Re: [Elecraft] XV432 Oscillates with Amp connected

Hello Stu2, Some time ago, I had problems with an oscillating (or at the tip of starting self-oscillation) XV432. It manifested in such a way, the XV432 being very sensitive to input power levels and "jumpy" output power when adjusting the power level. Together with a Mirage D1010 (100W 70cm PA)

Re: [Elecraft] K3 needs survey -- firmware and application software

I'd like to see the following enhancement: Currently the transverter offset can be adjusted +/-9.99 kHz. I'd like to have this range extended - maybe to +/- 99kHz. Having an XV432 with stock XTAL + oven, the elevated temperature from the oven pushes the LO quite a bit in frequency. I know that on

[Elecraft] K3: FW issue, XVTR operation & TX power settings

Hi, With latest (MCU 1.88 / DSP 1.70) FW (and also versions sbefore) I have the following strange behavior in transverter operation: K3 SN 533 Using an XV144, set up as XVTR1, 1mW drive power. Tune PWR is set to fixed 5.0 (Config Menu) When I switch to the transverter band and do TAP TUNE, a car