Looks like I missed Don's earlier response. Sorry for taking up the
bandwidth.
Scott
AD5HS
On 9/2/2018 6:30 AM, Ted Salmon wrote:
The encoder plus attached PC board is attached to the Front Panel with a lock
washer and 1/2" hex nut on the encoder shaft. The diameter of the hole on my
Front
Ted,
1. The nut and washer go on the "outside", that is, the front facing
side of the front panel behind the main VFO knob. The encoder shaft has
to be fully seated on the inside of the front panel with the encoder
shaft extending a good distance out, then tighten the nut and washer on
the
Ted,
I am afraid you have ruined the front panel metalwork.
The best solution is to purchase new Front Panel metalwork. Enlarge the
hole for the threaded part of the encoder just a bit. I use a thin
knife blade and 3 or 4 passes with it inside the encoder hole will do
the job nicely.
The
The encoder plus attached PC board is attached to the Front Panel with a lock
washer and 1/2" hex nut on the encoder shaft. The diameter of the hole on my
Front Panel was 10 mm as measured with my calipers. The diameter of the
threaded mount on the encoder is ~ 9 mm while the diameter of the ring
4 matches
Mail list logo