal also decode in FT8 But when I want to transmit, no RF output, on any mode I do TUNE and the display show two lines ( _ _ ) and 0 W We used it in ARRLDX

Re: [Elecraft] K3 LINE IN

hello Jim thanks for the help I verify and both Windows and WSJT are using USB audio CODEC, so seems is something else thanks! 73, Jorge El lun, 22 may 2023 a las 16:20, Jim Brown () escribió: > On 5/22/2023 9:18 AM, Jorge Diez - CX6VM wrote: > > Any idea what is wrong? > >

[Elecraft] K3 LINE IN

hello I have a remote setup, K3/100 at the station, K3/o mini at home, TASCAM US-125M for digital Usually I have TASCAM LINE know at the second line level (it have 9 lines levels) and K3 AF knob at the second point level I needed to disconnect all the equipments last week. Then assembled all in

Re: [Elecraft] KPA1500 HIGH DISS and GAIN LOW

ce=link&utm_campaign=sig-email&utm_content=webmail> Virus-free.www.avast.com <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail> <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2> El lun, 15 may 2023 a las 11:43, Jorge Diez - C

[Elecraft] KPA1500 HIGH DISS and GAIN LOW

hello this weekend I have two new messages on KPA1500 HIGH DISS and GAIN LOW I was trying to TUNE again my antennas on different bands and appears HIGH DISS Any idea what´s wrong? -- 73, Jorge CX6VM/CW5W __ Elecraft mailing list Home:

[Elecraft] KPA1500 remote setup help

hello I had the KPA1500 remote working fine on the SAME LAN nNow I need to control KPA1500 over the internet, different LAN in the remote site and in the control site Can anyone help me to set up the IP or dyndns service or how to control the KPA1500 over the internet? thanks in advance!! --

Re: [Elecraft] AF knob turn all around

thanks for the advices from the list I contacted Elecraft, they sent me the part kits and just arrived in Miami, FL at my cousin house that is bringing the knobs to me for Christmas, 73, Jorge CX6VM/CW5W El dom, 4 dic 2022 a las 18:02, Jorge Diez - CX6VM () escribió: > Hello Jan >

Re: [Elecraft] AF knob turn all around

Hello Jan the potmeter itself has the correct stops, I need the plastic knob to replace it But not in a hurry, waiting to Elecraft response, hopefully I will get a set of knobs and proper allen key to replace them thanks!! 73, Jorge CX6VM/CW5W El dom, 4 dic 2022 a las 17:57, Geert Jan de Groot

Re: [Elecraft] AF knob turn all around

y have no > hard stops. > 73, > eter > > Op 2022-12-03 om 02:03 schreef Jorge Diez - CX6VM: > > Hello > > > > in one of my K3 radios, AF, SUB, RF/SQL and SUB knobs turn all aroun, no > > limits on right and left side > > > > Couldn`t figure out if I n

[Elecraft] AF knob turn all around

Hello in one of my K3 radios, AF, SUB, RF/SQL and SUB knobs turn all aroun, no limits on right and left side Couldn`t figure out if I need a phillips or ALE instrument to fix it and if this will fix it properly thanks -- 73, Jorge CX6VM/CW5W _

Re: [Elecraft] Yamaha Headphones

hello Mike you have both, SB45 and SB45-USB on this link https://www.amazon.com/-/es/Koss-Estere%C3%B3fonos-de-comunicaci%C3%B3n-SB-45/dp/B00081A2CW And really a good price, $30 73, Jorge CX6VM/CW5W El lun, 21 nov 2022 a las 21:49, Mike Smith VE9AA () escribió: > While that may be true Jim, th

Re: [Elecraft] QRP and Contesting

looks like someone is having a bad day we should create a contest only for smart people hi hi hi even those who seem to be intelligent are wrong, who will have to do this with Elecraft to publish it on this list? 73, Jorge CX6VM/CW5W El mar, 8 nov 2022 a las 19:16, Jim Brown () escribió: > On

