/Heil mic.
I would like to get 900.00 for it, including shipping.
It works great, I have used it mostly on 17/20/40 and 80 phone.
Please let me know if this sounds fair, and if you know anyone who may be
interested, please spread the word.
-Neil Shubert
AC2O
and I wanted
>> to
>> download it, Looks like it is no longer available!!
>>
>>
>> Sam kf4yox
>>
>> -Original Message-
>> From: Don Wilhelm
>> Sent: Saturday, November 13, 2010 9:01 PM
>> To: Neil Shubert
>> Cc: elecraft
Hi all,
Its been a long time since I tinkered with my K2 and I am getting reports
that I am a few KC's off on 20M
sure enough they sound that way too, so when I tune them in better, I am
about 7-8 Kc off frequency
what should I start looking at?
-Neil
Ac2o
_
Hi All,
should I be worried about taking my K2 where I would take my 857 0r 817?
I really want to but I am more protective of it, its knobs and BNC
connectors
How do they hold up to adventuring?
-Neil
__
Elecraft mailing list
Home: http
Made my first contact wit the K2 tonite on 20 SSB
Greenland! Iota contact
It works!
Now time to upgrade, Thank you all!
-Neil AC2O
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qt
I recently went to Florida with a whole GO kit, inside was 2 radios, 1 power
supply and 1 antenna tuner, they looked at it, asked me what it was, and
wiped it down with swabs and it was ok,
The aluminum flakes in my pocket from the machining done earlier caused more
of a problem.
-Neil
AC2O
On F
all out - tear
> the envelope open if necessary.
>
> 73,
> Don W3FPR
>
> Neil Shubert wrote:
>
>> Hi ALL
>>
>> I got my MH2 mic or the k2 and there was no resistor in the box ACK!
>>
>> I know its a 5.6K Green Blue red, and its a 1/4 watt but is
Hi ALL
I got my MH2 mic or the k2 and there was no resistor in the box ACK!
I know its a 5.6K Green Blue red, and its a 1/4 watt but is there a better
choice?
and should I get a gold or a silver tolerance?
Off to the telephone shack tomorrow
-Neil
he mic jack shell
> is a good step to reducing the possibility of RF feedback, and should be
> done on all K2s with the KSB2 option installed.
>
> 73,
> Don W3FPR
>
>
> Neil Shubert wrote:
>
>> Hi All,
>>
>> I am the proud new owner of a k2, ser# 2676
>
Hi All,
I am the proud new owner of a k2, ser# 2676
I have torn it apart and its been built really well. The only curious thing
is the mic plug is a little wiggly and the 2 threaded standoffs next to the
mic plug do not seem to be attached to anything, other than the board, as if
they are there
Hi All,
going to the Sussex hamfest This weekend, will be looking for a hand
microphone for my K2
I know the sky is the limit and it can be configured for anything. But
seeing as I do not have any at the moment Is there one in particular that I
should look for?
did I just open a can of worms?
-N
problems or what problems I need to expect from a pre-
upgraded radio.
Neil Shubert
AC2O
K2-2676
KSB2 KDSP2 KNB2 KAT2 K160RX
Thanks
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
12 matches
Mail list logo