My software setup with a K3S, LP-Pan, and Asus U5 is as follows:
LP-Bridge creating virtual ports for:
NaP3
CW Skimmer
Ham Radio Deluxe (last free version, 5.0 Build 2893, using the Logbook as my
main log)
N1MM or WriteLog for contests
Note that HRD versions newer than about 6.2 will not
Bill, if you do CW contesting, then you will want to add CW Skimmer to the
software lineup as well. I use the following setup for CW contesting:
K3s IF out to LP-Pan
LP-Pan I/Q out to Asus U5 USB card
U5 USB to PC; use MME audio driver, which allows feeding the audio to
multiple programs
Hi John:
Make sure you have the MME audio driver selected in both NaP3 CW Skimmer.
The ASIO driver does not allow sharing of the audio stream.
73,
Luther N4UW
__
Elecraft mailing list
Home:
Just acquired a used K3/10 with no options, and am looking to buy some.
Thought I would try here before ordering new. If you are interested in
selling any of the following, please let me know:
KAT3 (can swap standard 1-antenna connection board if needed)
KXV3 or 3A
CW filters, 5-pole
Jim, if you are referring to CW SP'ing, then the LP Pan/sound card combo
offers a significant advantage over the P3 if you use CW Skimmer, and a
logging program such as N1MM or Writelog. (other logging programs may also
do this) This adds the capability to point click on stations that show up
Looking to buy a used K3, either 10 or 100 watt version. Don't need fully
loaded rig, only options of interest are ATU, IF out and perhaps a CW filter
or two. Prefer ones with all hardware updates, but will consider ones
without updates if priced appropriately. Payment via PayPal only. Please
For sale, K2/10 #4118, with following installed options:
KSB2 (with Kenwood hand mic)
K160RX
KAF2
KAT2
KIO2 (with short serial port cable)
KBT2 (with good battery, which is not installed)
Rig is in good to excellent condition. Just back from ARRL FD, N4DD I
used it to make 736 CW contacts using
Hello to the Group:
K2/10 #5723, excellent condition, with the following options/mods:
K160RX, KA2F, KAT2, KDIMP, KIO2, KNB2, KSB2, K6XX CW Indicator, N0SS
External T-R Relay, Rework Eliminators Mic Header. Latest firmware, new
VFO encoder; freq. calibration, filter alignment, and tuner null
I've decided to offer up K3/10 #495 for sale or possible trade. Rig works as
advertised, has the latest firmware, and is in like-new condition. The only
installed option is the 5-pole 500 Hz roofing filter. Built from kit
observing all ESD precautions. Only deviation from instructions was the
K3/10 Kit #495 arrived safely today; ordered June 26th, shipped February
22nd. Off to the workshop!
73,
Luther N4UW
K2 4931
K3 495
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber
10 matches
Mail list logo