Re: [Elecraft] DVR memories not via K-Pod

In N1MM+: Cat Macro strings used to play back Radio # 1 internal K3 CW/data messages or DVR voice keyer messages * M1 = {CAT1ASC SWT21;} * M2 = {CAT1ASC SWT31;} * M3 = {CAT1ASC SWT35;} * M4 = {CAT1ASC SWT39;} 73, Jim N7US -Original Message- In W

Re: [Elecraft] DVR memories not via K-Pod

In Writelog, I activate the DVR using the F keys on my computer keyboard. This works very well and IT was easy to set up using N6EE's instructions. I am sure that it can be done with other logging software such as N1MM, too. John KK9A Ken Ramirez KP3MM wrote: Is anyone aware of a way to selec

Re: [Elecraft] DVR memories not via K-Pod

, WB9CIF -Original Message- From: elecraft-boun...@mailman.qth.net On Behalf Of Ken Ramirez de Arellano Sent: Monday, November 9, 2020 12:49 To: elecraft@mailman.qth.net Subject: [Elecraft] DVR memories not via K-Pod Is anyone aware of a way to select the DVR recorded messages externally

[Elecraft] DVR memories not via K-Pod

Is anyone aware of a way to select the DVR recorded messages externally on a K3S? I don’t want to wear out the M1-M4 memory buttons on the rig and I’m already having problems with a new K-Pod where the buttons are sticking and not starting a recorded message until pressed 2 or more times. Not good

[Elecraft] DVR Randomly Loses Memory

Older generation K3's (SN 101, 157, 1763 and 8714) utilized with recently added DVR's operating in the Caribbean for the past 2 years. Station consists of 4 K3's on 1 acre with 4 stations on the air as a M/M at the same time thru 3 towers. There is allot of RF around. The radios, computers and 1KW

[Elecraft] DVR audio

I think RF is getting into headset. Time to try ferrite beads. Ray W8LYJ Sent from my iPad __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailma

Re: [Elecraft] DVR audio

On Mon, Mar 4, 2019, 6:22 AM Dave Cole (NK7Z) wrote: > Does FAST also remove the light delay in the audio? > Yes. However, with FAST enabled, you cannot hear what the speech compressor is doing. Everything you hear while transmitting is "unprocessed." 73, Bob, N6TV ___

Re: [Elecraft] DVR audio

Does FAST also remove the light delay in the audio? 73s and thanks, Dave (NK7Z) https://www.nk7z.net Award Manager, 30MDG Grid Awards ARRL Technical Specialist ARRL Volunteer Examiner ARRL OOC for Oregon On 3/3/19 7:01 PM, Bob Wilson, N6TV wrote: Check CONFIG:TX MON, to see if it is set to NOR

Re: [Elecraft] DVR audio

Check CONFIG:TX MON, to see if it is set to NOR or FAST (FAST should have no "distortion", because you hear unprocessed MIC audio, with no delay). This applies to both your own MIC audio and KDVR3 recordings. Check also CONFIG:TX DVR. Is it set to NOR or IND? If IND, there are two different moni

[Elecraft] DVR audio

When I play a recorded message audio transmitted is ok , confirmed by listeners and monitoring remote SDR. What I hear in my earphones with monitor turned on is distorted. Ray W8LYJ Sent from my iPad __ Elecraft mailing list Home: htt

Re: [Elecraft] DVR equalization

Except that when I go to the Data mode the bottom 200 Hz of the receive audio spectrum is heavily rolled off and can not be restored with the Shift/Low cut adjustments. Michael Blake k9...@mac.com > On Jun 2, 2018, at 8:04 AM, Michael Blake wrote: > > It appear

[Elecraft] DVR equalization

It appears that when recording off the air that the K3s’s receive EQ is ahead of the DVR’s input and when playing the recording back the transmit EQ settings are also applied to the output of the DVR before being fed into the SSB modulator. Is it correct that the radio’s EQ settings affect both

Re: [Elecraft] DVR used with contesting software (N1MM)

I had a very similar experience working in the California QSO Party. I don't think the contest logger was part of the problem since I had problems with my USB hub and most of the time the logger couldn't see the K3. 73 Bill AE6JV On 10/12/15 at 10:51 AM, w...@verizon.net (Ron W3ZV) wrote: Tr

Re: [Elecraft] DVR used with contesting software (N1MM)

Ron, as far as I can tell this happens with manual PTT asserted any time during the repeat CQ pause or during transmission. ESC is the only way to interrupt the cycle or an actual canned transmission. This may not be fixable, depending on the specifics of the K3 CAT messaging (i.e. does it se

[Elecraft] DVR used with contesting software (N1MM)

Trying to figure out a problem. I spent this weekend on the PA QSO Party. I use the K3 DVR for CQ, MyCall and QSL, TU, QRZ messages, activated by N1MM macros. When things slowed down I used repeat CQ. I have a serial port activating PTT with canned messages and my footswitch for live mic. This

[Elecraft] DVR interrupt.

