This "feature" has been commented on in the past. It appears the P3
automatically recomputes the display limits in Fixed Tune mode if the K3
frequency is changed via the RS232 port (i.e., the P3 gets the frequency
change command). When I use the Band buttons on the KPA500 to change
bands the P3
I think the following issue may be part of the same problem.
For the WARC bands, I like to have the P3 set up to show the
whole band. When I use wsjt-x to switch to 17M, the P3 changes
from showing 100KHz between 18.068 and 18.168 to showing 100KHz
from 18.100 to 18.200. Annoying.
73 Bill AE
I have a K3/100. For CW and RTTY below 10 m, I normally run a 20 KHz
span with the ends of the span on even 20 KHz boundaries [3500-3520,
3520-3540, etc]. I'm in Fixed Tune mode where the span edges remain
fixed and the VFO cursors move as I tune. Tuning off the edge results
in a full 20 KHz
3 matches
Mail list logo