retried FAA electronic tech, I have fixed by far more by repluging or
reseating a card or connector on multi million dollar equipment
than part replacement.
leroy AB7CE
-Original Message-
From: N4ZR
Sent: Thursday, June 10, 2021 9:22 AM
To: elecraft@mailman.qth.net
Subject: Re:
The old boy Ben Franklin invented the lightning rod, and it uses a spark
gap to ground.
I over ground from my FAA training. Under the 6 foot concrete cube for my
tower is 10 foot copper
rod with welded ground cable that goes 30 feet up the tower to a large
ground clamp, for one.
Both of
Well you saved up some fun for later. I have with exception of the 1500w amp
and k4, I have everthing else.
Whoops, I do need a 2 Meter Xverter, have the 6 meter one.
Still great fun with K2. The receive works side by side equal with my K3S.
And having built all the options, it’s a high
DC to DC is used in video and RF frequency, over 50 years I know of,all the
time to get away from 60hz and other design nonlinearities.
Retired NIST DC to 18GHz lab tech
AB7CE Roy
-Original Message-
From: Dr. William J. Schmidt
Sent: Monday, September 14, 2020 10:05 AM
To:
Hi Ed, Probably the only option I did not do on the K3S was that. I do have
it on my KX3 and the K2 drives a nice transverter if the sudden need arises.
73 AB7CE
-Original Message-
From: Edward via Elecraft
Sent: Wednesday, August 19, 2020 7:56 AM
To: elecraft@mailman.qth.net
I installed a N0SS (much missed silent key)
zero beat indicator, works excellent. I put one in my K1 and K2 also.
leroy AB7CE
-Original Message-
From: Kelly Breed
Sent: Sunday, June 07, 2020 3:00 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Zero-beating a KX1
I recently
I also retired from FAA. Maybe the Air Defense Long Range ARSR 4 RADARs ,
BI-6, MODE-S and dozens of other 24/7 sytems, are not "critical systems".
Power supply issues were rare. Some of the most robust supplies I have ever
experienced.
Every ham shack I have ever seen has at least one bad
Good to learn something from you today Don,
Thanks 73, Leroy AB7CE
-Original Message-
From: Don Wilhelm
Sent: Tuesday, March 31, 2020 9:36 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 SSB filters
Hopefully that we will remember that the DSP filter skirts are steeper
The FAA still uses 13.6 volt AM around the world, even the Western air
defense com is same.
The Huge power UPS legacy sytems are part of the same old standard that
won't die.
leroy ab7ce
On 11/4/2019 1:24 PM, Rick Bates (WA6NHC) wrote:
Perhaps since that is the standard voltage for
So true
-Original Message-
From: Walter Underwood
Sent: Tuesday, August 20, 2019 12:38 PM
To: Elecraft List
Subject: Re: [Elecraft] KX4 Features ??
This was my only disappointment with the KX3. They couldn’t find a low-noise
USB chip, but the rat’s nest of cables still drives me
My KX3 is such a kickass radio, Its slow for me to think of upgrades not
already done.
For some reason KX4 sounds wonderful. Maybe full vhf/uhf? Some of that K4
tech?
I think I already want one!
Leroy
AB7CE
-Original Message-
From: Doug Hensley
Sent: Tuesday, August 20, 2019 10:55
The K1 is as remarkable as the K2, for its small rugged box, it’s a power
house feature packed rig.
Gotta say its been in its case since I got the KX2. Remarkable rig.
Leroy AB7CE
-Original Message-
From: Lane
Sent: Thursday, June 06, 2019 7:50 PM
To: Fred Jensen
Cc:
A DAYTIME METEOR SHOWER IS UNDERWAY: Radars in the northern hemisphere are
pinging with activity as one of the strongest meteor showers of the year takes
place in broad daylight. The source of the shower is sungrazing Comet
96P/Machholz. Although the meteors are emerging from a radiant point
To: lmarion
Cc: Elecraft Reflector
Subject: Re: [Elecraft] MFJ1234
Curious, does this also turn the radio on and off on either of those?
