Thanks for that info, Matt. Did not know that.
No controls in the BIOS anyway. I'll just have to live with it I guess.
Fortunately, I can use VOX for TX control and don't really need to use the
RS-232 control signals.
Bill W5WVO
Matt Zilmer wrote:
> Bill, even if you make BIOS changes to a po
Bill, even if you make BIOS changes to a port it won't affect the
port's operation under Windoze, since it's all controlled by a kernel
mode driver.
matt W6NIA
On Sun, 27 Sep 2009 11:18:17 -0600, you wrote:
>Julian, G4ILO wrote:
>
>> Have you tried looking in Device Manager at the properties for
Julian, G4ILO wrote:
> Have you tried looking in Device Manager at the properties for the
> serial port? On mine, on the tab where you can set the baud rate etc.
> there is a button marked Advanced Settings...
Yes. The advanced settings have nothing to do with the RS-232 control signals,
unfortu
You need to login in as "administrator" then you will have full access
or somehow your anti-virus/security software has locked you out. That
ought to be fun to find.
Bob
KB1FRW
73
>
> Have you tried looking in Device Manager at the properties for the serial
> port? On mine, on the tab where you
Bill W5WVO wrote:
>
> Hi Don,
>
> i had just come to the same suspicion when I read your email. And we are
> right.
> My homebrew desktop system (Tyan Tiger dual AMD board) works fine. This is
> a
> Dell problem.
>
> I will look around to see if there is an updated serial port driver that
>
It may be a too obvious comment, but the easiest way to tell what is
going on is with a serial breakout box. If you get one with LEDs you
can visually watch the status of the control and data lines in real
time.
David K0LUM
At 1:41 PM -0600 9/26/09, Bill W5WVO wrote:
>Julian, G4ILO wrote:
>
>
Julian, G4ILO wrote:
> I have never used VOX. Why would you need to? If you have a fully
> wired serial cable between the K3 and PC then just set WSJT to use
> that COM port and in the K3 menu configure PTT to use RTS.
Julian et al.,
I have always used VOX for WSJT keying, so I tried setting it
7 matches
Mail list logo