Re: [Elecraft] KPA1500 ATU question

e “really good” SWR threshold, by band, in a menu or the > KPA1500 Utility. I think it defaults to 1.2 to 1. > > 73 de Dick, K6KR > > > On Sep 13, 2022, at 10:14, Jorge Diez - CX6VM > wrote: > > > > hello > > > > How can I use the KPA1500 to remember what

Re: [Elecraft] KPA1500 ATU question

er frequencies. I don’t turn the ATU on and off, my > ATU relay settings are “bypassed” on some frequencies. > > You can choose the “really good” SWR threshold, by band, in a menu or the > KPA1500 Utility. I think it defaults to 1.2 to 1. > > 73 de Dick, K6KR > > > On

[Elecraft] KPA1500 ATU question

hello How can I use the KPA1500 to remember what bands need ATU IN and what bands need ATU BYP? I have ATU IN on HF bands, but when I change to 6 mts I need that KPA1500 change to ATU BYP Is this possible? thanks! -- 73, Jorge CX6VM/CW5W

[Elecraft] KPA1500 5V ERR

Hello Today I received this message. What causes it? thanks -- 73, Jorge CX6VM/CW5W __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.

Re: [Elecraft] KPA1500 power supply (remote)

; > 73. Lou W0FK > > Lou Laderman > Sent from my mobile device > > On Aug 14, 2022, at 8:29 AM, Jorge Diez - CX6VM > wrote: > > Hello! > > when you use the KPA1500 remotely, the power is always on. With which it > could spend several years on continuously. Co

[Elecraft] KPA1500 power supply (remote)

Hello! when you use the KPA1500 remotely, the power is always on. With which it could spend several years on continuously. Could this be harmful to the power supply? Is it thought and designed to withstand this? Is there a way to turn the power on and off remotely? thanks! -- 73, Jorge CX6VM/

Re: [Elecraft] K3/0 mini N1MM+ not sending CW from function keys

, Jorge Diez - CX6VM () escribió: > Hello > > I have a remote connection, K3/100, K3/0 mini connected with remoterig > boxes > > It was working perfectly. I needed to format the control laptop. Installed > Windows 10 again and all software. > > I can do SSB and digit

[Elecraft] K3/0 mini N1MM+ not sending CW from function keys

Hello I have a remote connection, K3/100, K3/0 mini connected with remoterig boxes It was working perfectly. I needed to format the control laptop. Installed Windows 10 again and all software. I can do SSB and digital, also I can send CW with paddles, BUT I cannot send CW with N1MM+ function key

[Elecraft] KPA1500 segment SWR memory

Hello I read that KPA1500 have a memory to recognize SWR of the antennas on different frequencies What happen if the antenna vary SWR periodically? My warc dipole vary SWR, usually I have 1.5:1 on 18070, but today (raining day) SWR is 1.17:1 Is this a problem for KPA1500? Thanks for the fee

[Elecraft] K3/0 Mini and P3

Hello I have a K3/100 on the radio site and a K3/0 Mini on the control site, running perfectly with remoterig boxes How can I add the P3 SVGA to the control site? Couldn't find the connections for that in Google thanks! -- 73, Jorge CX6VM/CW5W _

Re: [Elecraft] MH2 mic and the K3

Hello Mike Yes, it works with K3 https://ftp.elecraft.com/MH2/E740030_MH2_Rev_D.pdf 73, Enviado desde mi iPhone > El 26 ene. 2021, a la(s) 15:14, NJMike escribió: > > Will the MH2 hand mic that was originally for the K2 work with the K3? I > know there is an MH4 mic now that works with bo

Re: [Elecraft] KX3 radio settings for WSJT-X, Article reference

Cary is that article for MMTTY? http://w3fpr.com/Data_setup.htm is the same setup for WSJT-X? 73, Jorge CX6VM/CW5W El jue., 27 ago. 2020 a las 8:49, Hunsdon Cary III () escribió: > David: > Go to Don’s web page, W3FPR.com, and you’ll see a list of links on the > left side of the page. Las

Re: [Elecraft] K4???

