hi Fred,
With Elecraft marketing a K2 w/SSB option - why would
they drop all desk mobile MICROPHONES for this rig?
Doesn't make sense - am I missing something? Should
I not buy the SSB Option for my K2 # 5422?
I'm mostly concerned about the electrical physical
connector and interface
For the small amount of SSB I operate I use the Kenwood MC-60
desk mic. Always get good audio reports.
Doug
W6JD
K2/100 #1626
-- Original message --
From: Peter Zenker [EMAIL PROTECTED]
Fred,
After lots of testing QRPproject is selling the Kenwood MC 43 as best
With Elecraft marketing a K2 w/SSB option - why would
they drop all desk mobile MICROPHONES for this rig?
Doesn't make sense - am I missing something? Should
I not buy the SSB Option for my K2 # 5422?
I'm mostly concerned about the electrical physical
connector and interface to my K2. I even
Hi Fred,
The manufacturer of the MH2 microphone discontinued that model and we
have been looking for a replacement. We are in discussions with another
manufacturer now for a replacement hand mic, but it will be a couple of
months before we can get it in.
Fortunately we designed the K2 and
Fred,
As Eric indicated, the K2 microphone configuration header can be
plugged/wired to work with most any microphone having an 8 pin mic plug.
Obtaining a microphone is easy - if you want to go the inexpensive route,
pick up a CB microphone, they are plentiful and if it doesn't come with an 8
Fred,
After lots of testing QRPproject is selling the Kenwood MC 43 as best choice
together with the K2. It generates an excellent SSB signal, it´s size meets
the K2 look and it can be 1:1 connected at the K2 Microphon port.
72/3 de Peter, DL2FI
www.qrpproject.de
I picked up the MC-43S because because they jumper straight across, I used
computer jumpers and didn't connect the 5 volt.
It was easier than trying to come up with some header so I could use my Yaesu
microphones.
Joe N9JR
Keith Hamilton [EMAIL PROTECTED] wrote:
What are the P1
: elecraft@mailman.qth.net
Betreff: Re: AW: [Elecraft] Elecraft K2 Microphones?
What are the P1 connections for the MC-43S microphone?
Keith Hamilton, W8GX
Peter Zenker wrote:
Fred,
After lots of testing QRPproject is selling the Kenwood MC
43 as best
choice together with the K2
: Mittwoch, 12. April 2006 19:10
An: Peter Zenker
Cc: elecraft@mailman.qth.net
Betreff: Re: AW: [Elecraft] Elecraft K2 Microphones?
Peter Zenker writes
After lots of testing QRPproject is selling the Kenwood MC
43 as best
choice together with the K2. It generates an excellent SSB
signal, it´s
9 matches
Mail list logo