Sincerely, Frank Krozel t: 1-630-924-1600 fr...@electronicinstrument.com
BSEE, AASEET, FCC Lic.# PG-18-19178, KG9H
Electronic Instrument Associates
If you get the RigPi make sure you order from MFJ so you can get a correct
cable for the K3s and a different one for KX3.
Its being sold as a “complete kit, all you need is your rig”, by some. Not
true.
Also be aware its pretty much plug and play on my Apple tablet. Windows takes
several
I received a MFJ1234 RigPi this morning. Can control The K3S, but but still no
audio. Connected the provided audio cable to the speaker and line out jacks,
nothing.
trouble shooting in the help files says to click on the speaker on the RSS
display.
There is no speaker on my RSS display.
Will you be able to remote operate with an app?
Leroy AB7CE
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted
20 plus years ago I slung some wire in a tree with a fishing pole at Yellow
Stone Park and hooked it to a QRP Sierra. Was trying to activate scarce
Wyoming and the park. The only call I got on my CQs was N6KR.
That's another one
of those
Been building/home brewing since I was 11.
K2 sn40 was the most fun radio building experience of my life, with K1, KX1
,KX2, KX3 and others being the frosting on the cake.
K2 still monitors 6 meters with the transverter , as the K3S is in the
main position now, where Wayne's Sierra was
SSB/CW is all I have ever used. I have 41 logged SSB MS with 24 cards for
some of those.
Leroy AB7CE
-Original Message-
From: Wes Stewart
Sent: Wednesday, December 05, 2018 12:44 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] 6m meteor scatter
Why not just use CW (or even
Hi Ted,
Our magnetic field is reversing and collapsing, cosmic rays are up, and
solar radiation is not being buffeted off as much. It might be a wild ride
for ham radio.
Leroy AB7CE
-Original Message-
From: Dauer, Edward
Sent: Tuesday, August 21, 2018 7:49 PM
To:
I have pointed my six element into aurora and bounced to other hams doing
the same thing. And bounced off of meteor scatter. I do not all the physics,
but I think ionized gas is our friend.
Leroy AB7CE
-Original Message-
From: Dauer, Edward
Sent: Tuesday, August 21, 2018 7:49 PM
To:
NIST went GPS long before I retired.The Cesium and Rubidium Clocks I
calibrated for Space Command had to degrade the accuracy requirements from
10 to the -12 to 10 to -10 to accommodate GPS . Made no real difference to
the end users at the time.
Leroy AB7CE
-Original Message-
Those of us who study solar physics actually view the 11 years as half of
the 22 years it takes for the magnetic cycle to complete.
A peak or minimum is not a complete cycle.
73
Leroy AB7CE
-Original Message-
From: Dauer, Edward
Sent: Saturday, July 21, 2018 4:47 PM
To:
Congratulations!
It is as you say, I feel as if I own ham radio history.
Once Elecraft started they have been my ham radio experience.
Building K2 S/N 40 all options was the peak of my ham radio experience so
far.
I am saying that with the K3S and full 500 watt K-line on the desk.
I probably
There is a Canadian Ham on the magnetic loop list who makes first class
butterfly caps(you assemble) less than $100 to my home.
Leroy AB7CE
-Original Message-
From: ANDY DURBIN
Sent: Sunday, June 17, 2018 11:02 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] OT - Source for Air
So I have the K3s TCXO, and no P3 drift. Are they not related?
73 Leroy AB7CE
-Original Message-
From: Vic Rosenthal
Sent: Saturday, December 09, 2017 3:44 AM
To: Elecraft Reflector
Subject: [Elecraft] P3 drift
My K3 seems quite stable (at least for CW purposes) although I don’t
You are so very correct. If you are not using the diversity capability of
the K3s, you are really missing out.
Leroy AB7CE
-Original Message-
From: Bill Johnson
Sent: Wednesday, November 22, 2017 3:57 PM
To: g...@ka1j.com ; Elecraft@mailman.qth.net
Subject: Re: [Elecraft] [K3] DUAL
I get no diversity benefit from using the same antenna. I get huge results
using a full wave 160mtr loop, and a sloper antenna.