Hi Tom did you contact Elecraft? 73, Jorge CX6VM/CW5W El vie., 15 may. 2020 a las 12:52, Tom Doligalski via Elecraft (< elecraft@mailman.qth.net>) escribió: > It has been exactly 52 weeks since I placed an order for the K4, with a > full deposit. > > I truly understand all of the current diffic

Re: [Elecraft] K3 XMIT/TUNE button doesnt work

raft.com for more information and guidance. > > 73, > Don W3FPR > > On 5/8/2020 4:40 PM, Jorge Diez - CX6VM wrote: > > hello > > > > my K3 have a problem with this button. some weeks ago, I need to push it > > hard to have it working. > > > > Now

[Elecraft] K3 XMIT/TUNE button doesnt work

hello my K3 have a problem with this button. some weeks ago, I need to push it hard to have it working. Now doesnt work. Definitely is bad Any idea how to fix that? Hope is something easy I can solve locally thanks!! -- 73, Jorge CX6VM/CW5W ___

Re: [Elecraft] how to jump kc to kc

1.0 in VFO A Display > 4) Tap MENU to exit Config. > > Enjoy > > ______ > Clay Autery, KY5G > (318) 518-1389 > > On 05-Oct-19 15:11, Jorge Diez - CX6VM wrote: > > Hello > > > > I want to rotate VFO with no decimals, foe example from 14001,

[Elecraft] how to jump kc to kc

Hello I want to rotate VFO with no decimals, foe example from 14001, 14002, 14003, 14004, 14005, 14030 Is there anyway to jump kc to kc? -- 73, Jorge CX6VM/CW5W Libre de vi

[Elecraft] DAYTON DISCOUNT?

Hello is there any Dayton discount to buy K3, P3, K3/0, cables, powe supply, etc, etc? -- 73, Jorge CX6VM/CW5W Libre de virus. www.avast.com

Re: [Elecraft] K4 Press Release

tomorrow? hi hi hi don´t worry, you will have many years to enjoy your K3S, if you have one 73, Jorge El jue., 16 may. 2019 a las 21:17, escribió: > I wonder when the K3S and P3 will be discontinued? > > Hank > K4HYJ > > -Original Message- > From: elecraft-boun...@mailman.qth.net >

Re: [Elecraft] Configuration of N1MM with K3 RemoteRig

Charly You also need a rs232 to usb interface, from COM1 on front of remoterig box to another USB port on the local computer running N1MMLogger 73, Jorge CX6VM/CW5W Enviado desde mi iPhone El 4 may. 2019, a la(s) 13:50, Charles Tropp escribió: > Hi, > > I recently installed a private K3-R

Re: [Elecraft] radio and amplifier tuner

cans. > > > On Mar 31, 2019, at 12:19 PM, Jorge Diez - CX6VM > wrote: > > > > Hello > > > > just to know how is the correct way to use tuner, for example on an > antenna > > that have SWR 2:1, I use the K3 internal antenna tuner to adjust it, and > >

[Elecraft] radio and amplifier tuner

Hello just to know how is the correct way to use tuner, for example on an antenna that have SWR 2:1, I use the K3 internal antenna tuner to adjust it, and then I tune my amplifier (old tube amplifier) With the KPA1500, that have antenna tuner, how is the right way to use tuners on radio and ampli

[Elecraft] E850512 cable connections

Hello I am trying to build a cable for remoterig box for digital. On K3 Remote Owner's Manual Rev D.pdf page 26 https://ftp.elecraft.com/K3-Remote/Manuals%20Downloads/K3%20Remote%20Owner's%20Manual%20%20Rev%20D.pdf RJ45 #5 is going to 8-pin DIN # 2 or #4? Picture say #4 but text say #2, wh

