Sorry for the rather left of field question….
I have a two custom parsers written in C++ and Python respectivly, to perform
callsign matching … all works as expected.
I am now however turning my attention to doing something using Node-Red - and
that means in native mode at least - I may have
t this email list: http://www.qsl.net/donate.html
>> Message delivered to mcqui...@sfu.ca <mailto:mcqui...@sfu.ca>
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> &l
As I see 2022 CQ WPX RTTY, is approaching this weekend (please save the groans,
as I have bit my tongue regarding the slide-rule/RPN trip down memory lane).
Are there any recommended Contest packages for RTTY specifically for
Mac/Elecraft radio’s ? Please feel free to PM me direct if you would
onate.html
>> Message delivered to g4...@g4gnx.com
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth
Whilst I have read that California has been devastated by the horrific fires,
and the world seems a little doomed with CV-19; There has also been signs of
life within the Elecraft mother-ship, with K4 development. I am glad to see
there is some progress for Elecraft, but as I am sitting
So
Dear Brain-Trust,
I currently use RUMLog and/or SkookumLogger for my contest work (K3S
and a Mac)….
I recently tried to work the RTTY Contest, but found the FLDIGI
interface not very smooth, could not get the integration with RUMLog working,
and then found that COCOA-Modem is
I see on my P3 that there is an additional BNC output, which is “un-buffered”….
Is there any way I can use this ?
What actually is in this output I/Q only - or RF
More curious than anything …
Regards
Tim
__
Elecraft mailing
Dear Elecraft brain trust,
My KX3 seems to have an
issue. It will not "boot up". The power on key combination, on the second quick
attempt gets the back-lights to power on, initially at a dim value, which then
drops to a very-dim setting.
Dear Elecraft brain trust,
My KX3 seems to have an
issue. It will not "boot up". The power on key combination, on the second quick
attempt gets the back-lights to power on, initially at a dim value, which then
drops to a very-dim setting.
9 matches
Mail list logo