Thanks to everyone wh o wroke and helped me. It is TX'ing again. I had TX set
on the SL too low, turned it up and Bingo!
Thanks again to everyone.
Dcik N5XRD
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecra
strangely.
Let me know if you find anything.
73,
Don W3FPR
-Original Message-
From: Jack Brindle [mailto:[EMAIL PROTECTED]
Sent: Thursday, February 03, 2005 12:06 AM
To: [EMAIL PROTECTED]
Subject: Re: [Elecraft] It Works, but "Not Inst" Message
Don;
Let me throw something else
Chris,
The 'not inst' message is normal when the NB or ANT1/2 bttons are tapped -
it is NOT normal for that message to appear when the MENU or DISPLAY buttons
are tapped or pressed.
First check the orientation of RP1 on the Front Panel board - the dot (or
stripe) on the R-PAK (RP1) must be at the
Hello,
I would like to thank everyone for responding. Unfortunately, I still
do not have this problem solved. Very frustrating! After some more
poking around, here is what I can say about this. It only happens when
I press 'Menu', not when pressing 'Display'. It is intermittent,
although it h
Hello,
Well, I got up to the power on test for K2 #4718 and it worked! Very
exciting. Prior to this, the only electronics that I had built were
Elecraft's noise generator and test oscilator, which I plan to use with
the K2.
The issue, though, is that when I tap the menu button or the display
Ian,
Double check C75 on the RF board - be certain it is 470 pf (471). You may
also want to check all the VCO range capacitors (C71 thru C75) while you are
at it too - you did change C71 to 120 pf did you not?
Nothing in the bandpass filter for 160 meters should have changed due to the
addi
Hi all,
Just thought I would let you know I fixed my problem with the 60m and
160m installs. I checked and rechecked everything and all seemed fine
which had me scratching my head. In the end, the problem was the
seating of the 60m board. I think I had the 8 pin header connected but
not the 3 pi
7 matches
Mail list logo