ider
where exhaust fans need clearance, etc. Sit in front of the "rig",
reach for "knobs", etc. See how the total setup
feels before you start cutting wood
Steve AD0ES
On 09/17/2015 08:57 AM, elecraft-requ...@mailman.qth.net wrote:
From: "Chuck Milam, N9KY&qu
Try flrig, part of the fldigi suite. Be aware that it has (had?) a bug
hat required it to be started after
the rig is powered up. It pools for options on startup, and if the rig
isn't there it doesn't know what
features the rig has.
Steve AD0ES
On 09/11/2015 06:55 PM, ele
Forwarded Message
Subject:Re: Elecraft Digest, Vol 135, Issue 22
Date: Mon, 20 Jul 2015 07:47:56 -0600
From: ad0es
To: elecraft@mailman.qth.net
http://www.lantronix.com/device-networking/embedded-device-servers/xport.html
On 07/19/2015 08:51 PM, elecraft
Hi,
I have a pi with a GPS shield attached that I use to run an NTPD server.
Not having internet access I needed an accurate time source for digital modes.
It has worked out quite well.
Check out:
http://www.satsignal.eu/ntp/Raspberry-Pi-NTP.html
http://blog.retep.org/2012/06/18/getting-gps-to-wor
setup info.
I have been doing extensive work with fldigi/flrig and my k3/mercury sdr, and
have not
seen this problem. Check out:
http://ad0es.net/flprogs/hydra/introduction.html
Steve AD0ES
On Dec 17, 2014, at 6:15 AM, elecraft-requ...@mailman.qth.net wrote:
>
> On Tue, 16 Dec 2014 10:
a short
trip from the outside ground rod to the inside common ground bar...
Steve AD0ES
On Apr 16, 2014, at 8:59 PM, elecraft-requ...@mailman.qth.net wrote:
> If you add ground rods, know that all ground rods should be tied back to
> the Utility ground rod by a large conductor (#6 wire i
n new scans
and compare to old scans to find subtle degradations from weathering, etc.
73,
Steve AD0ES
On Mar 31, 2014, at 10:00 AM, elecraft-requ...@mailman.qth.net wrote:
> The AIM units are popular and highly advertised, sold by a reputable
> distributor, and are quite powerful, but
virtual dipole ant arrays. I didn't see your call for
development week... Anything I can
do in the future let me know.
73
Steve AD0ES
On Mar 3, 2014, at 9:14 AM, elecraft-requ...@mailman.qth.net wrote:
> I suspect HRD does very little testing of the K-line on their own,
> they
If you know of any K3/KX3 issues with HRD 6.1 please grab a copy of the current
Public Beta 2 from the HRD site and test it. If the issue still exists
register at:
http://forums.hrdsoftwarellc.com/forumdisplay.php?169-HRD-6-2-Open-Beta-support
and report it. Lets get as many things fixed as po
confirm proper
practice.
Can I keep the KPA500 plumbed between the K3 and KAT500, but OFF while using
just the K3/KAT500?
73
Steve AD0ES
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
watt FeldHELL
contact from CO to IL on 20m with a simple dipole tossed out my office second
story window.
Steve AD0ES
On Feb 26, 2014, at 10:00 AM, elecraft-requ...@mailman.qth.net wrote:
> Re: [Elecraft] New ham and the KX3
I see that you plan on starting with phone because you are
f above the rigs with monitors on it" is access to
the rigs. Merely swing the monitor
out of the way, no shelf blocking access to the back of the rigs.
Steve AD0ES
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/l
ook well made.
Steve AD0ES
On Jan 20, 2014, at 8:17 AM, elecraft-requ...@mailman.qth.net wrote:
> Re: [Elecraft] KAT500 serial cable
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailma
on either of these receiver
inputs? I eventually will be running a KPA500
full power...
tia,
Steve AD0ES
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
come from the
main rx? I already have the KXV3A
installed, I will be adding the KRX3, along with additional filters for the
main rx.
Steve AD0ES
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
ot;2-microHAM CODEC", etc. every time I replugged the
USB cable. Be sure windows current
id, ie the one mkII router is using, matches the one used by DM780.
Steve AD0ES
__
Elecraft mailing list
Home: http://mailman.qth.net/mailma
s232 port.
It would be much better if I could directly switch the KAT500 via 2/3 digital
bits from the StationMaster.
Anyone have any knowledge of a way to directly control the KAT500 ant port via
digital IO? I understand
that I am asking for a solution that involv
17 matches
Mail list logo