Re: [Elecraft] Will there be a K4

It happened with me too They will not tell you about this, but just in case wait after Dayton I am waiting after Dayton to know if will be a smaller remote option (integrated K3/0 mini + remoterig) 73, Jorge CX6VM/CW5W Enviado desde mi iPhone El 24 mar. 2019, a la(s) 13:22, Bob McGraw K4TAX

Re: [Elecraft] Remote On/Off KPA-1500

hello what are the diferent ways to turn KPA1500´s on/off remotely? Is there any way to turn it on/off alone, with no need to turn on/off the K3? For example i want to turn on K3, but want to have KPA1500 off, is there any way to do that? thanks, Jorge CX6VM/CW5W

Re: [Elecraft] new K3/0 Mini

traft’s approach is ’simpler’ in > > terms of making it possible to operate remotely, but it does appear > > relatively ‘kludgy’ given that it could certainly be streamlined if they > > thought it is worth the time and effort.If one is focused on ’pickup > > and go’ remote

Re: [Elecraft] new K3/0 Mini

19, 9:12:51 AM EST, Jorge Diez - CX6VM > wrote: > > Hello > > any idea if will be a new control radio for remote? Like K3/0 Mini with > remoterig integrated inside it? > > Maybe for Dayton will ha

[Elecraft] new K3/0 Mini

Hello any idea if will be a new control radio for remote? Like K3/0 Mini with remoterig integrated inside it? Maybe for Dayton will have it? -- 73, Jorge CX6VM/CW5W __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo

Re: [Elecraft] Inrad W1 Headset and K3

Hi Jim I bought several MC500, I am happy with them, but not good isolation when doing multi on SSB And the foam is shelled very quickly 73, Jorge Enviado desde mi iPhone El 18 feb. 2019, a la(s) 19:56, Jim Brown escribió: > On 2/18/2019 5:02 PM, Dick Dievendorff wrote: >> I used mine this

[Elecraft] Inrad W1 Headset and K3

hello anyone use the new Inrad W1 Headset with K3? What´s the headset connectors, both 3.5 mm like CM500? thanks for the info! -- 73, Jorge CX6VM/CW5W __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft H

Re: [Elecraft] KPA-1500 failed!

Guys the problem here is not who use PL259 or what coaxial is using. I think Peter and most of us, and mostly if you do contests, is not that, we are using good coax and connectors over the years and no problem with other radios or amplifiers, thats what Peter said. If you are in a contest, you p

Re: [Elecraft] K3/0 Mini and remoterig integration

Well now I know, that in 2013, Microbit made a PCB which fitted into the K3/0 mini with all included, even Wifi, Would me good if Elecraft take again this and now do something about it PCB is working, Microbit CEO use it 73, Jorge CX6VM/CW5W El sáb., 9 feb. 2019 a las 10:55, Jorge Diez

[Elecraft] K3/0 Mini and remoterig integration

I did my first travel with my remote setuo (K3/100 and remoterig) and i was thinking to minimize the cabling and size of the setup. A lot of gear and cabling to do, so went to my mind, the idea of a K3/0 Mini with a kind of remoterig INSIDE and most of the cabling already made So K3/0 Mini cable

Re: [Elecraft] KPA1500 QST Review now on-line

what that means? The amplifier also has a remote (REM) jack that can be tied into your remote power control system to power the amplifier on with 12 V dc applied and off if removed. 73, Jorge El vie., 1 feb. 2019 a las 23:08, escribió: > There is also a youtube short review that anyone can wat

Re: [Elecraft] LP-100 software

Hi I use it also, yet don’t want to use TeamViewer to see it I am using Green Heron Everyware Server and Client and want to see LP-100 the same way, less bandwidth consumption 73, Jorge Enviado desde mi iPhone El 25 ene. 2019, a la(s) 18:07, Andy Durbin escribió: > "What are you using? >

