I've been using N3FJP AClog with my K3 for over 5 years. Just do as posted
above in the settings menu. It's just a matetr of matching the baud rate
more than anything else. All the other settings match the K3 defaults and
just make sure you have the baud rates matched.
73 Bill NZ0T
--
View
Good Afternoon:
I am a fairly new ham and new K3 owner. I have decided to try using
the N3FJP logging SW. YES I know there are others out there but this is where
I would like to start. Does any one know the K3 string to read frequency
and mode that goes in the N3FJP rig interface as
Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of gmuller...@aol.com
Sent: Thursday, December 19, 2013 9:54 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] K-3 rig interface for N3FJP
Good Afternoon:
I am a fairly new ham and new K3
Fairly certain I tried this to confirm things were working when I was debugging
issues with Writelog. The string was already setup in N3FJP when you select
Elecraft as the radio. You shouldn't have to manually enter it.
73,
Josh W6XU
Sent from my Mobira Talkman
On Dec 19, 2013, at 9:53 AM,
Maybe I don't understand your problem, but I don't know why you need the
K3 command strings. You should be able to click on the 'Settings' menu,
then click on 'Rig Interface.' On this screen select Elecraft for the
radio type, select the serial port, baud rate, etc... Then when you
click
5 matches
Mail list logo