Leroy AB7CE
-Original Message-
From: Yngvi (TF3Y)
Sent: Monday, November 06, 2017 8:47 AM
To: Jim Miller
Cc: Elecraft Reflector
Subject: Re: [Elecraft]
Last I knew of you ,some many years ago now, you were retiring from Montana
Power. What is NBS?
-Original Message-
From: Ken G Kopp
Sent: Sunday, October 29, 2017 4:50 PM
To: Elecraft
Subject: [Elecraft] Babies at play as seen on the P3
Do a Google search for "Digisonde" for
ecraft units do. (;-)
73
K0PP
On Oct 29, 2017 14:05, "lmarion" <lmar...@mt.net> wrote:
the ones I can't figure out are the key down and then sweep across the
band with their VFO knob. I have bee seeing them since I had a soft rock
pan display and now on the P3. They a
the ones I can't figure out are the key down and then sweep across the band
with their VFO knob. I have bee seeing them since I had a soft rock pan
display and now on the P3. They are almost continuous. they stop
occasionally to QRM a QSO and then keep going.
Leroy AB7CE
-Original
I have been trying along time to get buyers to go for it and get the sub rx
for its many pluses. One that is kind of not obvious is the diversity
receive. I knew about it from my years of working on FAA radars, and
military search RADARs maintained by the FAA. All search radars from way
back
Yes the tuners are great, and my 160 mtr full wave loop makes a good 6mtr
antenna, especially on receive.
But something about 6 mtrs on a beam, magic.
Hf beams, yeah they do mostly what you expect. But something about the
short wave length, maybe.
Maybe 2 mtrs is that way too, I don't
a small three element beam works wonders on 6M
Leroy AB7CE
-Original Message-
From: Wayne Burdick
Sent: Thursday, June 22, 2017 11:30 AM
To: Ken Arck
Cc: Elecraft Reflector
Subject: Re: [Elecraft] 6 meters open this morning; listening 50.095 (CW)
Wow! I need a better antenna
Back some time when PSK31 first hit the scene, I was working the world with
a 5 watt PSK31 Small Wonders QRP box.
Six meters opened, up, and I got on with PSK31. The DX clusters and such had
a freakin cow. People called me names and
others begged me not to get on with PSK31. I relented to keep
What is the frequency they would like to change to?
73 Leroy AB7CE
-Original Message-
From: Wayne Burdick
Sent: Tuesday, June 06, 2017 8:44 AM
To: David Anderson
Cc: Elecraft Reflector
Subject: Re: [Elecraft] 6 meters is open
Thanks for the info, David.
Unfortunately I think a lot
I did not know about Tex until today.
I based my opinion on my own experience.
The last time I emailed moderator and got no
response I deleted KX3 from the groups
I belong to.
So I am not a problem to you have to deal with.
After today I doubt others will have a problem,
so I think you
Thanks Eric for resolving this.
You should know it was a year ago that I was banned from the KX3 list for
mentioning a heat sink.
I just two months ago emailed the list moderator, no response.
So I am skeptical about the timing of list moderator who was banning folks,
all of who mentioned
Ha! Same happened to me! No explanation, no response to my emails as to what
had I done wrong.
Thanks for IDing the problem. Now I know who to never buy from.
Leroy AB7CE
-Original Message-
From: Johnny Siu via Elecraft
Sent: Monday, May 15, 2017 9:12 AM
To: pkhjr ;
sorry you went thru that annoyance.
I have used Norton exclusively and have never had a virus
or a Norton induced problem.
73, Leroy AB7CE
-Original Message-
From: Ken Talbott
Sent: Saturday, March 18, 2017 7:05 AM
To: 'lmarion' ; elecraft@mailman.qth.net
Subject: RE: [Elecraft
My work and hobbies are not limited to amateur radio.
Many fringe use programs are scrutinized by several different security
monitoring software.
My main hobby of astrophotography uses programs that trigger extra scrutiny
frequently.
They are doing their job. Simple as that. Norton allows the
12:00 AM, lmarion wrote:
I am using it and it works PERFECTLY on both sides of the signal.
If you want more explanation than I am prepared to provide,
Cliffs site info is still there, just not the products.
