I would suggest not getting scotch tape anywhere near any ESD sensitive
components.
I find those bits of black sponge that elecraft package their chips in to
be quite useful... once you've freed one or 2 of them up of course.
--
"Nosey" Nick Waterman, G7RZQ, K2 #5209.
use Std::Disclaimer;[E
Joe,
I would suggest not getting scotch tape anywhere near any ESD sensitive
components.
It develops quite a charge due to the triboelectric effect when you
strip it off the reel, and as a result, if it does not outright kill the
device, it can make it a "walking wounded", working at first,
Fine tool from Weller - the ESF 120:
http://www.f6blk.net/main_fr.php?page=9
and
http://www.labem.pl/obrazki%20weller/esf120.JPG
Simon Brown
---
http://blog.hb9drv.ch/
- Original Message -
From: "Ian Stirling" <[EMAIL PROTECTED]>
On Monday 16 January 2006 03:35, Clint Sprague wr
On Monday 16 January 2006 03:35, Clint Sprague wrote:
> When you install a component on the printed
> side of the circuit board, and then you tip the board
> over to solder, what are accepted methods to keep the
> compenent from falling off?
I use a pencil eraser between the board and workbench
often tenuous :).
On Mon, 16 Jan 2006, Joseph Trombino Jr wrote:
- Original Message - From: "Clint Sprague" <[EMAIL PROTECTED]>
To:
Sent: Sunday, January 15, 2006 10:35 PM
Subject: [Elecraft] Construction question
I'm attempting my 1st contruction project i
- Original Message -
From: "Clint Sprague" <[EMAIL PROTECTED]>
To:
Sent: Sunday, January 15, 2006 10:35 PM
Subject: [Elecraft] Construction question
I'm attempting my 1st contruction project in many
years...
CMOS4 keyer, and I have what is probably a pretty
Clint, WS1V asked:
When you install a component on the printed side of the circuit board, and
then you tip the board over to solder, what are accepted methods to keep the
compenent from falling off? I've read that you should bend the leads to
hold the component onto the board but I was wondering
I just took a certification class at work for IPC-610(D) whihc is for
solder inspection. So, I'm now authorized to answer your question! The
method of bending the leads over is called "cinching" the leads and is
acceptable as long as the component lead does not get close to other
circuit comp
I'm attempting my 1st contruction project in many
years...
CMOS4 keyer, and I have what is probably a pretty
stupid question that maybe others can answer for me
here. When you install a component on the printed
side of the circuit board, and then you tip the board
over to solder, what are accepted
9 matches
Mail list logo