[Elecraft] LP-100 software

Hello Anyone use a server/client software to see remotely the measurements of LP-100 digital wattmeter? (SWR and PWR) What are you using? 73, Jorge CX6VM/CW5W Enviado desde mi iPhone __ Elecraft mailing list Home: http://mailman.qt

[Elecraft] PWR12V1A-US voltage

hello what about this power supply for K3/0 Mini? is international voltage 110-240? thanks!! -- 73, Jorge CX6VM/CW5W Libre de virus. www.avast.com

Re: [Elecraft] K3/0 MINI manual or photos

! > > On Fri, Nov 16, 2018 at 3:01 PM Jorge Diez - CX6VM > wrote: >> Hello >> >> do you know where to find K3/0 MINI photos (front/back/sides) to see all >> connecttos that it have? >> >> Manual is only for sale on Elecraft website >> >>

[Elecraft] K3/0 MINI manual or photos

Hello do you know where to find K3/0 MINI photos (front/back/sides) to see all connecttos that it have? Manual is only for sale on Elecraft website -- 73, Jorge CX6VM/CW5W Libre de vir

Re: [Elecraft] KPA1500 fan noise concern

That’s will be great! Enviado desde mi iPhone El 29 may. 2018, a la(s) 22:47, escribió: > I was suggesting an optional hardware controller separate from the amp, not > operating it remotely though a computer. OM Power, Acom and Henry have done > this with some of their models. > > John KK9A

[Elecraft] K3 speaker with Remoterig

Hello I use K3 speaker, I programmed RIT button to switch SPKR+PH to YES and NO Now I connected Remoterig, and on control radio, I am not able to listen to K3 speaker How can I do to listen to K3 speaker, so, to hear K3 speaker when SPKR+PH = YES ? -- 73, Jorge CX6VM/CW5W

Re: [Elecraft] sharing K3 RS232 to CAT and Remoterig

or > support. > > 73, > >... Joe, W4TV > > > > On 11/14/2017 3:23 PM, Jorge Diez - CX6VM wrote: > >> Hello >> >> At my station, I have Elecraft K3, Bandmaster III, SixPack, CAT cable >> connected to K3´s RS232 >> >> So when I chan

Re: [Elecraft] sharing K3 RS232 to CAT and Remoterig

is connected to the > RS-232 jack. I often have other devices(such as a MicroHAM DigiKeyer2) also > connected to this jack using a N6TV Y-box. For two devices you can use an > inexpensive Y adaptor instead. I have no experience with a remoterig box. > > John KK9A > > > Jorge

Re: [Elecraft] sharing K3 RS232 to CAT and Remoterig

no longer works? > > I use an A/B data switch to switch my K3 CAT port between the local > computer when I'm operating with my home antenna, and the remoterig for > when I'm operating W7RN remotely. > > 73, > > Fred ["Skip"] K6DGW > Sparks NV DM09dn &g

[Elecraft] sharing K3 RS232 to CAT and Remoterig

Hello At my station, I have Elecraft K3, Bandmaster III, SixPack, CAT cable connected to K3´s RS232 So when I change bands in the radio, antenna is selected automatically through CAT cable and band decoder (Bandmaster III) Today I connected remoterig box, so needed to remove CAT cable to connect

Re: [Elecraft] Replacement earpads for Yamaha CM500

unfortunately not a friendly company is hard to find on this days a company with this policies *"The credit card has to be issued by a U.S. company and the billing address must be in the U.S"* from amazon, maybe this work but not sure https://www.amazon.com/Products-Replacement-Headphone-Earpad-

[Elecraft] P3SVGA SPAN FREQUENCIES

Hello is there any way to add more frequencies to the screen? I can see center and edges freq but I want to see any scale, for example I have 7000 - 7010- 7020, but I want to see the marks for 7001, 7002, 7003, 7004, 7005... Is this possible? -- 73, Jorge CX6VM/CW5W ___

