John,Re: "Anytime I change the mode from LSB or USB on any band to CW it
starts to send a “dit” without stopping..."Take a look at the plug and jack.
Be sure there is no damage to the jack, and that none of the plug was left
behind in the jack. That happened to me once on a keyboard. A part
John,
The recommended troubleshooting steps in cases like this is to remove
everything from the K3 except the power cable and the coax to a dummy load.
With that done, does the problem still appear - if so contact
supp...@elecraft.com.
If it does not appear, then plug things back in one at
Good morning
Do you have any external programs connected via CAT control?
Mike va3mw
Sent from my iPad
> On Jul 5, 2019, at 6:58 AM, Roy Koeppe wrote:
>
> John, I think you may have won the Unique Problem Award with that one. Good
> luck (sorry).
>
> Roy K6XK
>
>
> I am trying to run
John, I think you may have won the Unique Problem Award with that one. Good
luck (sorry).
Roy K6XK
I am trying to run down a CW transmit problem on my K3s. Anytime I change
the mode from LSB or USB on any band to CW it starts to send a “dit” without
stopping and I have to halt it by rest
I am trying to run down a CW transmit problem on my K3s. Anytime I change the
mode from LSB or USB on any band to CW it starts to send a “dit” without
stopping and I have to halt it by restoring the configuration. This does fix it
until I try to switch to CW again; and then, the same story.
I
5 matches
Mail list logo