I've used the AT11-MP with my K2/100 (I wanted the
metering). You should be able to use the KAT100 with
the addition of the KIO for QRP without any problem.
You can keep or sell the KIO once you go with the
KPA100. With the LDG, you just won't have the quick
band change as with the KAT100 directly
[EMAIL PROTECTED] wrote:
This is why it is so inviting to spend $150 on the LDG Z-100 or $200 on the
LDG AT-100. When I then choose to upgrade, I will only have to spend the $359
and I can continue to use the external tuner.
Any more suggestions?
Ci Jones
WU7R
FISTS 10789
NAQCC 306
Hi Ci
When my K2 was new, quite a while before the ATU kit became available,
I operated with the original LDG QRP autotuner and it worked just fine.
You should have no trouble with your autotuners, as long as they are happy
with about 3 watts input during tuning.
73, Bob N6WG
-- Origin
Ci,
Yes, there is another alternative.
There are a few methods of bringing the proper signals out of the K2 to use
the KAT100 - in fact these are the same signals that are needed for remoting
the KPA100. So you could use the same techniques as folks have used for
remoting the KPA100 without insta
Thanks to all who responded. My delemma is that if I buy the KAT 100 for use
with my K-2, I would also have to purchase either the 100 watt amp (KPA100)
for $359 (which I evenutally plan to do) or I have to have KIO2 for $89 to use
with my K-2.
So my options with Elecraft tuners are (1) to
I am considering using an LDG AT-100Pro or LDG Z-100 tuner with my K-2. My
reasoning is that I haven't upgraded to 100 watts yet, but I need a tuner now.
Also, I operate CW almost exclusively, what other K-2 options would folks
suggest. Any advice and suggestions will be appreciated.
Ci Jo
6 matches
Mail list logo
