Re: [Elecraft] Cw Skimmer

I have FiFi SDR RX ( http://www.box73.com/product/3 ) connected to K3 IF output with CW skimmer. Very nice especially in pileups when trying to find where DX is listening. Olli OH6CT > -Alkuperäinen viesti- > Lähettäjä: Elecraft [mailto:elecraft-boun...@mailman.qth.net] Puolesta dw > L

Re: [Elecraft] K3 front panel encoders

I replaced all four encoders ( with help from my friend ) couple of days ago. It was quite a job as the whole front panel has to be taken into pieces and DSP boards has to be taken off. A good SMD rework station is recommended to clean through holes + experience in rework not to damage foils i

[Elecraft] K3 front panel encoders

Has anyone figured out how to clean or fix front panel encoders (SHIFT/LO , HI /WIDTH) ? These cheap ( ~ 0.5$ encoders ) in my K3 has always been quite " jumpy " i.e. value jumps up and down in random steps . Also the" feeling " is not what you would expect form rig in this price range. Simila

Re: [Elecraft] Need a Fuse on the K3's Power Line?

Seems that the final fuse is PCB foil :( Small saving but severe damage .. Olli OH6CT > -Alkuperäinen viesti- > Lähettäjä: elecraft-boun...@mailman.qth.net [mailto:elecraft- > boun...@mailman.qth.net] Puolesta Jarmo Blomster > Lähetetty: 14. kesäkuuta 2013 19:16 > Vastaanottaja: elecraft

Re: [Elecraft] K3 1st mixer mod

I have one I7SWX mixer board available if anyone interested ? Need to remove diplexer components from this unit . ( Early version.) Olli OH6CT > -Alkuperäinen viesti- > Lähettäjä: elecraft-boun...@mailman.qth.net [mailto:elecraft- > boun...@mailman.qth.net] Puolesta Giancarlo Moda > Lähe

Re: [Elecraft] SDR_Sound_Cards

I have pretty much given up my LP-PAN +CW skimmer and NAP3 ever since I upgraded my PC OS from XP to WIN7 ( 64bit ) with AMD X4 Phenom. Tried now two different soundcards Infrasonic Quartet ( did work OK in XP ) and now recently bought EMU 0204 and same " nightmare " continues. Have taken memory

Re: [Elecraft] Could the be the basis for the KPA-1500?

ihe: Re: [Elecraft] Could the be the basis for the KPA-1500? > > Hello Olli, > > It's a start but really needs two devices. > > Any idea what the cost is? > > > > On 7/24/2011 8:07 AM, Olli Tuppurainen wrote: > > Here is one alternative for HF + 6m >

Re: [Elecraft] Could the be the basis for the KPA-1500?

Here is one alternative for HF + 6m http://www.nikkemedia.fi/juma-pa1000/ Olli OH6CT > -Alkuperäinen viesti- > Lähettäjä: elecraft-boun...@mailman.qth.net [mailto:elecraft- > boun...@mailman.qth.net] Puolesta Jack Chomley > Lähetetty: 24. heinäkuuta 2011 6:44 > Vastaanottaja: garyk...@w

Re: [Elecraft] K-3 with High Current Problem on 20 meters

I had the same problem on 10m. My power supply ( 30A max ) had a voltage drop from 13.8V to 12.5V on 100W output. I was instructed by Elecraft to " increase the power supply voltage to 14.0 to 14.5VDC under no load, and make sure the is as direct of connection as possible between the power supply

Re: [Elecraft] Recommended AGC settings for separation of signals in CW pile-ups

I use AGC THR=8, SLP=002 + AGC DCY SOFT. This sound OK with my modest pileups ;) Another issue is if you get someone loud to your zero beat ( or within your roofing filter passband ) then hardware AGC will go up.. Olli OH6CT > -Alkuperäinen viesti- > Lähettäjä: elecraft-boun...@mailman.

Re: [Elecraft] Yamaha CM500

This is what B&H photo web shop is claiming if choose EU destination ( or at least Finland ) " Due to the manufacturer’s restrictions, B&H Photo is unable to ship this item to an international destination: We apologize for any inconvenience this may have caused you. " Olli OH6CT -Alkuperäine

Re: [Elecraft] New K3 Beta Release: APF for CW, "Fast Monitor" & improved TX gate for voice modes

With this release SSB audio with processor on went very rough...also I can hear funny audio artifact ( on TX monitor ) if I whistle to microphone. After reverting to 4.14 everything back to normal. APF was still great :) Olli OH6CT -Alkuperäinen viesti- Lähettäjä: elecraft-boun...@mailm

Re: [Elecraft] K3 MCU 4.17 (APF beta) kills SSB output?

Same thing..with 4.17 beta my SSB output dropped to 50W...reverted back to 4.14 everything is ok. APF was great though ;) Olli OH6CT -Alkuperäinen viesti- Lähettäjä: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] Puolesta Nate Bargmann Lähetetty: 4. marraskuuta

Re: [Elecraft] Roofing filter for CW

One thing to remeber is that if you get strong signal within your roofing filter passband you will notice that AGC will go up to protect DSP overloading. Then you have use for narrower roofing filters. I have 400Hz but considering to add 200Hz after working couple of CW and RTTY contest on 40 mete

Re: [Elecraft] [Elecraft_K3] TX CW discrepancy

What I have noticed is that K3 internal keyer weight changes between VOX and use of footswitch. I tend to press footswitch time to time to prevent amplifier relay sound ( AL1200 relay is loud ) but noticed this bit annoying feature after trying K3 internal keyer instead of microkeyer. The weight

Re: [Elecraft] K3 needs survey -- firmware and application software

I would like to see separate RX EQ setting possibilities for CW and SSB. At least I prefer totally different values in different modes BR and HNY Olli OH6CT > -Alkuperäinen viesti- > Lähettäjä: elecraft-boun...@mailman.qth.net > [mailto:elecraft-boun...@mailman.qth.net] Puolesta Wayne

Re: [Elecraft] K3: AGC Adjustment

I have found so many different adjustment parameters for AGC in K3 that I would apperciate " AGC settings for dummies " type of instructions. :) I previously owned IC-756PRO3 which can be used as reference of well functioning AGC among DSP radios. Very pleasant experience. Olli OH6CT > -Al