never
tried it.
Good luck and 73!
Jack Brindle, W6FB
Elecraft Engineering
>
> 73,
>
> Cliff K3LL/6
>
>
>
> -Original Message-
> From: Cliff Frescura [mailto:c...@cfcorp.com]
> Sent: Friday, October 09, 2015 2:10 PM
> To: 'Jack Brindle'
> Cc: 'Elecraf
[mailto:c...@cfcorp.com]
Sent: Friday, October 09, 2015 2:10 PM
To: 'Jack Brindle'
Cc: 'Elecraft Reflector'
Subject: RE: [Elecraft] [KAT500] PC Data to Amp Control?
Thanks Jack and others that replied off list.
I'm going to go with the y cable sniffer approach. Since I don't use the amp
all the
[mailto:jackbrin...@me.com]
Sent: Friday, October 09, 2015 12:55 PM
To: Cliff Frescura
Cc: Elecraft Reflector
Subject: Re: [Elecraft] [KAT500] PC Data to Amp Control?
Or connect the Kenwood’s serial port to the KPA500’s Radio port, then set the
RADIO = SERIAL in the KPA.
Follow the directions
lecraft@mailman.qth.net
> Subject: Re: [Elecraft] [KAT500] PC Data to Amp Control?
>
> The KAT500 can read, but not pull down the 4 band change lines.
>
> Dick, K6KR
>
> Sent from my iPhone
>
>> On Oct 8, 2015, at 21:07, Cliff Frescura <c...@cfcorp.com> wrot
Hi,
If I change bands on the KAT500 via the PC Data port, it appears that the
new band data is not sent to the Amp Control connector. Is this expected
behavior? (hoping no).
For reference, my setup is:
Kenwood TS-940
DXLabs Logging program
KAT500
KPA500
The 940 is connected to
The KAT500 can read, but not pull down the 4 band change lines.
Dick, K6KR
Sent from my iPhone
> On Oct 8, 2015, at 21:07, Cliff Frescura wrote:
>
> Hi,
>
>
>
> If I change bands on the KAT500 via the PC Data port, it appears that the
> new band data is not sent to the
]
Sent: Friday, October 09, 2015 10:55 AM
To: Cliff Frescura
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] [KAT500] PC Data to Amp Control?
The KAT500 can read, but not pull down the 4 band change lines.
Dick, K6KR
Sent from my iPhone
> On Oct 8, 2015, at 21:07, Cliff Frescura
7 matches
Mail list logo