Hi again,
A couple of people have commented that the price for the fully built is a
little high.
So
I have decided to lower the price to AUS$170
The kits are still a bit off, I suggest the fully built to those that are
impatient. (construction documentation is the main delay)
cheers, Graham
- KL7UW
--
Date: Mon, 25 Mar 2013 14:52:57 -0700 (PDT)
From: grumss gru...@yahoo.com.au
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] 472KHz transverter for KX3
Message-ID: 1364248377705-7571853.p...@n2.nabble.com
Content-Type: text/plain; charset=us-ascii
Prices are yet
Thanks for the positive comments ED!
As you may have seen, previously I specialize in microwave transverters.
This was a Fun project to break it up a bit!
I have really enjoyed getting back to the basics and at the moment is my
favorite project :)
There is always improvements to be made and
Sorry, I forgot to mention that the mixer is an ADE-1
--
View this message in context:
http://elecraft.365791.n2.nabble.com/472KHz-transverter-for-KX3-tp7569089p7571880.html
Sent from the Elecraft mailing list archive at Nabble.com.
Gday all,
Ive designed and built a transverter board for the band, It is working very
well and is turning out to be popular.
The K3 is a superb radio for driving it and is what i'm using myself.
IF is typically 28Mhz but can easily be changed.
There has been some delays due to component
Seems there may be a problem for some with the first link.
try going straight to my website http://www.vk3xdk.net46.net/
or doing a google search on my call sign.
73, Graham VK3XDK
--
View this message in context:
Prices are yet to be confirmed,
the kits should be around AUS$80 and
fully built boards AUS$200
It may seem a little expensive but I hand built them, tune and test which
takes a few hours.
(a limited number of fully built ones are available already at this price)
73, Graham VK3XDK
--
View
I have started to design and build one for those interested in the band.
http://m1kta-qrp.blogspot.co.uk/2013/01/472khz-kx3-transverter.html
72
Dom
M1KTA
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Dominic please keep us updated, interesting.
Best regards, Tim Hague
Skype m0afj.Tim
Sent on my iPad
On 24 Jan 2013, at 09:52, Dominic Baines dominic.bai...@gmail.com wrote:
I have started to design and build one for those interested in the band.
Tim,
I see two main options...
1. Transverter is 'dumb' and is just there attached to the KX3 and no
controls (other than basic T/R) come from KX3 to Transverter and you
live with a display that is 'offset' by the IF.
or
2. Transverter works with the KX3 menus for Transverters (see the XV
Hi Dom, I suppose being an 'old boy' I've been used to transverters that are
dumb, I just learnt to ignore the MHz read outs and substituted the correct
figures in my head!. I have the K3 as well as the KX3 and have just fitted the
transverter output option which gives me 1mW to drive a box.
The transverters may be dumb, but the KX3 and the K3 both have the
smarts to display the output frequency - anywhere between 0 and 24999
MHz. Just use the XVn RF menu to set the low end of the transverter
output band.
73,
Don W3FPR
On 1/24/2013 8:30 AM, Tim Hague wrote:
Hi Dom, I suppose
Thanks Don,
Yes agreed I just advised was looking at two options.
I had already been sent an email asking was this limited to KX3 only?
The answer would be no hence the dumb option.
UK has 472KHz-479KHz available to full licencees with a Notice of
variation to the licence.
The option
Dom,
Note that there is also a XVn OFS menu entry that will allow you to
enter an offset to compensate for variations in the transverter LO and
give you the correct frequency reading in the lower order digits too.
73,
Don W3FPR
On 1/24/2013 9:08 AM, Dominic Baines wrote:
Thanks Don,
Yes
Thanks also noted.
72
Dom
M1KTA
On 24/01/13 15:16, Don Wilhelm wrote:
Dom,
Note that there is also a XVn OFS menu entry that will allow you to
enter an offset to compensate for variations in the transverter LO and
give you the correct frequency reading in the lower order digits too.
73,
that the K3 already has
Dave
WW2R
Date: Thu, 24 Jan 2013 08:41:36 -0500
From: Don Wilhelm w3...@embarqmail.com
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] 472KHz transverter for KX3
Message-ID: 51013a10.5050...@embarqmail.com
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
WW2R
Date: Thu, 24 Jan 2013 08:41:36 -0500
From: Don Wilhelm w3...@embarqmail.com
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] 472KHz transverter for KX3
Message-ID: 51013a10.5050...@embarqmail.com
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
The transverters may be dumb
17 matches
Mail list logo
