Re: [Elecraft] Can the K3 make power without activating Key Out?

would drop out? So I guess the correct sequence would be to press TUNE on the KAT500 and then push TUNE on the K3 and the KPA500 would not KEY. Correct? Why not have pushing TUNE on the KAT500 initiate the whole sequence...unkey the KPA, start the TUNE on the K3 and tune? - Chuck, KE9UW

Re: [Elecraft] P3

yes - Chuck, KE9UW -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net

[Elecraft] Dummy Load with integral digital wattmeter

500 watt amp and tuner, so 1000 watts full scale would be perfect.. Too much to ask for. 0-2000 would be acceptable if it had the 3 ranges. Definitely not single range analog meters like MFJ and Palstar have Anyone know of a product like this? Chuck KE9UW - Chuck, KE9UW -- Sent from: http

Re: [Elecraft] Speaker upgrade

on the K3. Turning the AFX on sounds great too. - Chuck, KE9UW -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm

Re: [Elecraft] Elecraft W2 Wattmeter for sale ... needs repair

Tempting, but I already have one. These are expensive or I'd bid on it for fun too. Should be an easy fix...maybe. - Chuck, KE9UW -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home: http

Re: [Elecraft] Elecraft Digest, Vol 204, Issue 6

I ordered a supply of the various screws at Elecraft just to have them at hand incase one got away from me. Also I can replace one that gets accidently worn a bit. - Chuck, KE9UW -- Sent from: http://elecraft.365791.n2.nabble.com

Re: [Elecraft] K2 upgrade notes not found on Elecraft site...

upgrades. Only the last firmware upgrade lists the details for that upgrade. And it’s not easy to find...I forget where I saw it as I write this. - Chuck, KE9UW -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list

Re: [Elecraft] Difference between a K3 and a K3S

swapped the digital voice recorder. So I was trying to be somewhat frugal. - Chuck, KE9UW -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http

Re: [Elecraft] K4 specs

Page 40 is blank. Says (In Progress) - Chuck, KE9UW -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post

Re: [Elecraft] K4 Reports

I have a question. How do you plug an early K Pod into a K4. Is there an RJ plug to USB adapter and where/which USB socket do you plug it into on the K4. - Chuck, KE9UW -- Sent from: http://elecraft.365791.n2.nabble.com

Re: [Elecraft] CONFIG PTT-KEY Parameter

I'll try these diagnostic ideas when it happens...it is pretty intermittant. Thanks for the ideas. I hadn't thought about the computer hookup. - Chuck, KE9UW -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing

Re: [Elecraft] K2 Hum seems to be sorted

I had that with a TenTec Omni when I placed the speaker/power supply next to it - Chuck, KE9UW -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft

Re: [Elecraft] OT a bit: K3 Ant Tuner

Why the ferrite core? Isn't that the source of the loss? - Chuck, KE9UW -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http

[Elecraft] Installing KBPF3MDKT MOD FOR LOW FREQ CUTOFF

the KSYN3A and Fred Cady not require it for this band pass filter mod? Anybody have insight on this? ----- Chuck, KE9UW -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailma

Re: [Elecraft] Migrating a KPA3 POWER module to a K3S

In that the KPA3A has more pins carrying power, would an older K3 benefit from a KPA3A? Are the pins already there and useable in the old K3? - Chuck, KE9UW -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing

Re: [Elecraft] K3 internal connectors

of the K3 to power the K POD. None of this is mandatory. The cost of these updates would cost about $1100 in parts kits. - Chuck, KE9UW -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home: http

Re: [Elecraft] Kpod data cable

Read page 19 of the pod owners manual which says have no connection to pin #1 and be sure that if you only remove the pin #1 connection at one end, be sure that end is plugged into the K3(s). - Chuck, KE9UW -- Sent from: http://elecraft.365791.n2.nabble.com

Re: [Elecraft] Who would spend 30 hours+ building an Elecraft K2? (plus: special pricing)

it seems like an old friend. - Chuck, KE9UW -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft

Re: [Elecraft] Who would spend 30 hours+ building an Elecraft K2? (plus: special pricing)

it seems like an old friend. - Chuck, KE9UW -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post

Re: [Elecraft] The case of the deaf P3

That cable supplied with the early P3 was a known troublesome cable. Best replaced. - Chuck, KE9UW -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft

Re: [Elecraft] Antistatic Silicon Mat?

