An issue has arisen with my KAT100. The tuner works fine but the LEDs for
the SWR do not light. The PWR and Antenna LEDs are OK. Can someone
recommend a solution?
Thanks,
MIke, W0RSR
__
Elecraft mailing list
Home:
Perhaps this is a software problem, but I thought I'd start here. Using K3
(s/n 68xx), SignalLink USB and WSJT-X. Everything works fine on FT8 on all
bands but 17 & 30. I can decode on those bands, but there is no xmit. The
rig keys OK and goes into xmit but there is no output. Radio performs
My trusty K2 (#5767) has just started acting up. It seems to be fine on all
bands but 40M. On that band, the RX seems dead, and won't tune properly
with my KAT500. It doesn't have the built in tuner. The 100W amp is built
in. Other bands show full output and normal RX. Using my other radios
Just received my KAT500 and got it all hooked up. Works perfect with my K3
and KPA500. However, when I try to use it with other radios on the desk, I
have a problem. All works OK when the amp isn't inline. But, when using
another radio (other than the K3), and you put the amp in the operate
My K3 s/n 5947, intermittently loses sensitivity on all bands after being on
for a few minutes. Usually tapping on the top of the rig restores things.
Also putting rig in xmit restores rx to normal. Doesn't last though. I've
eliminated the so 239 connector and coax as culprits. Not using the
I'm just setting up my new K3 #5947. I ordered it with the sub RX
installed. There are two issues I am trying to resolve. First, on pwr on,
I get ERR DVR message on screen. Second, when I tap SUB to activate the
sub rx, I get static in the speaker from the 2nd rx, but it' s not receiving
any
6 matches
Mail list logo