Once, before my K3 lost its mind, if I keyed the VOX during the playing of a recorded message, the message would stop. Now nothing but a button push on REC will stop it. Rather unhandy for contest operating. What am I forgetting? -- Dick - K4XU ___

[Elecraft] dvr weirdness

Hi there, while participating in the Georgia QSO Party, I noticed some interesting weirdness with the DVR repeat. After a number of repeats, rather than playing back the message it just goes on TX and no message is played back, and it seems to just open the mic for recording as I can all of a sud

Re: [Elecraft] DVR Repeat on LCD display

I have the same complaint as I operate my K3 on the Topband at Multi-Multi station W3LPL. While in the repeat mode, during the pauses, I listen to the sub receivebut with REPEAT constantly being displayed there is no way to know what frequency I am tuning. It would be helpful, if while tuning th

[Elecraft] DVR Repeat on LCD display

Hi all Just getting ready for CQWW, will be using Wintest for the first time and scripts to used the K3’s DVR Problem I have is that when calling CQ on VFO A using M1 repeat, the VFO B frequency display is overwritten by the word REPEAT .. this for me is a hindrance as I want to see the VFO B

Re: [Elecraft] DVR

The DVR feature is coming along. It will take a simple firmware upgrade once it's ready. 73, Wayne N6KR On Sep 27, 2012, at 9:27 AM, Mike Mardis wrote: > I just received my KX3 2 days ago. It was definitely worth the wait. > Thanks to all who post on here as it has helped tremendously with >

[Elecraft] DVR

I just received my KX3 2 days ago. It was definitely worth the wait. Thanks to all who post on here as it has helped tremendously with some things I would've thought were issues with the radio. To my question. I remember there being a post about the DVR. I can't remember the specifics. Is that

[Elecraft] DVR and PTT (KPA500)

Hello, I have the following problem by working with a K3 and KPA500. If I use the internal DVR of K3 the KPA500 will not switched by the PTT. With the K3-DVR I just have the K3-Power output. When I am using the footswitch or the Keyer or the Mic the KPA500 will be in use. Looks be that I hav

Re: [Elecraft] DVR drive adjustment?

Unfortunately, it's not adjustable (at this time). However, many feel it should be. In the past, Lyle has said he would take a look at the feasibility of making it adjustable. With the KX3 firmware effort however, it's probably not high on the priority list right now. 73, Bruce, N1RX > Is it poss

[Elecraft] DVR drive adjustment?

Is it possible or necessary to adjust the DVR playback output to reflect moderate ALC levels? Robert Sands K7VO __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: ma

Re: [Elecraft] DVR Audio

Thanks for posting that Fred. It is a great help for DVR operation, Todd, WA7U - Original Message - From: "Cady, Fred" To: Sent: Thursday, March 31, 2011 10:00 AM Subject: [Elecraft] DVR Audio >I recently got a DVR and put together some of my thoughts on how it >

[Elecraft] DVR Audio

I recently got a DVR and put together some of my thoughts on how it operates gleaned from previous discussions on the reflector. I put a pdf up on http://www.ke7x.com/home/the-dvr As always, comments gratefully accepted. Cheers, Fred, KE7X Fred Cady fcady at ieee dot org

[Elecraft] DVR REPEAT - Sub RX freq where are you ?

I decided to use the K3's DVR in a VHF contest today instead of firing up N1MM with it's .wav files. Pleased at how the DVR performed, with one exception. Using it to call CQ with 'Repeat' set 10 secs whilst tuning the band with the 2nd RX. This worked, however as a big REPEAT message is where VF

Re: [Elecraft] DVR Questions

OK, I realize I was not massively clear in my questions. 1-3 are about when I record, from my mic, an exchange or CQ onto one of the DVR memories. 4-5 relate to recording off the air and then playing it back. My wife is very happy I didn't try to support the family as a Technical Writer. 73,

Re: [Elecraft] DVR Questions

I can't top post to this set of questions. See below. > 1. Does the TX EQ apply to what I record in the DVR, no > or does it apply when the DVR plays back into the TX? yes > 2. When I play the DVR back, does the monitor signal reflect whatever > TX EQ I set? If fastmon is not enabled, yes.

