Ken,
Gradually, the reference to body color is being dropped from the
Elecraft manuals since that body color is changeable at the whim of the
component manufacturer/supplier.
A 10 uHy RF Choke is a 10 uHy RF Choke, no matter what its body color
may be, so ignore the 'tan' or 'green' and go by t
Hello All,
I'm doing the inventory on a K2 that's been sitting for a while. Building it
for a friend. Not sure of the serial #. Around 5900 I think. The manual is
January 2004 REV F.
Problem is with RFC4,5,8,9, 10uh solenoidals (E690009).
I have 4 "tan" brown-black-browns. The manual on page
Bill,
Look at the last two resistors on the Bandolier. That is where mine
were on #4248.
Laurie, VE1AWJ
- Original Message -
From: "Bill Scovell" <[EMAIL PROTECTED]>
To:
Sent: Sunday, July 04, 2004 2:46 AM
Subject: [Elecraft] K2 inventory question
Just completing
SN4355 has the resistors on the strip. So far, so good, I'm past the
initial checks on the RF board (i.e. my control board and front panel
work).
I got an incredible headache sorting the caps. My wish for future
builders: sort parts in a more sensible order so the RF board parts are
divided into
The two resistors should also be on the bandolier.
73
Johnny VR2XMC
- Original Message -
From: "Bill Scovell" <[EMAIL PROTECTED]>
To:
Sent: Sunday, July 04, 2004 1:46 PM
Subject: [Elecraft] K2 inventory question
Just completing inventory check for my second K2 (#4313
Bill,
Elecraft continually improves things - we all know that. So now you will
find R50 and R58 on the strip of resistors - at least they were that way for
SN4192 when I assembled it. Yes, it has not always been that way - those
resistors were previously shipped loose in the RFb bag, so your mem
Just completing inventory check for my second K2 (#4313)all well except can't
find R50 and R58 (both 1/2 watt so not on the bandolier) are these normally
loose in the RFb bag? or do they lurk in some other spot and I've had a senior
moment and missed them?. I wouldn't normally bother the reflect
7 matches
Mail list logo