That is correct, I did not make it clear they were operating maritime mobile
(call sign 3G9A/MM) on 40 and 20 CW and ft-8 on 20.
De K4KAY
73
From: garyk9gs [mailto:garyk...@wi.rr.com]
Sent: Tuesday, January 23, 2018 5:31 PM
To: efortner; 'ab2tc'; elecraft@mailman.qth.net
S
It is spotted right now on the cluster. They are working cw on 20 and 40
meters and ft-8 on 14.074.
73 de Earl, K4KAY
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of ab2tc
Sent: Tuesday, January 23, 2018 4:07 PM
To: elecraft@
I agree 100%
Earl, K4KAY
To: elecraft@mailman.qth.net
Subject: [Elecraft] A very desirable capability
Reading Drew's (AF2Z's) comment,
"The single most important feature that would get me to spring for a K4
would be advanced noise abatement controls. I have little idea how the
NR & NB work, bu
If you have to ask, you probably can't afford it.
Earl, K4KAY
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Terry
Schieler
Sent: Thursday, April 20, 2017 3:14 PM
To: 'brian'; elecraft@mailman.qth.net
Subject: Re: [Elecraft] Ground rod through con
I have had a glitch in my software and trying to reconfiger my K3s. The tx
filters got switched in the software some how. I now have the filters sorted
out but doing the wattmeter calibration and cannot get Config WMTR LP to
change to
WMTR HP. The power control will not go past 12 watts. The auto
nothing, so assume my 5 tickets weren't good.
73 Bob W7AVK
On 3/20/2017 4:52 PM, efortner wrote:
> So who won the raffle?
> K4KAY
>
>
> As announced on ths reflector in January, the Midland (TX) Amateur
> Radio Club is raffling an Elecraft K3S 100 watt transceiver with
So who won the raffle?
K4KAY
As announced on ths reflector in January, the Midland (TX) Amateur Radio
Club is raffling an Elecraft K3S 100 watt transceiver with MH2 mic. The
drawing will be held in less than a week on March 18 at the Midland St.
Patrick's Day Hamfest. As of today 262 of a maximu
Test no reply needed.
K4KAY
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help
Stan,
I have built three of the resonant speakers per the QST article. I am using a
K3s and have plenty of audio without an amplifier. The three speakers were all
in the ballpark of 700 Hz. I took a 2 inch coupling and put on the street elbow
and it resonates at about 500 hz. There might be sli
No power output on 17 meters. I was on 17 meters SSB and not getting
response to calls. The red tx light was on but no power output from the
KPA500. I could push the XMIT tune button and get power out but nothing
using the hand microphone. I powered the Amp down and tried again and red TX
li
KPA500 blew both FETS and PA module has been shipped for repairs. I am
trying to use an Ameritron AL-80B amplifier until I get my KPA500 back. My
paddle goes to an external keyer (Navigator) which is plugged into PTT on my
K3s and the key out goes to the PTT input on the Ameritron amp. The paddle
Hi Bill,
At the Shelby Hamfest, 2015 I ordered the entire K-Line, Amp, KAT500, K3s and
Elecraft P3 along with the filters they suggested. I received the shipment in
late September. Took inventory of all parts as they recommended. I started with
the receiver and finished with KPA500 amplifier. I
A little deoxit on the TMP connectors makes them slide in much easier, but
you must make sure they are lined up proper before applying force seat it
fully.
Earl, K4KAY
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Bob
Novas
Sent: Friday, August 0
I purchased one in September of 2015 and SN is 1783.
Earl, K4KAY
-Original Message-
From: Elecraft [On Behalf Of Phil Wheeler
Sent: Tuesday, July 05, 2016 5:25 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] KPA500 age
My KPA500 S/N 19XX arrived in spring of 2014 so, a bit over t
Try using a touchscreen in a light aircraft on a bumpy air day and you will
learn to hate a touch screen.
Earl, K4KAY
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Barry N1EU
Sent: Tuesday, March 29, 2016 10:13 AM
To: Elecraft Reflector
Subject:
And don't forget those rubber shop mats on the floor.