[Elecraft] DVR Questions

Following K9YC's advice, I set my TX EQ up to roll off the lows and help out the highs. I got very good reports on my audio in the CQ WW SSB. I'm using the Heil Proset from Elecraft [electret I think]. I have the RX EQ set to approximate the response curve of my hearing aids [although 16 dB i

Re: [Elecraft] DVR

Of Bob Naumann Sent: Saturday, October 30, 2010 6:02 AM To: elecraft@mailman.qth.net Subject: [Elecraft] DVR Just a short note - this KDVR3 is the best. I have not had to speak into the mic yet - my XYL does not know I'm operating an SSB contest! How cool is that? I know this can be done with so

[Elecraft] DVR

Just a short note - this KDVR3 is the best. I have not had to speak into the mic yet - my XYL does not know I'm operating an SSB contest! How cool is that? I know this can be done with sound cards, etc., but the DVR just works perfectly and easily integrates easily with N1MM. Very cool. Thanks

Re: [Elecraft] DVR play in TX mode

Iain MacDonnell - N6ML wrote: > > Yes, because it's in "beta" status - follow the instructions at: > > http://www.elecraft.com/K3/k3_beta_release_instructions.htm > > to install 2.73, which is the latest beta. 2.72 had significant > updates related to the operation of the DVR. > > GL! > >

Re: [Elecraft] DVR play in TX mode

LB3SA wrote: Iain MacDonnell - N6ML wrote: Are you running at least firmware version 2.72 on your K3? No... I'm running 2.67. Just updated today. Is there a newer version than what the K3 Utility installs when I click the "Check Versions Now" button? Yes, because it's in "beta" status

Re: [Elecraft] DVR play in TX mode

Iain MacDonnell - N6ML wrote: > > > Are you running at least firmware version 2.72 on your K3? > No... I'm running 2.67. Just updated today. Is there a newer version than what the K3 Utility installs when I click the "Check Versions Now" button? But that would explain my problem -- View

Re: [Elecraft] DVR play in TX mode

LB3SA wrote: I just received and installed the KRX3 and KDVR3 today. Everything works great except maybe one thing: 1) When I tap M1-M4 for playback of messages it goes to TX plays them. THis is correct but it does not return to RX. Is this just the nature of the beast? 2) when I record audio

[Elecraft] DVR play in TX mode

I just received and installed the KRX3 and KDVR3 today. Everything works great except maybe one thing: 1) When I tap M1-M4 for playback of messages it goes to TX plays them. THis is correct but it does not return to RX. Is this just the nature of the beast? 2) when I record audio with the AF REC

[Elecraft] DVR & monitor function

The DVR works great ... yet I have a question or suggestion... When I run SSB I have the monitor level turned to 0 ( off)... and then I do not hear the memory playback It is very strange knowing you are Xmiting, and not hearing what's going out. Could there be a way to set a monitor leve

Re: [WT-support] [Fwd: [Elecraft] DVR from software]

Hello, Now the DVR are going out for the K3 I have a software request: The K3 internal voice keyer can be programmed with the RS232 commands. Is it possible to add those commands to Win-test? This seems like a must to me. When I look at the number of K3s being used by contesters, it would mak

[Elecraft] DVR from software

In response to the person that just posted about DVR functions from a computer program - >From page 14 of the K3 programmers reference manual. SWT/SWH * (Switch Emulation; SET only) K3 Extended SET format (K31): SWTnn; (TAP functions) or SWHnn; (HOLD functions). nn is determined from Table 4.

RE: [Elecraft] DVR

On the K3 order form it states fall or winter 2008. Bob Serwy - N9RS -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of David Ferrington, M0XDF Sent: Thursday, August 14, 2008 11:32 AM To: LB3SA Cc: elecraft@mailman.qth.net Subject: Re: [Elecraft] DVR

Re: [Elecraft] DVR

been no word, other than it will be shipped after KRX3, so in theory, they could be starting on it now. I for one am eagerly awaiting (since May'07) 73 de M0XDF, K3 #174 -- Either that wallpaper goes, or I do. - last words of Oscar Wild On 14 Aug 2008, at 17:28, LB3SA wrote: Has anyone received

[Elecraft] DVR

Has anyone received or tried the DVR yet? I'm not sure if this is yet to be developed or if they started to ship it. As far as I understand it is due to be shipped to me sometime late this fall - but I have a late serial number on my K3 (S/N 1412). Are - LB3SA KX1 - K2 - K3 -- View this message

[Elecraft] DVR release date

Hi. I am awaiting my new K3 but I wanted it to be shipped with all the options including the DVR (Digital Voice Recorder) installed, so I have to wait. Are there any news on the progress/release date on the DVR ? Best regards LA4AMA Roar -- View this message in context: http://www.nabble.com/