Re: [Elecraft] line IN and OUT on new computer

Hi Josh and Jim this is a recording interface?, so may it be used for example for WRTC recording and for referee listening to both radios as required in the rules? 73, Jorge Libre de vir

Re: [Elecraft] line IN and OUT on new computer

> > > On Saturday, August 12, 2017, Mike Furrey wrote: > >> Yes, that is the one I have. There are probably less expensive ones I >> could have ordered but I needed it "NOW" and bought it off the shelf. It >> works well for me with a new laptop and Win

Re: [Elecraft] line IN and OUT on new computer

; works well for me with a new laptop and Windows 10 (Ugh). > > Mike > > > On Saturday, August 12, 2017 9:07 AM, Jorge Diez - CX6VM < > cx6vm.jo...@gmail.com> wrote: > > > Hello Mike > > thanks very much for the informations > > Is this one? https://www

[Elecraft] line IN and OUT on new computer

Hello I do digital modes with two cables from K3´s LINE IN and OUT to MIC and PHONES on my old laptop Looking for a new Laptop, I notice they combine MIC and PHONE in ONLY ONE 3.5 mm connector Any problem with that? Just need a Y cable to connect LIN IN and OUT in K3 and on the other side a 3.5

Re: [Elecraft] OT Yamaha CM-500 ear pads

They offer free shipping, so dont need to wait, just change shipping options 73, Jorge CX6VM/CW5W Libre de virus. www.avast.com

Re: [Elecraft] Mouse and P3 SVGA

look at it http://www.elecraft.com/P3/p3.htm then decide if its what you are looking for. If not, you can try other options 73, Jorge CX6VM/CW5W 2017-05-26 9:25 GMT-03:00 John K9UWA : > If the P3 with SVGA had the Point and Shoot selectable VFO's I would > purchase a P3. > John k9uwa > > > >>

Re: [Elecraft] Recording Line Out on the K3

NOW ADJUSTABLE: In CONFIG:LIN OUT menu entry, > tap '2' (REV switch) to set the "T=" level (TX monitor). Tap '2' again to > return to the RX LINE OUT setting. > > > 73, > Bob, N6TV > > On Tue, Apr 18, 2017 at 11:20 AM, Jorge Diez - CX6VM < >

Re: [Elecraft] Recording Line Out on the K3

Hello how do you control TX output for the recording? I am doing some tests, I have LIN OUT = 10 and is recording properly what I RX on MAIN and SUB receivers. But my TX on the audio file, is to high compare with RX recording With LIN OUT = PHONES and MON = 10 is OK, but i dont like to have mon

Re: [Elecraft] k3s with the bandmaster 3

Noel i think you must connect the bandmaster to your antenna switch I have a sixpack/bandmaster/K3 but bandmaster is connected to the sixpack 73, Jorge CX6VM/CW5W 2017-03-11 9:30 GMT-03:00 NOEL POULIN : > Hi, > I want to connect the BAND MASTER3 to my K3S. > Do we need a special cable to conn

Re: [Elecraft] K3 and JT65

on and TX EQ disabled. > > The DATA A mode MIC SEL should be set to LINE. > > Adjust the computer soundcard output to at least 75% and then adjust the > MIC Gain (actually Line in gain) to achieve the proper number of ALC bars. > > 73, > Don W3FPR > > > On 2/21/2017 7:22

Re: [Elecraft] K3 and JT65

firmware adjusts to the power set with the power knob rather than merely > controlling the drive with a knob. > > 73, > Don W3FPR > > > On 2/21/2017 6:36 PM, Jorge Diez - CX6VM wrote: > >> Hello >> >> I am trying JT65. Two audio cables from LINE IN and OUT i

