I installed K3 FW 5.50 to use my K-Pod, which I like very much. I have a
couple of weird problems using DXLab now that I can't explain and wonder if
the new FW might be related.
In DXLab, when I click on RTTY DX spot in SpotCollector the K3 changes the
frequency in the K3 but it's 850 Hz highe
In DXLab, when I click on RTTY DX spot in SpotCollector the K3
changes the frequency in the K3 but it's 850 Hz higher than the
frequency that DXLab sends to the radio. I'm using K3 FSK D with
1275/1445 tones, NOT AFSK.
An 850 Hz offset *sounds like* either your K3 or WinWarbler has
been reset
Jim,
I had the same problems. Switched back to 5.38 and the problems went away.
I have not tried 5.52 to see if the problems were fixed.
73, Tony K4QE
On Sat, Oct 1, 2016 at 12:33 AM, Jim McDonald wrote:
> I installed K3 FW 5.50 to use my K-Pod, which I like very much. I have a
> couple of
ehalf Of Joe
Subich, W4TV
Sent: October 01, 2016 07:24
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] [K3] FW 5.5 issue??
> In DXLab, when I click on RTTY DX spot in SpotCollector the K3 changes
> the frequency in the K3 but it's 850 Hz higher than the frequency that
> DXLab
07:24
> To: elecraft@mailman.qth.net
> Subject: Re: [Elecraft] [K3] FW 5.5 issue??
>
>
> > In DXLab, when I click on RTTY DX spot in SpotCollector the K3 changes
> > the frequency in the K3 but it's 850 Hz higher than the frequency that
> > DXLab sends to the radio.
: elecraft@mailman.qth.net
Subject: Re: [Elecraft] [K3] FW 5.5 issue??
> In DXLab, when I click on RTTY DX spot in SpotCollector the K3 changes
> the frequency in the K3 but it's 850 Hz higher than the frequency that
> DXLab sends to the radio. I'm using K3 FSK D with
> 1275/
I installed the newest K3 firmware, 5.54, reset DXLab, MMTTY, and the K3 to
2125 and still get the 850 Hz error when transferring a spot from SpotCollector
to the radio.
I changed all back to low tones, 1225/1445, and get the same error.
Tony, K4QE, reported that he had the problem until he rev
NAQCC - 6230
FISTS - 14948
Message: 25
Date: Sat, 1 Oct 2016 11:57:54 -0500
From: "Jim McDonald"
To: "'Elecraft Reflector'"
Subject: Re: [Elecraft] [K3] FW 5.5 issue??
Message-ID: <008c01d21c04$f4cb0b40$de6121c0$@n7
8 matches
Mail list logo