Re: [Elecraft] [KX3] New behavior using JT65

Brian, As I told the original poster, I suspect a bad audio cable that is picking up noise and continuing to activate the VOX. He had both VOX and PTT active, and I don't know if that has anything to do with it. I don't think it is a KX3 problem. 73, Don W3FPR On 5/26/2017 9:59 AM, Brian

Re: [Elecraft] [KX3] New behavior using JT65

That's weird. I have not experienced an intermittent VOX. Mind you, I run with VOX on all the time and have at least a hundred hours in this mode and VOX setting. Very stable. What firmware level are you at? regards, Brian VE3IBW On Thu, May 25, 2017 at 8:16 PM, Leo Aniol

Re: [Elecraft] [KX3] New behavior using JT65

Has been happening to me here also. And it is intermittant. Leo, AI5II On May 25, 2017 5:54 PM, "Don Wilhelm" wrote: > Dave, > > You still may want to check that cable - or perhaps the soundcard has a > high noise floor. > When the audio stops, the KX3 should drop out

Re: [Elecraft] [KX3] New behavior using JT65

Dave, You still may want to check that cable - or perhaps the soundcard has a high noise floor. When the audio stops, the KX3 should drop out of transmit when using VOX. Of course, I don't know what happens if VOX and PTT are asserted together. Cables are always one of the high failure items

Re: [Elecraft] [KX3] New behavior using JT65

Don, thanks for the suggestion; it seems somehow I got VOX turned on when it was off before... Mystery solved. Thanks & 73 de Dave, W5SV On 5/25/17 17:27, Don Wilhelm donw...@embarqmail.com [KX3] wrote: Dave, Are you using VOX? If so, try replacing the cable between the soundcard and the

Re: [Elecraft] [KX3] New behavior using JT65

Dave, Are you using VOX? If so, try replacing the cable between the soundcard and the KX3 mic jack, I am thinking it may have a broken shield and is picking up noise. Try switching to PTT instead of VOX. I don't know your software application nor its capabilities, but you likely need a