I am using the same SamLex supply with the K3s Elecraft power cord that came with the kit. At 100 Watts key down I can just see the voltmeter move maybe the width of the needle. The readout on the radio does not dim. Earl, K4KAY
-----Original Message----- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Jim Miller Sent: Monday, October 26, 2015 5:09 PM To: Bill Frantz Cc: Elecraft Reflector Subject: Re: [Elecraft] K3 Voltage on TX I was having too much drop with RR as well. I switched to a 1ft line directly to my Samlex 1235M which has been jacked to 14.4v no load. It only moves a few mV when loaded to 20A. IIRC, the cable is now AWG12. jim ab3cv ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to efort...@ctc.net ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com