[Elecraft] K3 and JT65

Hello I am trying JT65. Two audio cables from LINE IN and OUT in the K3 to phones and mic in the computer I can see decoding on the software, but I cannot get RF out. The K3 go to TX, but I think is not sending RF. I increase RF while TX and I dont see RF out on the K3 smeter Any help? thanks,

Re: [Elecraft] speaker and phones levels

l speaker with a variable > resistor in series. > The other way is to use amplified (computer) speakers which can usually be > turned down in volume. > The 3rd alternative is to use more sensitive headphones. > > 73, > Don > W3FPR > > > On 2/19/2017 5:36 PM, Jorge Diez

[Elecraft] speaker and phones levels

Hello is possible to decrease only the speaker volumen level and no affect the phones level? We use to have SPKR+PH ON so the people at the shack can hear how is going the contest. But when the Operator adjust AF comfortable for the phones, the speaker is very high affecting also the operator th

Re: [Elecraft] paddles directly to K3 - not working

e connected to the > "PADDLE" jack and the only way to affect the speed of the K3 internal keyer > is the speed control on the front panel of the K3. > > 73, Guy K2AV > > On Fri, Feb 17, 2017 at 3:02 PM, Jorge Diez - CX6VM > wrote: > >> Hello >> >>

[Elecraft] paddles directly to K3 - not working

Hello after many year with paddles connected to SO2R and WKUSB boxes, now I want to setup a second station for the contest. All is OK with N1MM sending messages stores in function keys, but I couldn´t get working the paddles connected directly to KEY in the back of K3 No send dits, and dots are

Re: [Elecraft] SWR issue with K3

hello talking about SWR issue, I had a issue that took my attention many moths ago but since I can solve it, now just I have the concern to know why this happens Some times i notice high SWR on the K3 (2.4:1) and normal on my LP100 (1.3:1). So i turn on the ATU, adjust SWR on the K3 with ATU TUN

Re: [Elecraft] audio recording

Aug 13, 2016, at 7:34 AM, Jorge Diez - CX6VM > wrote: > > > > hello > > > > i am trying to record audio from K3 > > > > I have a stereo cable connected from K3 LINE OUT to a hand recording > LINE IN > > > > is recording the other station aud

[Elecraft] audio recording

hello i am trying to record audio from K3 I have a stereo cable connected from K3 LINE OUT to a hand recording LINE IN is recording the other station audio but is not recording my audio I setup LINE OUT to a proper level to record the other station audio maybe is something in the menu to adjus

Re: [Elecraft] QSLs

2016 10:51 PM > To: Reflector Elecraft > Subject: Re: [Elecraft] QSLs > > LOTW runs on GMT (UTC). If you keep your log in UTC, all will be confirmed. > Except, of course, for a few stations that don't get it right. But that is > rare. > > 73, Jim K9YC > >> O

Re: [Elecraft] QSLs

That's sounds very good But LOTW don't know about propagation and confirm any match, also when one side of the QSO was during his noon time 73, Jorge CX6VM/CW5W Enviado desde mi iPhone > El 25 jul. 2016, a las 18:56, Jim Brown escribió: > >> On Mon,7/25/2016 2:42 PM, Wes Stewart wrote: >> It

Re: [Elecraft] KX3 / FLDIGI Question

wait for coming version of SWISSLOG software http://www.informatix.li/ , will have important support for FLDIGI, MultiPsk, Cw Skimmer and OmniRig 73, Jorge CX6VM/CW5W 2016-06-17 13:09 GMT-03:00 James Bennett : > For those interested….. > > Got a suggestion from Ron, W7HD that the rig has to

[Elecraft] SOLD!!! Re: FS: Green Heron RT-21pp controller

Hello The controller is sold 73, Jorge CX6VM/CW5W Enviado desde mi iPhone > El 21 abr. 2016, a las 09:31, Jorge Diez - CX6VM > escribió: > > Hello > > I have a Green Heron RT-21pp controller for sale. Very few use, like new in > original box > > Asking $ 400.

  1   2   3   >