73 Leroy AB7CE
-Original Message- From: Ron D'Eau Claire
Sent: Monday, February
To: 'lmarion' ; 'Heinz Bärtschi' ; 'Ken G Kopp'
Cc: elecraft@mailman.qth.net
Subject: RE: [Elecraft] K2 IF output
If you want to see spectrum on either side of the signal, you do not want a
filter in the loop. Ideally, you would see the entire spectrum *before* any
I.F. filtering on the panadapter
The Cliffton Webb unit was specifically made for K2 exact signal/clean easy
physical fit internally,
and a external IF pass band filter for a clean signal no matter what kind
of signals
are present in your shack.
Not a area of your receiver where you want to be hacking about. Just saying.
Clifton Web used to make a internal precision IF buffer to a SMA connector,
And Tony made me a little surface mount K2 IF softrock,
which HDR and all those others works great as a basic K2 pan adaptor.
My K2 SN 40 (now K2-100) is all tricked out with everything that was ever
available.
But
I also have it set the same way. All reports are great audio.
Roy AB7CE
-Original Message-
From: Tom Robertson
Sent: Saturday, February 11, 2017 7:28 PM
To: donw...@embarqmail.com
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3S and Heil PR10
Something isn’t racking then
-Original Message-
From: lmarion
Sent: Saturday, February 11, 2017 6:22 PM
To: Bill
Subject: Re: [Elecraft] KPA500 fan
I just lay a soft bladed fan on the top grill to pull air up. its run by a
variable power supply.
WAY quieter than the back fan, because it never comes on. It’s
When stars reach middle age, half of ~10 billion for our sun,they phase into
a state where there are no sunspots for the rest of their hydrogen burning
life.
So the sunspots cycle ( which is ~22 years by the way, it is based on
sunspot polarization, ~11 years is half of the cycle. ), will
Ditto that, the K3s/KPOD knobs are deluxe!
73 Leroy AB7CE
-Original Message-
From: Jean-François Ménard
Sent: Tuesday, January 17, 2017 2:39 PM
To: Elecraft Mailing List
Subject: Re: [Elecraft] Source for K3 weighted knobs
Hi,
I would like also to add….. by adding more weight on
Maybe its just about the most fun I had as a QRP OP.
Bought a K2 that did not exist yet.
Anxiously waited months for the bags of parts to build
what I was sure was going to be the ultimate QRP kit of all time.
You worked with Wayne directly if you had a problem.
Now that I own the complete
I have every radio elecraft has made. The KX3 is excellent, But the K3s
with diversity receive is outstanding, worth every penny.
Leroy AB7CE
-Original Message-
From: Vincent Diak
Sent: Saturday, January 07, 2017 1:04 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] kx3 receiver
High Mitch,
You have it working, but still not where I would like to be.
I am still not understanding why I can transmit CW in SSB mode with the
key line
without leaving SSB, but not with a KPOD macro.
But since none of the Elecraft folks have responded to this twice asked
question,
Full K3s KPA500 K line setup here.
I have 10 acres with 5 acres of it in antenna farm.
My K3s with subreceiver, used almost exclusively in diversity receive mode,
which works so
great, that I think if everybody was using one, 1500 watt amps would be a
waste of resources.
I knew
All equipment factory built/aligned K3s to KPA500 using KAT500.
Had the setup about 6 months now.
When first tuned up on any band SSB or CW mode, with 5 watts K3 drive,
it takes a short transmission at 15 watts K3 drive for the amp to ramp up to
500 watts as read on the KPA500.
It stays
Good question that I would like to know the answer to.
Leroy AB7CE
-Original Message-
From: ab2tc
Sent: Thursday, October 13, 2016 3:25 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3S QST Article
Hi,
Very good review - for the most part.
I am concerned about the
Thanks Joe for clearing that up. I had read and read and still
could not sort that one out.
Thanks Leroy AB7CE
-Original Message-
From: Joe Subich, W4TV
Sent: Wednesday, August 10, 2016 8:16 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] KFL3A-6K-IR Filter
Band
Yes there is cake. Install the SVGA option. It displays on my 27 inch
display beautifully.
