In running the final Resistance Checks on p. 71 of the K2 manual, I only get
1.7 ohms at the Q7 collector. The manual says I should get 500 ohms. When I
study the schematic, I can't see where the 500 ohms is supposed to come from
since Q3 is connected across Q7 and Q8 collectors and the 12V
Hi Gary,
Yes, you are also looking at the 12 volt line.
Only 1.7 ohms is too low. Look at your meter. Is the positive lead
at Q7 - if not you could be turning on D12 on the 12 volt feed. That's
a reverse polarity protection diode. Also, the resistance readings don't
come out right if your
Gary,
You have a short (or at least a very low resistance) to ground somewhere in
the PA collector circuit or on the +12 volt line.
The easiest first step in isolating it is to remove the heat sink. The tabs
on the PA transistors are connected to the collector, and the thermal pads
are
3 matches
Mail list logo