Earl, K4KAY
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Fred
Townsend
Sent: Sunday, January 24, 2016 5:32 AM
To: 'Elecraft Mailing List'
Subject: Re: [Elecraft] Anti Static Bench
Richard I
I would like to know what the continous keydown power output rating is. The
manual talks about ICAS. I know when I get on RTTY I does not take long for
The fans to come up to full speed running 300 watts.
Earl, K4Kay
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.n
I am trying to run RTTY FSK with my elecraft K3s SN 10326 K4KAY Earl. I am
using MMTTY software and Timewave Navagator. It receives well and appears to
be working properly. Every thing looks right on the MMTTY screen and the
PTT, CAT, FSK leds light on the Navigator. The Tx led below the power but
There is a program called Ruftz (google it) and I think it is free that
sends call signs. You choose the speed you want to start at and start the
process. It sends a call sign and you type it
In the box. If you get it right it will increase the speed until you miss a
character or number at which po
every day.
Thanks for the reply.
73, Earl K4KAY
-Original Message-
From: Cady, Fred [mailto:fc...@montana.edu]
Sent: Monday, November 30, 2015 5:47 PM
To: efortner; 'Elecraft Reflector'
Subject: Re: [Elecraft] RF/SQL dual control
Hi Earl,
Check your Config menu SQ MAIN and SQ SU
I don't know what changed but the dual RF/SQL control for main and sub
receiver cuts out at approximately 1 o-clock position just like a wiper not
making contact on a carbon pot for about
1/8 inch movement of either the large or small knob. The radio is only
several months old and I don't think th
I have just installed fldigi on the computer, configured it but do not have
the CAT control working yet. Will work on that later.
In the mean time when I go back to SSB on 20 meters and key the microphone I
get a red TX light and ERR TXF on vfo B. TX arrow points to VFO A
It transmits fine
I am using the same SamLex supply with the K3s Elecraft power cord that came
with the kit. At 100 Watts key down I can just see the voltmeter move maybe
the width of the needle. The readout on the radio does not dim.
Earl, K4KAY
-Original Message-
From: Elecraft [mailto:elecraft-boun...@ma
My Pc has the svga installed when I put the kit together but I do not have a
monitor installed for svga yet. I originally was able to download the
firmware using the usb a/b cable and my computer.
The usb a/b cable is now connected to the K3s usb port and using the
lp-bridge for rig control/ lo
Rich,
Thanks for the explanation. I sure thought I could get FSK keying with the
LP-Bridge but I understand what you are saying. I was using USB SignaLink
with a modification to a FSKit circuit published in QST a few years back for
FSK keying of my Icom Pro III and it worked well. I have used AFSK
>From Earl, K4KAY. I now have lp-bridge running and cat control is working
fine. I have to give credit to my friend Richard, K4KRW for his help.
I am now trying to get MMTTY going and reading other posts about using
transistor to invert the signal etc, to do FSK. I have done this with
Other ri
Test it one more time with a 50 ohm dummy load on the output to make sure
you don't have a problem between your antenna and KPA 500 SO239 output
connector.
73, Earl K4KAY
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of W4GRJ
Sent: Monday, October 1
Elecraft.
Earl, K4KAY
-Original Message-
From: Jerry Moore [mailto:je...@carolinaheli.com] On Behalf Of
ae...@carolinaheli.com
Sent: Friday, October 16, 2015 1:35 PM
To: 'efortner'; elecraft@mailman.qth.net
Subject: RE: [Elecraft] new to list with new K3s
If I understand what you
Hi, I have now finished the kits and have the K3s, KPA 500, P3 and KAT 500
antenna tuner. Have all up and running and working fine.
After getting all this hooked up I find myself without a port for computer
control of the K3s with my logging and cluster control.
I don't use HRD. What is the si
I have also struggled trying to print the config files and it does not work
on print screen with my computer either. I would also like to be able to
print all the settings for my new radio.
Earl, K4KAY
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
Hi Lee,
I finished putting my k3s together last week and with help from Howard at
the Elecraft discovered most of my problems were coming from a bad tcxo. I
also have the sub receiver and want to do diversity receive with
A separate antenna. My sub receiver is working but I cannot receive any
sig
31 matches
Mail list logo