Martin,
Please check the "PITCH" setting vs. the mark tone generated by
your AFSK software. The K3/K3S contains a very narrow audio
filter on the input audio (CONFIG:AFSK TX). If the AFSK TX
filter is ON and your software does not match the K3 PITCH you
will see the behavior you describe.
73,
Sorry. But DATA A is for USB modes like FT8, PSK, etc. RTTY (FSK) is a LSB mode
and should use the Sub-Band AFSK A on a K3.
Sent from my iPhone
...nr4c. bill
> On Nov 19, 2018, at 10:45 PM, Martin Sole wrote:
>
> Okay, but the K3 book states AFSK A mode can also be used for Audio-shift
>
On 11/19/2018 7:38 PM, Bob McGraw K4TAX wrote:
You should be operating in DATA A mode for AFSK as it is an audio data
mode.
NO! RTTY is LSB, and requires AFSK A. DATA A is USB, and is used for all
other computer-generated digital modes.
73, Jim K9YC
Well done Richard. Gold star!
SYNC DT.
Don't ask, I have no idea. MMTTY demod was set correct, I use 915Hz but
the TX audio was different, like 2125Hz.
Panic over hihi!
73
Martin, HS0ZED
On 20/11/2018 10:48, Richard Ferch wrote:
There is a narrow transmit AF filter configurable in AFSK
So far as I am aware software shouldn't be changing. No CAT connection
from rig to PC, just changing mode on the front panel of the K3 and
sending tone in the LINE IN connector.
On 20/11/2018 10:36, Nr4c wrote:
Check the DATA Sub-mode. You may be thinking AFSK but the software may reset to
Correct, correct and correct.
73
Bob, K4TAX
On 11/19/2018 9:45 PM, Martin Sole wrote:
Okay, but the K3 book states AFSK A mode can also be used for
Audio-shift transmit, but is optimized for RTTY. Also the RTTY text
decoder does not work in DATA A mode.
Martin, HS0ZED
On 20/11/2018
There is a narrow transmit AF filter configurable in AFSK A. If this filter
is turned on, you must keep your transmit audio frequency within the filter
bandpass, otherwise there will be nothing transmitted. Set your RTTY
software's audio frequency to match the K3's PITCH setting in AFSK A and
Okay, but the K3 book states AFSK A mode can also be used for
Audio-shift transmit, but is optimized for RTTY. Also the RTTY text
decoder does not work in DATA A mode.
Martin, HS0ZED
On 20/11/2018 10:38, Bob McGraw K4TAX wrote:
You should be operating in DATA A mode for AFSK as it is an audio
You should be operating in DATA A mode for AFSK as it is an audio data
mode.
73
Bob, K4TAX
On 11/19/2018 9:26 PM, Martin Sole wrote:
Can anyone help with a quick DATA mode problem.
I've always used AFSK but it seems to have stopped working on
transmit. I can set DATA A and then send audio
Check the DATA Sub-mode. You may be thinking AFSK but the software may reset to
FSK D and that doesn’t require audio into the sound system.
In the TX monitor, Do you hear diddles or just a single tone?
Sent from my iPhone
...nr4c. bill
> On Nov 19, 2018, at 10:26 PM, Martin Sole wrote:
>
>
Can anyone help with a quick DATA mode problem.
I've always used AFSK but it seems to have stopped working on transmit.
I can set DATA A and then send audio from the PC into the radio. It
transmits fine, no problem. Just switching to data mode AFSK and then
sending audio. the vox operates as
11 matches
Mail list logo