Leroy AB7CE
-Original Message-
From: David F. Reed
Sent: Monday, August 08, 2016 3:06 PM
To: elecraft Reflector
Subject: [Elecraft] P3 tx Monitor on VGA?
I suspect this has been asked
Was OK and fun back in the day but it is all junk now and their product line
looks pathetic.
Leroy AB7CE
-Original Message-
From: Ken G Kopp
Sent: Monday, August 08, 2016 10:03 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] OT: The Heathkit clocks are back!
Likely of interest
Thanks for the tip Wayne. I have a lot of fun using random wires with my
KX2, will try this out.
The coolest QRP rig ever.
Leroy AB7CE
-Original Message-
From: Wayne Burdick
Sent: Monday, July 25, 2016 1:45 PM
To: Elecraft Reflector
Cc: k...@yahoogroups.com
Subject: [Elecraft]
KXPD2 came today and it works great right out of the box. Man, the KX2 is a
super fun rig.
It is in time to show it off at the Glacier/Waterton hamfest this coming
weekend.
No KPOD yet though.
Leroy AB7CE
__
Elecraft
I just bought K3S in last 30 days. So new I don't know how to use all
features.
K2 100, transverters, KX3, PX3, KPA100, KX1, K1,all in boxes and cases now.
Just my KX2 is still is in use because I have not figured out how to carry
the K3S around.
Leroy AB7CE
-Original Message-
All of the RADAR and beacon systems I worked on before I retired from the
FAA
used diversity receive. I could see the video clean itself up , but it was a
subtle.
I did not expect the diversity receive to work excellent like it does on my
K3S.
I was a little hesitant to get the SUB
What a relief!! I love my K3S, and hope every ham has the pleasure of a
high performance rig.
Another Elecraft superior moment, it did not destroy itself and waited for
the oops moment to pass.
Another teaching moment: Check power supply is No 1 on every trouble shoot
chart.
Ouch! Sorry to hear that.
You are in the right place to get help
73 Leroy AB7CE
-Original Message-
From: Ken Arck
Sent: Saturday, July 02, 2016 8:13 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Well Hell I just bricked my K3s
Just finished installing the 100 watt PA and
I have a different subreceiver question: The configuration selection is
bnc or ANTtuner ant 2. Does it require a separate antenna? I thought the
subreceiver would use a pickoff of the current antenna or a separate
antenna.
Thanks, confused Leroy AB7CE
Any one who can show pictures and advise me on the K3S mod would be a big
help. I have had a stroke since building the K2 100, and every thing else
Elecraft has ever made.
And it took my dominant right side to boot. So I am debating whether to
send it to Elecraft for the mod or if I am able
I just purchased my K3 line in the last month, and did not know about the
KAT turn on issue, nor did I see any documentation about turn on procedure.
So, from the first use I have turned on the K3 then the P3, KAT500 and
KPA500, with zero issues.
Since powering on my KX3 turns on the PX3 and
Is there a K3S setting that will power on the P3, KAT500 and KPA500 when you
power on the K3S ?
Thanks either way, Leroy AB7CE
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
“No internal hardware changes are required to use your MH2
with the Elecraft K3. Setup consists of attaching the
microphone, enabling it using the MENU commands and
making other front-panel adjustments.
Note: The jumper blocks and 5.6 k resistor supplied with
your microphone are not used. They are
Well I ordered $7k of K3S and a KX2. I received my KX2 two weeks ago and
having a bucket of fun with it.
But no K3S yet or even a shipping notice. Go figure.
Leroy, AB7CE
-Original Message-
From: stan levandowski
Sent: Tuesday, June 07, 2016 6:54 PM
Cc:
No problems here Wayne, and my blind son thanks you for the accommodation.
Leroy AB7CE
-Original Message-
From: Wayne Burdick
Sent: Thursday, June 02, 2016 10:57 PM
To: John Oppenheimer
Cc: Roger Marrotte ; lmarion ; Michael Walker
Subject: Re: New KX2 firmware, rev. 2.61
Can the K3S with antenna tuner installed receive on one antenna and transmit on
another?
