Hello all
What I did was to stick one of those double sided foam pads about 1 inch
square and 1mm thick the type you stick posters up with onto the bottom cover
then all I did was remove the backing of the pad that would be in contact with
L33 and stick a cut square of black electrical tape
Here's a very minor concern, so minor I almost didn't post it. I'm
ready to put my K2 together for the RF bd Part 2 testing alignment,
and first must put tape over the prewound L33 toroid to prevent it from
contacting the chassis. The manual says electrical tape can be used,
but that seems kind
On Fri 01-Apr-05 at 1152 EST, Mike Markowski wrote:
[...] must put tape over the prewound L33 toroid to prevent it from
contacting the chassis. [...]
On second thought, I'll put the tape on the chassis itself! :-P
Mike AB3AP
Avondale, PA
___
Mike,
I put a strip of electrical tape directly over the toroid to protect it
during the later building steps, plus I put tape on the bottom cover for
more permanent and more elegant protection. After the final assembly the
tape can be removed from the toroid if you remember it (it is not
You can get quality 3M electrical tape at Home Depot/ Lowe's in various
colors to have something that does not look like electrical tape. White
is available, orange, and many other colors.
You can use a wide tape, such as the clear vinyl tapes sold at home centers.
While Scotch type tapes will
; elecraft@mailman.qth.net
Subject: Re: [Elecraft] K2 L33 (BFO) - aesthetics adhesives
You can get quality 3M electrical tape at Home Depot/ Lowe's in various
colors to have something that does not look like electrical tape. White
is available, orange, and many other colors.
You can use a wide tape
That's heat resistant tape put one during the powder coating. It's really
tough stuff.
Bob
WB6KWT
- Original Message -
From: EricJ [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent: Friday, April 01, 2005 3:03 PM
Subject: [Elecraft] K2 L33 (BFO) - aesthetics adhesives
I'd find
Subject: Re: [Elecraft] K2 L33 (BFO) - aesthetics adhesives
On Fri 01-Apr-05 at 1152 EST, Mike Markowski wrote:
[...] must put tape over the prewound L33 toroid to prevent it from
contacting the chassis. [...]
On second thought, I'll put the tape on the chassis itself! :-P
Mike AB3AP
Avondale
8 matches
Mail list logo