Silicon is great, doesn’t melt if you drop hot solder on it. - Chuck, KE9UW -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http

Re: [Elecraft] Win4K3 changes settings on my stuff...

, Chuck ke9uw - Chuck, KE9UW -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft

[Elecraft] Win4K3 changes settings on my stuff...

suggestions? Chuck KE9UW - Chuck, KE9UW -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft

Re: [Elecraft] MH3 rattle?

Mine doesn't rattle. It comes apart fairly easily to check why. - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/MH3-rattle-tp7631577p7631648.html Sent from the Elecraft mailing list archive at Nabble.com

[Elecraft] K3 Display is Dated...

I was wondering if the K3 display could be replaced by an updated display, one that looks like the ones on the newest rigs from Japan. Could it be displayed on the monitor connected to the svga on P3? Just wondering :) - Chuck, KE9UW -- View this message in context: http://elecraft.365791

Re: [Elecraft] K3/K3s Macro Book

Macro book? Where is it available? - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-K3s-Macro-Book-tp7630321p7630367.html Sent from the Elecraft mailing list archive at Nabble.com

Re: [Elecraft] Upgraded KAT3A and KPA3A?

Thanks to the replies, I remember now some of the differences. Thanks for the FAQ. Looks like I might as well get a new radio if I am getting a new radio :) - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/Upgraded-KAT3A-and-KPA3A-tp7630094p7630104.html

[Elecraft] Upgraded KAT3A and KPA3A?

I was thinking of buying a K3s and making my original K3 a qrp rig. Maybe selling it. Is there any reason to buy the new KPA3A and KAT2A instead of moving the original KPA3 and KAT3 into the new K3s? Are the A versions different? - Chuck, KE9UW -- View this message in context: http

Re: [Elecraft] New Firmware (k3fw5r57) Causes Odd Sound

Could be. I don't have the new synthesizers but the noise is there they say. And just cannot be heard because of the higher phase noise. Maybe my phase noise is low or my fan electrical noise is high. Thanks for the tip. Chuck Hawley c-haw...@illinois.edu Amateur Radio, KE9UW aka Jack, BMW

Re: [Elecraft] New Firmware (k3fw5r57) Causes Odd Sound

attle". Maybe I always needed to have the TX GATE set to ON. I don't have any noise in the room, fans or anything, kind of wondered about magnetic noise in the Shure 57 mic from all these monitors, wifi, etc. around here that you can't hear with human ears. - Chuck, KE9UW -- View this messa

Re: [Elecraft] New Firmware (k3fw5r57) Causes Odd Sound

and hard to notice by the casual, I won't worry about it, but thought that it was worth mentioning as an unwanted artifact of r57. And I don't know which portion of the newest firmware is causing it, the MCU, FPF, or DSP1,2. - Chuck, KE9UW -- View this message in context: http://elecraft.365791

Re: [Elecraft] New Firmware (k3fw5r57) Causes Odd Sound

of it, you hear it routinely. It's not a deal breaker, just an anomaly that might be explained and eliminated by the firmware guys. - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/New-Firmware-k3fw5r57-Causes-Odd-Sound-tp7627264p7627272.html Sent from

Re: [Elecraft] New Firmware (k3fw5r57) Causes Odd Sound

Right forgot to say...this is on the 4K serial numbered K3 with all options included. - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/New-Firmware-k3fw5r57-Causes-Odd-Sound-tp7627264p7627267.html Sent from the Elecraft mailing list archive at Nabble.com

[Elecraft] New Firmware (k3fw5r57) Causes Odd Sound

and the issue was gone. Anybody have any ideas? Elecraft? Chuck, KE9UW - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/New-Firmware-k3fw5r57-Causes-Odd-Sound-tp7627264.html Sent from the Elecraft mailing list archive at Nabble.com

Re: [Elecraft] K2 Internal Battery

Wouldn't other chemistry require a different charging consideration? - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/K2-Internal-Battery-tp7627088p7627092.html Sent from the Elecraft mailing list archive at Nabble.com

Re: [Elecraft] SVGA monitor for P3

Well...the whole idea of the SVGA option is to have a simple big screen. I'm using an ACER S202HL monitor. 20 inch. Works well...no computer, sound card, dodads, or other stuff involved. Two wires, power and video cable. - Chuck, KE9UW -- View this message in context: http://elecraft

Re: [Elecraft] K3S Fundraiser.

Completed listings on Ebay show selling prices of from $800 to $1100 depending probably on filters, extras, and marketing skill :). - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/K3S-Fundraiser-tp7624073p7624091.html Sent from the Elecraft mailing list

Re: [Elecraft] K3 - static discharge

I have a (high quality=$50 or so) antistatic mat on my desk. Slower discharge. No issues with sparks in the winter. It makes a nice surface as well. - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-static-discharge-tp7623918p7623941.html Sent from

Re: [Elecraft] KAT500 with KX3

You need the Paula Keezer KX3 band decoder. Makes the KX3 look like a K3 for the purpose. http://www.nx1p.net/what-is-a-kx3-band-decoder/ - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/KAT500-with-KX3-tp7617615p7617672.html Sent from the Elecraft

Re: [Elecraft] Power pins on P3

I jumper 2 and 3. You can still turn off the P3 if desired but when power is applied from the K3 or elsewhere, the P3 automatically turns on. Best of both. - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/Power-pins-on-P3-tp7616432p7616463.html Sent from

Re: [Elecraft] K3S audio board for K3 upgrade?

operate, physical hearing anomalies, etc. that audio reviews are just about useless. - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/K3S-audio-board-for-K3-upgrade-tp7615346p7615445.html Sent from the Elecraft mailing list archive at Nabble.com

Re: [Elecraft] Stereo Speaker for K3

for speech. ----- Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/Stereo-Speaker-for-K3-tp7610618p7610734.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list

Re: [Elecraft] Microphone Qusestion

As best I can tell from the schematics, 7 and 8 are connected together. However I use 7 as mic ground and 8 as the shell, like Kenwood. - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/Microphone-Qusestion-tp7604628p7604689.html Sent from the Elecraft

Re: [Elecraft] Microphone Qusestion

-4ibyL6MxBDxCHbuqOBlbl_K1oh3QFQm=Odk52Hj43c0fw3PqDY789vO-8a9LbCw0pNbI6ROwxIos=kKSYk2tRQLoRNEbS6aLwUwGN2I7rbrlBOSnKO8FQ380e= - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/Microphone-Qusestion-tp7604628p7604674.html Sent from the Elecraft mailing list archive

Re: [Elecraft] KBPF3 upgrade kit and instructions [Corrected]

Yes, but in my case, I remember any mods already done since my K3 was built. - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/KBPF3-upgrade-kit-and-instructions-Corrected-tp7604292p7604306.html Sent from the Elecraft mailing list archive at Nabble.com

Re: [Elecraft] KBPF3 upgrade kit and instructions [Corrected]

long for an interactive link on the Elecraft site that I can just enter my K3 serial number into and it displays all the upgrades that I could benefit from and why. - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/KBPF3-upgrade-kit-and-instructions-Corrected

Re: [Elecraft] KX1 Power Output

=vLL9glvPEFUTQSqhVPEQ4JvH-_d_bCJGumtAFOEcNTks=9h4tIWBRnwg1N9Bql8aaJCKATmx8GoXpNoG7w-IINoQe= - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/KX1-Power-Output-tp7604063p7604072.html Sent from the Elecraft mailing list archive at Nabble.com

Re: [Elecraft] MH3 Microphone Freq Response Improvement

-253Aemail.namld=AwMCAgc=8hUWFZcy2Z-Za5rBPlktOQr=sJF6P5kPtoOq-4ibyL6MxBDxCHbuqOBlbl_K1oh3QFQm=ddCyliSALnfkpfciNQ9iIkECa_XJWQzQBwU_yBz0XxIs=O-EoTGQRqaBtPj22MzHCpZnpwKzx-MnZupWTlREpyJce= - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/MH3-Microphone-Freq-Response

Re: [Elecraft] New K3/K3S Beta Firmware, rev. 5.26: Support for K3S and upgraded modules

As for the K3, updates will continue to be for both, I think, and it's worth checking to make sure the K3 doesn't suffer because of the specific K3S additions or changes...even if the update does not add anything for the K3. - Chuck, KE9UW -- View this message in context: http://elecraft

Re: [Elecraft] Dayton 2015 - Something new coming

O...I know... The clock is off by two days... - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/Dayton-2015-Something-new-coming-tp7602581p7602647.html Sent from the Elecraft mailing list archive at Nabble.com

[Elecraft] Odd WWV and K3 frequency issue...

the K3's guts as well as I should. - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/Odd-WWV-and-K3-frequency-issue-tp7596086.html Sent from the Elecraft mailing list archive at Nabble.com

Re: [Elecraft] Strange K3 KPA500 Issues fixed with a longer coax cable?

I read the longer cable response, I thought that it's just a change to the RF getting into something. If it is more inductance that helps, then what effect does RF Ferrite clipped onto a short coax have? Just a thought. - Chuck, KE9UW -- View this message in context: http://elecraft.365791

Re: [Elecraft] [KXPA100] Power-on slide switch ?

issues with them. EE's don't know everything...well almost, but not about slide switches :). - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/KXPA100-Power-on-slide-switch-tp7590470p7590528.html Sent from the Elecraft mailing list archive at Nabble.com

Re: [Elecraft] Problems with erratic USB/serial connection

I bought a couple refurbished Edgeport 4 port serial to usb converters. Around $40 to $60 each. They installed, or the Win 8 installed them without fanfare, and they work well. Enough ports for the entire K line with a couple left over. - Chuck, KE9UW -- View this message in context: http

Re: [Elecraft] KAT500 TUNER WOES

pointed out by Elecraft that the tuner values in the K3 ATU and the KAT500 are the same. Changing the length of the feedline sounds like a plan. - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/KAT500-TUNER-WOES-tp7589315p7589344.html Sent from

Re: [Elecraft] K2 #6951 It's Alive!

on the forums... - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/K2-6951-It-s-Alive-tp7589195p7589286.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http

Re: [Elecraft] K2 #6951 It's Alive!

installed in favor of a newer one that I ordered also. It all worked when done! All the options installed but the 2M and the 100 watts. - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/K2-6951-It-s-Alive-tp7589195p7589231.html Sent from the Elecraft

Re: [Elecraft] Fake FTDI chips

Chairman K5EWJ Trustee N5BPS, USS Cavalla, USS Stewart There may be some companies with the old Lenovos (Think Pad) about 1.5 thick that are being replaced. I don't know where buy maybe you can find some. Maybe eBay if the resellers have them. - Chuck, KE9UW -- View this message in context

Re: [Elecraft] Anti Static Mats

http://en.wikipedia.org/wiki/Antistatic_agent - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/Anti-Static-Mats-tp7586727p7587021.html Sent from the Elecraft mailing list archive at Nabble.com

Re: [Elecraft] Anti Static Mats

| the mouth-breathers, and that's why we're | powerful! #include lt;disclaimer/favouritegt; | --Chris Hardwick - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/Anti-Static-Mats-tp7586727p7586918.html Sent from

Re: [Elecraft] New KX3 Accessory

and I would want to get them with the PX3 included in the same shipping cost :). Not a big deal, just sayin'. Also, I am an accessory guy...I like to look thru the accessories and see which ones I may ever need. Listening E guys? Big margin on those items and I like them. - Chuck, KE9UW

Re: [Elecraft] New Elecraft product to be shown and announced this Friday

...or it could be like other manufacturers who come out with an improved model while adding a couple of new model number digits making your current rig obsolete. - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/New-Elecraft-product-to-be-shown

Re: [Elecraft] New Elecraft product to be shown and announced this Friday

That's what I meant if I was unclear. - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/New-Elecraft-product-to-be-shown-and-announced-this-Friday-tp7586452p7586539.html Sent from the Elecraft mailing list archive at Nabble.com

Re: [Elecraft] K3/KPA500/KAT500 revs 4.83/1.38/1.58

Well that must be the result of what Jack said about loading the aux buss if the KAT is off when you turn on the K3. - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-KPA500-KAT500-revs-4-83-1-38-1-58-tp7584490p7584600.html Sent from the Elecraft

Re: [Elecraft] K3/KPA500/KAT500 revs 4.83/1.38/1.58

My KAT goes on with the bench power supply. Then I turn on the K3 and the the KPA. - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-KPA500-KAT500-revs-4-83-1-38-1-58-tp7584490p7584553.html Sent from the Elecraft mailing list archive at Nabble.com

Re: [Elecraft] K3/KPA500/KAT500 revs 4.83/1.38/1.58

worked well. Forgot about that...not a problem, but don't know why it did that. - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-KPA500-KAT500-revs-4-83-1-38-1-58-tp7584490p7584507.html Sent from the Elecraft mailing list archive at Nabble.com

Re: [Elecraft] Please test KPA500 rev. 1.38 if you get a chance

I'm good with 1.38 also. - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/Please-test-KPA500-rev-1-38-if-you-get-a-chance-tp7584382p7584480.html Sent from the Elecraft mailing list archive at Nabble.com

Re: [Elecraft] [Elecraft_K3] New K3/KPA500/KAT500 beta firmware: KAT500 tracking of K3 VFO other improvements

My K3-KPA-KAT works great with all three betas and a new Windows utility for KPA. Two solid days and no retuning or faults when I get too into the mic. Thanks Elecraft for all the great help and continuing support. - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2

Re: [Elecraft] K3 to KAT500

, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-to-KAT500-tp7583270p7583422.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman

Re: [Elecraft] K3 to KAT500

I've had that retuning happen, but I think it's when I get into the mic and flat top or whatever. Maybe too much mic gain...not sure. But it is annoying. - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-to-KAT500-tp7583270p7583315.html Sent from

Re: [Elecraft] KAT500

I stand corrected. Must have thought that was the answer when I danced around the necessary value on the KAT500 when the KAT3 zeroed right in for a low SWR. Sorry, and thanks for the correction. - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/KAT500

Re: [Elecraft] KAT500

The reason is that the KAT500 has more coarse component values... the values of capacitance for example are not as fine as on the K3. So the values on the K3 sometimes cannot be duplicated on the KAT500. - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com

Re: [Elecraft] SSB Net

When the band is out, it's out. You could organize an alternate band if conditions are poor on the primary one. - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/SSB-Net-tp7577628p7577646.html Sent from the Elecraft mailing list archive at Nabble.com

Re: [Elecraft] KAT500 production firmware version updated to 1.41

I did, copied both files to a directory I named KAT500fw0141...pointed to it, works fine, looks like the ones the zip versions did. - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/KAT500-production-firmware-version-updated-to-1-41-tp7577412p7577461.html

Re: [Elecraft] KAT500 vs K3 ATU

since both tuners display their values when tuned (or are unsatisfactory tuned). - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/KAT500-vs-K3-ATU-tp7577381p7577417.html Sent from the Elecraft mailing list archive at Nabble.com

Re: [Elecraft] KAT500 Kit Shipping Status

I just got and built #472. Ordered the kit in the third week of October. Works great. No problems, all the parts shipped except the wrong computer cable. But will rectify soon I imagine. Chuck, KE9UW - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com

Re: [Elecraft] K3, A calibration question

At 100 watts according to the K3, with 12.6 vdc (drops down from 13.8 vdc with key down CW) I get 19.5 adc according to the Hamsource EZ-meter. - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-A-calibration-question-tp7567680p7567704.html Sent from

Re: [Elecraft] [KAT500] Help with KeyLine Interrupt on KPA500 (Video)

watts default). While that would not hurt the KAP500, some other amps would be damaged if the key line was to be opened when they are producing full power. The KAT500 manual is on line and addresses the use of other than Elecraft amps. - Chuck, KE9UW -- View this message in context: http

Re: [Elecraft] [KAT500] Help with KeyLine Interrupt on KPA500 (Video)

watts default). While that would not hurt the KAP500, some other amps would be damaged if the key line was to be opened when they are producing full power. The KAT500 manual is on line and addresses the use of other than Elecraft amps. - Chuck, KE9UW -- View this message in context: http

Re: [Elecraft] [KAT500] Help with KeyLine Interrupt on KPA500 (Video)

it doesn't Fault giving the KAT time to open the key line. So the change in firmware we are waiting on is for the KPA amp. Help me if I'm missing something here. - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/KAT500-Help-with-KeyLine-Interrupt-on-KPA500-Video

[Elecraft] KAT500 L and C value limits?

Can anyone tell me what the range/size of the L and C values are? - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/KAT500-L-and-C-value-limits-tp7565948.html Sent from the Elecraft mailing list archive at Nabble.com

Re: [Elecraft] KX3 Operating Tip: Using the KXPD3 attached paddle as a hand key

, but a few spare parts would be good to have. Can we expect a parts list sometime on the paddle? - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/KX3-Operating-Tip-Using-the-KXPD3-attached-paddle-as-a-hand-key-tp7557452p7564451.html Sent from the Elecraft mailing

Re: [Elecraft] KAT500

not asking if it's in the works, just if it can be done in future programming by Elecraft. Any ideas? Chuck, KE9UW - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/KAT500-tp7558017p7561347.html Sent from the Elecraft mailing list archive at Nabble.com

Re: [Elecraft] heil mic adaptor

http://www.gigaparts.com/store.php?action=profilesku=ZHL-CC-1-XLR-K $35.00 - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/heil-mic-adaptor-tp7559675p7559728.html Sent from the Elecraft mailing list archive at Nabble.com

[Elecraft] KX1 battery holder screws too short!

