[Elecraft] RTTY tail

I'd love to know the secret of defeating the long tail after a rtty transmission. Ive been told to send the prosign IM but it has never worked. Any hints? 73, Steve AA4V __ Elecraft mailing list Home:

[Elecraft] KPA500 duty cycle

Hey, Rich: I've used mine from several places on SSB, CW and RTTY. Flawless performance! Used a THP HK-1.1fx before the Elecraft.not flawless!! 73, Steve AA4V __ Elecraft mailing list Home:

[Elecraft] K3 no power output

Hi, Don: While using K3 (S/N 855) today, the power out of the K3 dropped to '0' in mid-sentence. I was putting out about 50 watts driving an ACOM 2000A. I checked all the obvious things, short of resetting the rig. From the rig straight to a dummy load (by passing the ACOM amp, etc.) there is

[Elecraft] K3 firmware upgrade

I have routinely been able to update software in both K3s in the usual manner. I tried to update to 4.51 today and the latest K3 urility that comes up on the Elecraft site is 1.12.3.28. This utility will not allow me to update to 4.51. I see that Elecraft recommends K3 utility 1.3.9.2 but I can

Re: [Elecraft] K3 firmware upgrade

Hi, Dick: Thanks so much for the quick reply. Of course, I didn't update the info in the cache so it only showed my last upload (4.39). I HATE getting old. Both K3s updated to 4.51...smooth as silk. Is there a list of menu items current through 4.51 or do I just print the software update

[Elecraft] multi/2 with 2 K#s and N1MM

Can anyone give me a thumbnail review of how to use N1MM with 2 K3s in multi/2 (or tell me where to find the info?) 73, Steve AA4V __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

[Elecraft] K3 interface with N1MM

Good Evening, All I'd like to interface my K3 to N1MM. Am I assuming correctly that one needs only connect the rig's RS232 port to a serial port on the computer to get full radio control AND CW sending? If not, an RS232 cable from K3 to computer and LPT1 keying interface from computer to rig?

[Elecraft] Heil Proset adaptor

Which of the Heil Proset (HC5) 8-pin adaptors should be used with the K3? ICOM, Kenwood or Yaesu? If ICOM, should the Heil have an ICOM specific mike (electret)? 73, Steve AA4V patiently waiting in the queue for the THIRD production run. ___

[Elecraft] dual receive with K3

If one purchases two receivers in one K3, can one 'split' dual-receive (one freq in left ear and the other in right ear) ala FT1000D and others? Can it be done with one receiver 'split'? 73, Steve AA4V ___ Elecraft mailing list Post to: