Just to confirm: The threaded PEM nut at the far end of the AXT1 tripod adapter
has 4-40 threads. To use it as a tie point for a counterpoise wire, all you'd
need is a 4-40 thumb screw as others have mentioned. The AXT1 has two
additional unthreaded 1/8" (3 mm) holes which should help with
One final final: The Elecraft part number for the thumbscrews is E700050
73 Eric WD6DBM
Sent from Yahoo Mail on Android
On Sun, Dec 2, 2018 at 5:27 PM, rich hurd WC3T wrote: At the
risk of repeating myself from the KX3 reflector...
Yeah, I encountered that issue myself. You’ll need to
8 6:48:10 PM
Subject: [Elecraft] AXT1--with a twist
I rigged a camera mout arm to my recumbent trike. It folds in to the frame
while riding, then I fold it out for mounting the AX1 to it wih the TAX1 when
stopped. However, I noticed on the TATX1 that although it has a threaded hole
for att
At the risk of repeating myself from the KX3 reflector...
Yeah, I encountered that issue myself. You’ll need to crib up something
yourself. The thread is 4-40 pitch. The size of the threaded hole ought to
be documented somewhere.
On Sun, Dec 2, 2018 at 20:01 Don Wilhelm wrote:
> Eric,
>
>
Eric,
Go to the hardware fastener section of your favorite hardware store or
DIY store.
Most of them have a "tool" (card) to determine screw and thread sizes -
use it and buy the appropriate thumbscrew or other fastener.
To help you a bit, I would say that the screw thread is either 4-40,
I rigged a camera mout arm to my recumbent trike. It folds in to the frame
while riding, then I fold it out for mounting the AX1 to it wih the TAX1 when
stopped. However, I noticed on the TATX1 that although it has a threaded hole
for attaching radial wire(s), there is no thumbscrew provided,
6 matches
Mail list logo