I've ordered a K-2 and contemplate adding the KSB2 and the KAT2 someday.
Most likely will not implement any other options, mostly operate QRP CW.
I'd appreciate comments about whether the re-work eliminator kits would be
appropriate, or just an unnecessary expense.
72, Curt KB5JO
Hi Curt,
This topic has been discussed quite extensively on the reflector.
Try a search here and I'm sure you'll find some answers.
http://www.mail-archive.com/elecraft@mailman.qth.net/maillist.html
73,
Tony W7GO
Curt wrote:
I've ordered a K-2 and contemplate adding the KSB2 and the KAT2
Curt...
I put a full complement of re-work eliminators in my K2, even though I had
bought all the options - and installed them. I thought it very helpful to
just work along and not have to worry about desoldering, cutting, pulling,
etc as each option was ready. I have at one time or another
Curt,
If you only want to add the KSB2 and the KAT2, then just order the
Rework eliminator parts for the KSB2 (the KAT2 does not need any).
There is no need to install all the Rework Eliminator headers and
components - install only what you will use later.
Actually, the hardest part of the
At 21:25:23 EST on Sat 23 Feb 2008 Don Wilhelm (W3FPR) wrote ...
... If you only want to add the KSB2 and the KAT2, then just order the
Rework eliminator parts for the KSB2 (the KAT2 does not need any). ...
--
Although there are isn't a KAT2 un-module, you will have to remove the
lower
5 matches
Mail list logo