ol of the radio
yet.
de N5QQ/Ron
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-0-and-Remoterig-tp7259442p7313227.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home:
rably improved CW output when I have used
the M1-M4 Message keying vs the paddle/internal keyer. So with the typical
keying output of a PC, from N1MM for example, is there anyway to 'access'
that same message keying 'output'?
Ron/N5QQ
--
View this message in context:
http://elec
I wound up with spare filters if anyone needs a 500hz or 2.7khz filter
for their K3.
Please contact me directly if interested > n5qq61 at gmail dot com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
along with a couple new options installed.
I searched and read the reflector's past comments on the more common
ERR12v causes regarding the circuit breaker lugs and the multipin
connector being tin vs gold, etc. I will check these later when I can
open up radio.
Any comments
I have two K3's on the operating desk that are very similar except in
one way and I can not fine the setting or configuration to correct it.
At present both the rigs are set SPKRS+PH = NO and SPKRS = 1. This
gives me the internal speaker only when headphones are not plugged in,
and then headphones
when I was rearranging the operating layouts.
On Monday, July 25, 2011, Don Wilhelm wrote:
> Ron,
>
> Have you removed the top cover to check that the speaker connector is plugged
> in. If not, that is the first thing I would check.
>
> 73,
> Don W3FPR
>
> On 7/25/201
6 matches
Mail list logo