After the K3 had been running for a few hours yesterday evening, just
listening to the bands, it stopped working with ERR PL1 (and PL2). These
were genuine hardware errors - neither of the two VFOs would tune and
both receivers were dead. Attempts to re-calibrate the VCOs ended with
ERR VCO an
I experienced a very similar problem this morning. ERR PL1 and PL2 starting
popping up. Then some other errors. It happened intermittently. I was
running 4.12 and then loaded the latest firmware. The errors have
continued. I have an email into Elecraft support and hope for a quick
solution.
Yesterday morning, I wrote:
>
>After the K3 had been running for a few hours yesterday evening, just
>listening to the bands, it stopped working with ERR PL1 (and PL2). These
>were genuine hardware errors - neither of the two VFOs would tune and
>both receivers were dead. Attempts to re-calibrate t
Hi group,
For some months now, I had the same intermittent problems as Ian: after the K3
has been running for a few hours, it stops working with ERR PL1 (and PL2). The
next morning, after cooling off, things are back to normal. Up to yesterday, I
was always able to make this issue go away insta
4 matches
Mail list logo