On 21 Aug 2005 at 8:40, Robert Tellefsen wrote:
> Two things will make matching easier. Get two
> baluns, 1:1 and 4:1. Put them on the two
> antenna ports of the ATU
Looking at the two versions of the BL1 for 1:1 and 4:1
Can you not use a 2pco ( dpdt ) switch or relay to change between the tw
this helps someone.
atb Mike W, G8NXD qthr
On 16 Apr 2005 at 9:11, Stephen wrote:
> Gentlefolks,
>
> I did not explain myself very well in the previous post. What I did
> was to
> use a very small drill, with a diameter smaller that that of the hole,
> and twist it gently betwe
On 9 Apr 2005 at 13:58, George Cortez wrote:
> Hi all
> 4801 was getting a upgrade (ssb adapter)
> when I noticed that listening on my other rig (Icom 746 pro.)
> the k2 was off freq by 1kc high on 40 lsb this is on tx and rx.
> It is 600hz off high on cw.
> any ideas?
How about flipping the co
AFIK, and certainly in UK, the Wanadoo ISP is far from Freemail. I'm
on Freeserve which is the UK Name for Wanadoo and I have never
experienced a bounce because of my ISP's policies.
I can't offer any good reasons why they are bouncing though sO I
suppose I had better stop using bandwidth.
73 Mi
http://www.communication-concepts.com/hf_amplifiers.htm
should be of some interest to you
--
On 30 Mar 2005 at 10:18, Andrew Moore wrote:
> I'm looking for designs for an RF amp for my K2. Can anyone point me
> to a design? I plan to use it for CW only, 40 meters only, and
> roughly 75 watts
I would be interested if you were to post the URL to this
announcement. I've searched OfCom's site, and there is no trace of
this supposed notification that I can find.
73 Mike W, G8NXD
--
On 27 Oct 2004 at 12:57, W9DHI wrote:
> UK Amateurs Gain 7.1 - 7.2MHz from 31 October
&g
Is the Binocular core used in the BL1 balun the same grade as the
binocular core used in the K2's TX strip?
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsu
Let _ME_ build your Elecraft kit.
My prices are reasonable ( I just love building the kits. But more
importantly, I need the Money ! ) and the results are
a finished radio, aligned and tested, that is really a lot of fun to
use.
Please email me at [EMAIL PROTECTED]
Seriously, if anyone in UK wo
gGen based on a 9851 DDS and a noise source for signal
generation, For detection I use a diode probe into either an AF
amplifier ( for listening to the signal ) or a VVM for measuring. All
of it homebrewed.
atb Mike W
--
___
Elecraft mailing list
Po
Hi Folks,
What is the safe maximum RF Voltage that the K2 RF Probe can measure
?.
I guess its down to something like the PIV of the diode.
Thanks and atb MIke
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post t
every months posts? ?
Cheers and Beers, Mike W
--
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/ele
g prospect.
all the best, Mike W, G8NXD
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraftHe
Hi Folks,
Using a basic K2 with no options other than SSB. How can I drive
an external PA and have PTT and ALC controlled by the K2 ?.
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber In
Hi Folks,
Is there any soundcard software to assist in optimum tuning for
best sig/noise on SSB, similar to a SINAD meter ?.
thanks
--
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
http://mailman.qth.net/mailman/listinfo/elecraft
You mus
I'm in UK and missing R116 ( the 1/8w BFO retaining R ) from the
K2 kit. Anyone recomend an alternative means of fixing the BFO
coil without it ?. I have no suitable 1/8w resistors in stock.
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
ht
GM All,
After 2 months of using my K2 I'm getting very sore fingers due to
the awfull shape of the tuning knob and its sharp edges. I know
that one of the 'JAP' knobs fits but I don't know which one, or where
to obtain one in UK.
Any help appreciated
16 matches
Mail list logo