Thanks Leroy
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Test
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email
The Bird wattmeter is a coarse and loose measurement device.
It is the most overrated power meter, especially in the amateur community.
The calibration is only possibly five percent at a single frequency,
usually the center frequency of the slug. Away from that frequency it
rapidly
goes way
I have the proper tools.
Over time the joints have become intermittent.
The joints I properly crimped and soldered have never become intermittent.
I guess the molecular bond with solder is greater ; )
Leroy
-Original Message-
From: Robert Harmon
Sent: Thursday, November 05, 2015
My experience/thoughts as well Phil. I still have a lot of fun with
K2 SN 40. But since I got the KX3, I have made the K2 with transverter
my 6m rig .
I have all options including the DSP and I like it.
Leroy AB7CE
-Original Message-
From: Phil Wheeler
Sent: Thursday, November 05,
Clearly ones perception of heaven is subjective
AB7CE Leroy in MONTANA
-Original Message-
From: Jim Brown
Sent: Thursday, September 24, 2015 9:23 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Price Increase Alert for mid October
On Thu,9/24/2015 6:03 AM,
If there is interest, I could do a retro net from Montana.
By that I mean, back to what started it all.
A QRP SSB 10 watts on my K2 SN 40.
On my 160 mtr loop I will hear most of you and the 20 mtr beam is there to
help you hear me.
Since the K2 has the capability to listen on the loop
Message-
From: lmarion
Sent: Thursday, September 24, 2015 10:31 AM
To: Ian - Ham ; 'Elecraft List'
Subject: Re: [Elecraft] This Sunday's SSB Net Cancelled
If there is interest, I could do a retro net from Montana.
By that I mean, back to what started it all.
A QRP SSB 10 watts on my K2
You can run whatever power/rig you want,
but you might be surprised if you try QRP.
-Original Message-
From: lmarion
Sent: Thursday, September 24, 2015 10:31 AM
To: Ian - Ham ; 'Elecraft List'
Subject: Re: [Elecraft] This Sunday's SSB Net Cancelled
If there is interest, I could do
I have built every K2 option there is. Definitely the KDSP2 is the way to
go. If you are going CW only, the QRO options are not needed, unless you
are severely antenna restricted.
Leroy AB7CE
K2 serial number 40
-Original
If you want to work more DX than you ever thought possible:
1. Learn enough CW to do basic exchanges.
Your speed and proficiency will increase dramatically by just doing it.
2. Get on 30 meters. Other countries have not abandoned CW
like the USA has. You will work DX after DX station.
You
From: lmarion
Sent: Saturday, October 25, 2014 6:52 PM
To:
Subject: homebrew KX3 electret microphone
I am trying to make a KX3 microphone, no up/down. Just PTT with MIC bias.
1) do I need 4 ring jack, or will a 3 ring work?
2) which jack ring is used for the MIC bias?
Thanks
I worked 12 single and 6 double hops yesterday, and band is opening now.
Leroy AB7CE
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
I got one of these, it’s a high quality item, recommended.Leroy AB7CE
-Original Message-
From: fredem
Sent: Friday, May 02, 2014 10:13 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Cool your KX3 and no price increase in May.
VE7FMN's Cooler KX heat sink next production run
15 meters is a very overlooked band in my opinion.
Its open way more than 10 meters. Its quiet, lots of room.
Easy 23 foot dipole antenna and a KX3 and you are working the world,
CW or SSB. And if you can get 48 feet of wire loop up somewhere,
you will be astonished. I can always find DX CW on
Is this net on? I don't hear a thing, on the beam or 160mtr
loopLeroy AB7CE
-Original Message-
From: kevinr
Sent: Sunday, September 15, 2013 11:53 AM
To: Elecraft@mailman.qth.net
Subject: [Elecraft] Elecraft CW Net Announcement
Please join us tomorrow afternoon and
Hi all,
Do CW nets operate similar to SSB nets? I would like to learn
how.
I checked into a couple, but I think I was out of order. They graciously
worked me in, but I think I was not going by the working format.
I listened, but am not good enough at CW to be sure I am doing things
89 matches
Mail list logo