On Fri,2/19/2016 5:14 AM, Bill wrote:
Behringer makes lots of audio toys - and they are affordable.
Yes, but they're NOT a good company, and should be avoided. Lousy
quality, lousy support, and well known to steal designs from REAL audio
companies.
The REAL companies are Shure, Rane, Mackie
Behringer makes lots of audio toys - and they are affordable.
Note: I no longer use them - sold/gave away all of them. With the K3
Equlizers I no longer needed them. Not only works better/easier - makes
the station far less cluttered. Thank you Elecraft!
Bill W2BLC K-Line
__
In my continued looking and reading, I have been coming across rack-mount line
mixers. Since all I’m really trying to do is interconnect my equipment (the TX
and RX EQs in the K3 and KX3 seem to work fine for me) and since someone
mentioned the Shure SCM800, would there be any “gotchas” going th
I also use a mixer and I use a bigger one, a Behringer 1622FX. It has
two stereo mixing busses, Main and Sub, so really four channels. You
can route any input to either or both and fade from left to right as
you wish. I have all the sources from rigs and the PC sound card and
mics going to inputs.
I’m using a mixing board for my setup as well. I used a SoundCraft EPM-8
(EPM-6) will also work. The 8 says 8 channels, but it’s really 12. 8 mono and
2 stereo. Right now I only have KX3, a nice used K3 is in the very near
future and is why I set this up.
Channel 1: Microphone
Channel 2: O
Here's an idea for the shared key...
Assuming a key with 2 leads and 4 rigs...
Build a switch box around something like an NKK MRX204 rotary switch
(This one switches 2 common leads simultaneously to 4 pairs of 2
switched leads) Add a perf board or custom PCB with appropriate chassis
and 3.5mm T
rear.
Ken - ke4rg
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Joel Black
Sent: Wednesday, February 17, 2016 6:28 PM
To: Elecraft Reflector Reflector
Subject: [Elecraft] Audio Mixer in the Ham Shack
Yep, I ve looked and there is a *lot* of inform
Yep, I’ve looked and there is a *lot* of information on this reflector about
the subject.
I have worked with David Anderson, GM4JJJ, on setting up my KX3 trying to
minimize the connecting and disconnecting of cables to my Focusrite 2i2 sound
card. The more I thought about the advice he gave me,
8 matches
Mail list logo