Don and Dave, thanks for the responses. The idea with the ground
contacts is interesting.
Regardless of whether it makes a difference, I will check and clean the
contact surfaces once the next time I open the base plate.
I have not paid attention to this detail before.
73, Wolfgang
DL2KI
x27;t understand the reason behind
this statement.
Therefore my question, of it is really so that "CAL-PLL" must be done
again after *each opening* of the lower housing cover?
Since Peter is SK, I can unfortunately no longer ask him myself.
73, Wolfgang
DL2KI
--
73 de DL2KI
http://w
Hello:
I have built and installed the K60XV 60m and transverter adapter in my
K2. I was using the 8-pin female connector (RF-J13) for my amplifier
keying circuit (N0SS design). As this connector is now used for the
KX60XV I am looking for a way to key an external amplifier.
73s
Wolfgang
but the bandwith is 1.35 KHz. When using
the width control to widen the width the K3 switches to filter slot 1.
It is not possible to use the 2.7 Khz filter in AM receive.
Any suggestions?
73
Wolfgang
dk7cy
__
Elecraft mailing
Hi,
when the 4-band module should not be developed further, it would be a
good idea to publish the firmware so that it might create a "open
source" project???
73, Wolfgang
DL2KI
--
73 de DL2KI
http://www.dl2ki.de
DOK K08
DL-QRP-AG #3247
G-QRPC #13541
Jabber-ID: dl...@jabber.ccc
Sorry, wrong recipient.
73 Wolfgang, DL2KI
--
73 de DL2KI
http://www.dl2ki.de
DOK K41
DL-QRP-AG #3247
G-QRPC #13541
Jabber-ID: dl...@jabber.ccc.de
GnuPG:
Öffentlicher Schlüssel erzeugt am: 2012-10-27
Key-ID: 0xFB3F3B7A
Algorithmus: RSA(4096 Bit)
Fingerprint: 4530 9FCB 9D48 9B50 967C F81C
Moin,
könnte auch sein, das das bei dem 38Special-Filter deshalb so große
Auswirkungen hatte, weil das Filter bereits verstimmt war. Die
Sollfrequenz wird hier sicher schon im abfallenden Bereich des Filters
gelegen haben. Der Abfall über der Sollfrequenz ist dann sicher größer
als -0.8dB.
Dennoc
e are obvious reasons for both choices, so I
am evaluating with option works best for me. Decisions, decisions.
73,
Larry Wolfgang, WR1B
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qt
re that we
have an allocation there (70 something MHz?) The information still seems a bit
sketchy about that. Any ideas? Thanks.
73,
Larry Wolfgang, WR1B
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Wolfgang, WR1B
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email
Hi
current beta firmware 4.51 did show great improvements in WPX CW contest.
When will it be final?
or is there any issue that will be added/changed in the final version?
--
/*73 de*/
/*Wolfgang DK9VZ*/
w...@dk9vz.com <mailto:w...@dk9vz.
I
hit the Tune button again.
73, Larry Wolfgang, WR1B
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hoste
ohh ha
SPAM über den Mailreflektor ...
Bitte die unterschiedlichen Links in besagtem Mail nicht anklicken
/*73 de*/
/*Wolfgang DK9VZ*/
w...@dk9vz.com <mailto:w...@dk9vz.com>
Am 25.04.2011 12:05, schrieb Franz Nieberding:
> http://top-technology.ro/c
"manual" operation times.
Wouldn?t it be possible for the K3 firmware to have different delay time
entries
(for PTT ON and PTT OFF) between using the serial port keying and using the
Key Ports on the back side
(Paddle with the internal Keyer or even with an external keyer)?
____
73 d
Just testing
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support t
Hi Don,
yes possible, but then I would need something as external Interface
Changing the time limits of TX DLY would be easier, at least for me ...
/*73 de*/
/*Wolfgang DK9VZ*/
w...@dk9vz.com <mailto:w...@dk9vz.com>
Am 07.11.2010 19:57, schrieb Don Wilhelm:
> Those who need TX delay
Hi Elecrafters
the option "TX DLY" could be configured between "0" and "20ms" currently.
Maybe thats enough for a small switching SW-Amplifier but it is not enough
for VHF transverter work.
Could it be expanded to at least 100ms or even more?
--
/*73 de*/
/*W
upcoming fw?
--
/*73 de*/
/*Wolfgang DK9VZ*/
w...@dk9vz.com <mailto:w...@dk9vz.com>
<http://dk9vz.com>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mm
(S/N 2702) without KAT3 tuner (but it is already ordered)
and I?m also using the newest beta software v3.30
--
/*73 de*/
/*Wolfgang DK9VZ*/
w...@dk9vz.com <mailto:w...@dk9vz.com>
<http://dk9vz.com>
__
Elecraft mailing list
Home:
pressing a button
on the front panel. The "beep" is much louder on the
recoring than the recorded signals.
Isn?t it possible to disable these keyboard beeps for the line-out jack???
Or is the only possiblity to disable them at all?
--
/*73 de*/
/*Wolfgang DK9VZ*/
w...@dk9vz.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: htt
I brought my K2 along to the N1NW FD site and enjoyed operating with the
Radio Amateur Society of Norwich (CT) club. I tried to get a few of the
other operators to try the K2, but had limited takers. One fellow sat
down and tuned around a bit on 40 m, and commented that it sounded too
quiet between
*/
/*Wolfgang DK9VZ*/
w...@dk9vz.com <mailto:w...@dk9vz.com>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hos
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: htt
before? Any suggestions are welcome.
73's
Wolfgang DK7CY
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/ma
n the CW Get
frequency display that was 100 Hz or more off the CQing station. Maybe
it was just the heat of the competition, but I thought most CW operators
would be better able to tune to zero beat. It would be interesting to
know what rigs the other operators were using. I
ked fine for
the rest of Field Day!
Any ideas on what may have been going on? There were no storms, the air
was dry, the temperature was a bit cool, dropping into the low 60s. For
anyone who worked WB3IOS 1B EPA, thanks for the contact!
73,
Larry Wolfgang, WR1B
__
27 matches
Mail list logo