, but frustrating finding suitable 2-56 screws...any one like to try finding them at your local Best Hardware store? 4-40, yes, 2-56 no! - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/KX1-battery-holder-screws-too-short-tp7557213.html Sent from the Elecraft mailing

[Elecraft] KX1 ATU causes power to drop off...

, but cycling thru C1 thru C3, the SWR seems to just change from 2.0 to 2.1 to 2.0 Not sure what to look at... - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/KX1-ATU-causes-power-to-drop-off-tp7557109.html Sent from the Elecraft mailing list archive

Re: [Elecraft] KX1 ATU causes power to drop off...

Oh and the ATU is in the CAL (bypass) mode. Of course it is in the TUN mode for the testing of inserting different L and C elements and noting SWR changes to see that all the elements are working. - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/KX1-ATU

[Elecraft] Building 3080 first...then KX1

the mods during that time and incorporated them into the 2000 year vintage K1 which worked when finished. I had bought two firmwear chips before i ever turned it on the first time. The KX1 is not as big a job. Comments? Chuck, KE9UW - Chuck, KE9UW -- View this message in context: http://elecraft

Re: [Elecraft] [k3] fw 4.48 download

I can not download it either. I am using the latest utility, etc. Seems to be removed from the ftp directory. - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/k3-fw-4-48-download-tp7484488p7489597.html Sent from the Elecraft mailing list archive

Re: [Elecraft] KAT-500

, that the values could be read out in the future? - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/KAT-500-tp7412472p7418163.html Sent from the Elecraft mailing list archive at Nabble.com

[Elecraft] UPDATE!! Re: KPA has FAILED...high SWR reported by K3 when amp in Operate

, Chuck, KE9UW - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/KPA-has-FAILED-high-SWR-reported-by-K3-when-amp-in-Operate-tp7371793p7386967.html Sent from the Elecraft mailing list archive at Nabble.com

Re: [Elecraft] KPA has FAILED...high SWR reported by K3 when amp in Operate

Excellent response from service with an RF unit on the way...appeared not to be switching into the transmit mode when in operate. - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/KPA-has-FAILED-high-SWR-reported-by-K3-when-amp-in-Operate-tp7371793p7377011

[Elecraft] KPA has FAILED...high SWR reported by K3 when amp in Operate

My KPA500 causes a high SWR showing at the K3 when the amp is in transmit operate. All else seems to work ok...reloaded firmware...checked faults...something about power lost without controlled shutdown. Any ideas? Pin diode? - Chuck, KE9UW -- View this message in context: http://elecraft

[Elecraft] KPA500 audio muffled?

there was some discussion of setting the bias current here, but I can't find it again. What is the range of bias current for best linearity? I don't see any help in the manual. - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/KPA500-audio-muffled

Re: [Elecraft] KPA500 audio muffled?

at about 0.4 A. - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/KPA500-audio-muffled-tp6996649p6996722.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home

Re: [Elecraft] KPA500 audio muffled?

noticed. And the correlation with higher power is obvious. I think there is also some transistors just don't sound good...get yourself a four by one and do some real QRO. I am aware of that bias as well. I really like this KPA500 amp. - Chuck, KE9UW -- View this message in context: http

[Elecraft] Do Utilities work with Lion?

Wondering if it's safe to upgrade to Lion. - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/Do-Utilities-work-with-Lion-tp6909480p6909480.html Sent from the Elecraft mailing list archive at Nabble.com

Re: [Elecraft] My KPA500 has no 270v

Go here for a schematic... http://www.worldwidedx.com/amplifiers/96435-elecraft-kpa500-high-frequency-amplifier-manual-schematics.html Chuck, KE9UW - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/My-KPA500-has-no-270v-tp6897042p6897755.html Sent from

Re: [Elecraft] Serial #5887 - Delivered Today

You have to remove the sub to install them... I pretty much knew what I wanted after decades of ham radio so I just bought the 8 pole ones and put them in right away. - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/Serial-5887-Delivered-Today

Re: [Elecraft] KPA-500

Output - Chuck, KE9UW -- View this message in context: http://elecraft.365791.n2.nabble.com/KPA-500-tp6844485p6845946.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http

  1   2   >